How to return values in calls to subsequence?
I want to call a sous-suite. I pass parameters to this subsequence but I want too return values. Is it possible to return values other than using globals?
-Pat
Hello
You can set the parameter as "pass by reference". Right mouse click on the setting you are interested in and you will find this setting.
Concerning
Ray Farmer
Tags: NI Software
Similar Questions
-
How to return values from the record following instead of in the same record in LOV
Hi all
I use Forms 10 G.
I have a block of details. In what in the 3rd column, I have a LOV.
My requirement is let say I asked for it from the 1st and 2nd column, and it shows 1 record.
After that if I pressed F9, then it should display the LOV list and, when I select a value any then it will create a new record with the same value of 1st and 2nd column.
Example: -.
Agenda provider country 123 ABC India We here in the column 'Country' LOV. Then when I pressed F9 then Lov should be displayed.
as below.
List of countries India U.S.. Japan It works very well so far.
Now if I select from the USA in the list then it should create a new record with the values of 1st and 2nd column.
Agenda provider country 123 ABC India 123 ABC Japan How can I do this?
Besically I need, rather than return the value in the same record, he must return to the next with the exsiting values record.
The algorithm is:
-use the KEY-LISTVAL about to 'COUNTRIES '.
-LOV execution using builtin show_lov
-store the return value Lov any parameter or a local variable in your trigger code ( vL_dummy_Deger varchar2 (100); )
-Create registration
-assign value to any new item you want to
code like this:
declare
vLDummy boolean;
vL_dummy_Deger varchar2 (100);
Start
-lov runs lov ruturns value is assigned to all the dummy elements to store Lov, return value. (no need to display)
"-" DUMMY "point lets store lov, return value.
vLDummy: = show_lov ('LOV_ULKE');
--
vL_dummy_Deger: =: model;
create_record;
: new_item: = vL_dummy_Deger;
end;
-
How return values when the page of the ofa procedure call
Hello
I need to return multiple values in the OPS page calling procedure.i using below code.bt I'm able to return a single value. Please suggest me how to return multiple values.
Co:
-----
If (pageContext.getParameter ("Calc")! = null) {}
Vo1 OAViewObject = (OAViewObject) am.findViewObject ("AddonBillingVO");
System.out.println ("VO");
{if(VO1!=null)}
CNT int = vo1.getRowCount ();
System.out.println ("count:" + cnt);
If (cnt > 0)
{
RowSetIterator rs = vo1.createRowSetIterator("empIterator");
System.out.println ("EMP");
If (rs! = null)
{
While (rs.hasNext ())
{
AddonBillingVORowImpl line = rs.next ((AddonBillingVORowImpl));
System.out.println ("impl");
If (line! = null)
{
String laseid = row.getAttribute("LeaseId").toString ();
System.out.println (laseid);
String billingid = row.getAttribute("AddonBillingId").toString ();
System.out.println (billingid);
[Serializable] param = {}
laseid, billingid
};
String newupc = (String) am.invokeMethod ("callPLSQLProc", param);
System.out.println (newupc);
String myValue = newupc;
OAMessageTextInputBean textBean = (OAMessageTextInputBean) webBean.findChildRecursive ("prorate");
textBean.setValue (pageContext, myValue);
}
}
AM:
--------
public String callPLSQLProc (String laseid, String billingid)
{
OracleCallableStatement callableStatement = null;
Try
{
String callProc = "BEGIN LEASE_PRORATE_PKG. LEASE_PRORATE_PROC1 ' + '.
"(p_lease_id = >: 1,» +)"
' p_billing_id = >: 2 +,
"(p_prorate = >: 3) +;
'END;';
callableStatement (OracleCallableStatement) = getOADBTransaction ().createCallableStatement(callProc,1);
callableStatement.setInt (1, Integer.parseInt (laseid));
System.out.println (laseid);
callableStatement.setInt (2, Integer.parseInt (billingid));
System.out.println (billingid);
callableStatement.registerOutParameter(3,OracleTypes.VARCHAR,255);
callableStatement.execute ();
String resultMessage = (String) callableStatement.getString (3);
System.out.println (resultMessage);
Return resultMessage;
}
catch (System.Exception e)
{
e.printStackTrace ();
System.out.println ("execepn");
throw new OAException (try (), OAException.ERROR);
}
Khalil.
Hello
You are the PL/SQL procedure in a loop on the right? Just assign the value to the attribute appropirate.
if (pageContext.getParameter("Calc")!=null) { OAViewObject vo1 = (OAViewObject)am.findViewObject("AddonBillingVO"); System.out.println("vo"); if(vo1!=null) { int cnt = vo1.getRowCount(); System.out.println("count :" + cnt); if (cnt > 0){ RowSetIterator rs = vo1.createRowSetIterator("empIterator"); System.out.println("emp"); if (rs != null){ while (rs.hasNext()){ AddonBillingVORowImpl row = (AddonBillingVORowImpl) rs.next(); System.out.println("impl"); if (row != null){ String laseid = row.getAttribute("LeaseId").toString(); System.out.println(laseid); String billingid= row.getAttribute("AddonBillingId").toString(); System.out.println(billingid); Serializable[] param = { laseid,billingid }; String newupc = (String) am.invokeMethod("callPLSQLProc",param); System.out.println(newupc); //String myValue = newupc ; //OAMessageTextInputBean textBean = (OAMessageTextInputBean)webBean.findChildRecursive("prorate"); //textBean.setValue(pageContext, myValue); row.setAttribute("Prorate",newupc); } } } } } }
Check the last lines. If the attribute name is nothing else than "Pro rata", updated accordingly.
See you soon
AJ
-
How to get the return value of the method by calling the stored procedure in ApplModuleImpl
Hello
I use Jdev 10.1.3.4
JSF, and ADF business components
I created a service method in the implementing class of module request to execute the strored procedure in the database.
This breeding returns a string value.
now, I slipped the method of service of data control palette on my JSF page and chose ADF parameter form when I droped.
It works very well.
now, I want to display the string returned by the method of service after the execution on the JSF page as global messages.
How can I achieve this.
Help, please
Thanks in advance
Kind regards
Ajit AgarwalHello
You must run programmatically run the method binding. If I'm not wrong then the following code will allow you to access the return value
OperationBinding oper = bindings.get("MyPLSQLAccessMethodBinding") (OperationBinding);
String returnValue = oper.execute ((String));Once you have the string in a managed bean you can add it to the stack of messages JSF exposed by the FacesContext
Frank
-
Calling a function multiple return values...
Hello
I wrote a simple function 2 return values. It comes to my own understanding.
create or replace function func1 (empid number)
Return number
is
number of SAL;
number of deptID;
Start
Select the wage in sal of employees where employee_id = empid;
Select department_id from deptid from employees where employee_id = empid;
return of sal;
deptid return;
end;
I tried to call the function like below: -.
declare
number of performance(1);
Result2 number;
Start
performance(1): = func1 (101);
Result2: = func2 (101);
dbms_output.put_line(result ||) '' || Result2);
end;
output:-1700 1700
the salary was posted twice.
I understand that the second query has not been taken into account.
Please let me know how this can be achieved.
Thanks and greetings
Here is an example of functions Oracle return multiple values - dBforums:
CREATE or REPLACE TYPE pmc_tab AS TABLE OF NUMBER;
CREATE TABLE v_stats_daily (start_date date, number of Field1, Field2 number, field3 number);
INSERT INTO v_stats_daily VALUES('08-OCT-2003',10,20,30);
INSERT INTO v_stats_daily VALUES('08-OCT-2003',40,50,60);
INSERT INTO v_stats_daily VALUES('08-OCT-2003',70,80,90);
CREATE OR REPLACE FUNCTION PMC_STATS
(pStatDate Date) IS BACK pmc_tab
MyArray pmc_tab;
NUMBER of vstat1;
NUMBER of vstat2;
NUMBER of vstat3;
BEGIN
MyArray: = pmc_tab();
SELECT sum (Field1), sum (field2), sum (field3)
IN vstat1, vstat2, vstat3
OF v_stats_daily
WHERE the arguments start_date = pStatDate;
MyArray.EXTEND;
MyArray (1): = vstat1;
MyArray.EXTEND;
MyArray (2): = vstat2;
MyArray.EXTEND;
MyArray (3): = vstat3;
RETURN MyArray;
END;
/
Set serveroutput ON
DECLARE
MyDate DATE;
MyArray pmc_tab;
I have SEVERAL;
numOut NUMBER;
BEGIN
MyArray: = pmc_stats('08-OCT-2003');
dbms_output.put_line (' number of Table: ' | to_char (myArray.Count));
FOR i IN 1.MyArray.last LOOP
numOut: = MyArray (i);
-If numOut is null then
dbms_output.put_line (' value: ' | to_char (numOut));
-end if;
END LOOP;
END;
/
/
Table number: 3
Value: 120
Value: 150
Value: 180
PL/SQL procedure successfully completed.
/
Post edited by: Elya
-
How to pass values from method to method of CO AM return?
Hello
On my personal page, I have a method in the AM. This method calls a PL/SQL package to get some values in the database.
I need to return values to my CO thos where I called the AM method. How to do that.
Already, I did the following:
in CO
String ledgerId = null;
String ledgerName = null;
String countedLedgers = null;
String budgetVersionId = null;
String budgetName = null;
[Serializable] parameters = {ledgerId
ledgerName
countedLedgers
budgetVersionId
budgetName
};
OAApplicationModule am = pageContext.getApplicationModule (webBean);
am.invokeMethod ("getLedgerData", parameters);
in AM
public void getLedgerData (String LedgerId
String LedgerName
String CountedLedgers
String BudgetVersionId
String BudgetName
)
throws SQLException
{
......
After call to PL/SQL
......
After running you can get the value of a pl/sql block production
ledgerId = callPLSQLStmt.getString (1);
ledgerName = callPLSQLStmt.getString (2);
countedLedgers = callPLSQLStmt.getString (3);
budgetVersionId = callPLSQLStmt.getString (4);
budgetName = callPLSQLStmt.getString (5);
callPLSQLStmt.close ();
System.out.println ("AM Ledger Info: ledgerId:" + ledgerId);
System.out.println ("AM Ledger Info: ledgerName:" + ledgerName);
System.out.println ("AM Ledger Info: countedLedgers:" + countedLedgers);
System.out.println ("AM Ledger Info: budgetVersionId:" + budgetVersionId);
System.out.println ("AM Ledger Info: budgetName:" + budgetName);
LedgerId = ledgerId;
LedgerName = ledgerName;
CountedLedgers = countedLedgers;
BudgetVersionId = budgetVersionId;
BudgetName = budgetName;
....
Thus, upon his return in the central, what should I do to get these values on 'settings [Serializable]", which I've provided?
The end result should be to bring them to the screen...
Thank you
RonnyHe is sure to get the values using the hash table.
The AM procedure would be something similar to
public HashMap getLedgerData (String pLedgerId)
)
Can be used get pLedgerIdto results... If you already know the value so no need for this parameter
Run your PL/SQL
HashMap ledgerDetailsHash = new HasnMap();
ledgerDetailsHash.put ("LedgerId", value1);
ledgerDetailsHash.put ("LedgerName", value2);
ledgerDetailsHash.put ("CountedLedgers", value3);
.......Return ledgerDetailsHash;
}Your call to CO's going to be
HashMap resultMap = (HashMap) am.invokeMethod ("getLedgerData", parameters, where applicable);
String LedgerName = resultMap.get ("LedgerName");
......Kind regards
Stephanie. -
Hi all
I'm calling javascript from COM (c#) and it works fine. Passing parameters to javascript and playback by using the syntax of the [x] arguments also works very well.
What I can't seem to get to work is to know how to move something from javascript to the calling COM Summoner, in this case, c#. How and where should I place the return value in javascript?
Thanks in advance.
Rachiud
doScript() evaluates an expression, so just make sure that your Javascript is an expression.
For instance "(3 + 3)" 6 "
-
How to return two values of a function?
Hi all
I have a function which returns a varchar2 value. This value is used in the SQL of a ref cursor
Now I want this function returns two values. I tried to use varray, but could not accomplish the task.
Can you tell me how can I find the two values from a function? and how this function can be called in a SQL query?
Thank you very muchThe query should look like:
SELECT v.col.name AS name , v.col.flag AS flag FROM ( SELECT kk_test_kk(t.somecolumn,t.someothercolumn,42) AS col FROM sometable t ) v;
Note that you need to prefix with the name of view inline ('v' in the example) and the expression of the function ('col' in the example).
-
Hello
I have setup a COM interface for TestStand (TS) to run some scripts in TestComplete (TC). Normally, when TestComplete has finished executing the script, it returns a 0 or 1 to designate the success/failure during the TestStand step (step test for example String value). It worked well.
However, now I need TestComplete to regain a vaule (e.g. 32) TS and TS need to assess this value in a while statement. So if the TC value is 32, I would have some statement in TS ike:
While (return value! = 30)
Do something...
Thank you
Jigg,
No, the program does not have a new thread. It's just a single sequential thread. She called other sequential files, and that's all.
I think I'll have some luck with the StationGlobal. It seems to work (for example by setting the StationGlobal a single sequence file automatically updates the Stationglobal in another movie file, sort of like passing the reference value)
Thank you!
-
How the two function return values
Dear all,
Please explain, how the two values of function return?
give a simple example.
OK, a few examples...
First example, using a type of structured on the database object:
SQL > create or replace type tMyValues as an object (yr number, number, number of dy mn)
2.Type of creation.
SQL > create or replace function getMyValues return tMyValues is
2 number of y: = extraction (year sysdate);
number of 3 m: = extraction (sysdate months);
number of 4 d: = extract (day of sysdate);
5. start
6 return new tMyValues(y,m,d);
7 end;
8.The function is created.
SQL > set serverout on
SQL > declare
2 myValues tMyValues;
3. start
4 myValues: = getMyValues();
5 dbms_output.put_line (' year: ' | myValues.yr);
6 dbms_output.put_line (' month: ' | myValues.mn);
7 dbms_output.put_line (' date: ' | myValues.dy);
8 end;
9.
Year: 2015
Month: 4
Day: 1PL/SQL procedure successfully completed.
Second example, using an associative array within PL/SQL:
SQL > set serverout on
SQL > declare
2 type tMyValues is table of the index number to varchar2 (10);
3 myValues tMyValues;
4
5 function getMyValues return tMyValues is
6 retValues tMyValues;
7. start
8 retValues ('Year'): = extraction (year sysdate);
9 retValues ('Month'): = extraction (sysdate months);
10 retValues ('Day'): = extract (day of sysdate);
11 return retValues;
12 end;
13. begin
14 myValues: = getMyValues();
15 dbms_output.put_line (' year: ' | myValues ('Year'));
16 dbms_output.put_line (' month: ' | myValues ('Month'));
17 dbms_output.put_line (' date: ' | myValues ('Day'));
18 end;
19.
Year: 2015
Month: 4
Day: 1PL/SQL procedure successfully completed.
For the pipeline functions, see the example I wrote on the link provided by ReemaPuri (answer No. 3) that I don't need to re - write what I did before.
-
How to set the return value of the method to the /outputText inputText field
Hello
How to set output return value method of a /outputText adf inputText field
Concerning
sevanan
Well put method's return value to a managed bean variable.
Create a variable in the bean and set the return value to this variable.
the inputText and outputTextValue to this managedBean.variable value
That's all...
and add partial trigger for inputText programmaticly
-
How to get the return value of the activity of the method in the stubborn workflow
Hi all
I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0
I have a stubborn workflow, default activity is a call method than calling a method in the app module
This method returns an id
I need this code in my project to do something else
Is there a way I can access the return value of the method call activity?
Concerning
MohsenSet the value of return as #{{pageFlowScope.myBean.returnValue} pageFlowScope.myBean.returnValue} in the method, call the property inspector and get the value in your managed bean.
String returnParam = (String) JSFUtil.getFromPageFlow ("returnValue");
-
vmrun return value? How to tell a script execution vmrun host-side errors?
Host: MacBookPro, OSX 10.4.11, core 2 duo, 2 GB ram
Client: Windows XP with service pack 3 installed
Apart from something like this:
if vmrun -T fusion -gu Administrator -gp pass copyFileFromGuestToHost /Users/me/Documents/Virtual\ Machines.localized/Windows\ XP\ Professional.vmwarevm/Windows\ XP\ Professional.vmx "c:\CyberExtruder\Flixor\dst\im_mesh.obj" /Users/me/fromVMWareWin32/im_mesh.obj &> /dev/null; then returnValue=0; else returnValue=1; fi
Where I create a return value for vmrun of the existence of an exit error message... Another way to know if a call to vmrun succeeded?
Although I am simply called copyFileFromGuestToHost in this example, I'm working on a side script host running several programs on the client that may fail. I can tell if they fail for lack of output files, so if a fails to CopyFileFromGuestToHost I know that just called comments executable failed.
Advice?
The standard * NIX is to return error codes via the variable $ shell? Thus, for example:
etung$ /Library/Application\ Support/VMware\ Fusion/vmrun list (output omitted) etung$ echo $? 0 etung$ /Library/Application\ Support/VMware\ Fusion/vmrun something-that-doesnt-exist Error: Unrecognized command: something-that-doesnt-exist etung$ echo $? 255
-
How to fill in the right side of the shuttle with display/return values?
Hello
I know, the right way to fill in the right side of the shuttle's only:
It is comfortable for the user to see the name of the profile.declare v_list apex_application_global.vc_arr2; begin select profile_name return_value bulk collect into v_list from user_profiles where user_id = :p61_user_id; return (apex_util.table_to_string (v_list)); end;
However, I need a profile_id as return value, as I have on the left side of the shuttle.
The left side of the shuttle is filled with a selection list with display/return values, as you know.
I need both sides of the shuttle to return profile_id in order to create a merger.
How is it possible to fill the right side of the shuttle with display/return values?Make a selection list on the left side of the shuttle to return profile_name as return value as well.
In this way, the two parts of the shuttle will return the same value, which could be used as a State of fusion. -
How to get the return value from Java runtime.getRuntime.exec?
I am running shell from a (GR 11, 2) Oracle database commands on aix.
But, I would get a return value of a shell comand... as you get with "echo $?"
I use a code like
but I do not get a return value... because I don't know how to get the return value...CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS import java.io.*; public class Host { public static int executeCommand(String command) { int retval=0; try { String[] finalCommand; finalCommand = new String[3]; finalCommand[0] = "/bin/sh"; finalCommand[1] = "-c"; finalCommand[2] = command; final Process pr = Runtime.getRuntime().exec(finalCommand); pr.waitFor(); } catch (Exception ex) { System.out.println(ex.getLocalizedMessage()); retval=-1; } return retval; }; /
Published by: user9158455 on 22-Sep-2010 07:33Hello
Your pr.exitValue () has tried?
I think you also need a finally block that destroys the sub-process
Concerning
Peter
Maybe you are looking for
-
How can I display the first image of a built-in clip?
I prepare a presentation for my 10.11.16 retina, with Keynote 6.6.1 MacPro OSX. I want that it contains clips integrated to my films. I chose the simplest theme - plain black. I drag and drop these Quicktime movies or .mov of iTunes to a new black s
-
Satellite A660 - multimedia keys are disordered
Hi and sorry for my English I have a Satellite A660 - 12th and recently after reinstalling windows and all the other drivers (VAP, HW, etc.), multimedia keys, are disordered, so the wireless open windows media, the Toshiba shorcut edge player on/off
-
Just got a new Toshiba NB255 today... when I look at the networks without wire around mine shows up... it is not guaranteed... I can not connect with her. My other laptop Toshiba works fine. I can connect with the Netbook with a wire but it is not wh
-
Microsoft sounds tell you that you have a problem with your laptop
I get phone calls from microsoft telling me that I have problems with my laptop, fact microsoft rinng you.
-
Automatically building scripted projects
HelloI am a fairly new user to Robohelp 9.0.2. I am generation html from the related Word documents help. A number actually. I would like to somehow automate the build process, where I am writing a script to open a Robohelp project, updated to reflec