How to rotate view while in a document on the mobile app?

Similar Questions

• How to rotate my office of 90 degrees to the right so I can read without turning my head to the side?

  Original title: guidance office

  How to rotate my office of 90 degrees to the right so I can read without turning my head to the side?

  Thank you very much

  Very often caused by cats or other pets stray free!

  Hold down the Alt and Ctrl key and try the up/down/left/right arrows to change the rotation of the screen. Sometimes this has no effect, but I hope that you will be lucky, or it can become a little involved because it depends on your display driver software. Somewhere in your driver software display, accessible from the Control Panel/display/settings/advanced, there should be a screen rotation option. Unfortunately, each pilot is likely to be unique in the way that you pick this option and, unless I had the same driver, I couldn't give you anything more than general advice already given.

  Tricky

• How to rotate a selection of stamps cloned using the keyboard (windows os)

  So, I use the clone stamp and have my floating selection on my screen. My question is... How to rotate the keyboard? I've done it before, but can't remember the key.

  Thanks in advance if you can help.

  Thanks for your help guys... but I found the solution here http://www.youtube.com/watch?v=rrNgJZkUd9M

• How can I get my C7280 scan documents since the charger?

  Maybe it's obvious, but I can't get my HP C7280 scanning documents that I put in the tray to be analyzed one by one, through the feeder. What happens is that I get the receipt tone she knows there are documents in the feeder, but when I press the scan to the computer, it does not use the charger and I find myself with an empty scan!

  Is there some setting or secret for her to know, hey I put documents into the feeder, so feed them, scan them, and repeat until the vacuum. Thanks for the help!

  Dan

  When you scan to and to?   I just scanned a document from the charger, I used the HP Solution and the Panel before, Photosmart and it worked.  I don't want to insult you, but you have the face to print up? I checked if there could be that button magic but not that I can see. If you click the change setting button the only options in there are material (glass or Charger) and photo (glass or Charger) I guess the printer detects where you place the document to be scanned and takes it from there.

• How can I associate with another FrameMaker document in the same book using hypertext markers?

  I would like to make a link to a separate FM in the same book using hypertext markers file, but I do not know what as the prefix to use. If I would say normally, "gotolink x" to bind to a hypertext marker in the same document of FM, what do I need add or change if I want to put a link to a brand in a different document in the same book? I remember seeing something on the addition of the name of file the text marker a few years ago, but I can't find the discussion more. Thank you!

  Just use the construction of filename:linkname of gotolink , where the linkname is what is inserted using the marker NewsLink .

• Keep a playlist open and prevent the lock screen while playing a playlist in the music App

  I teach spin and you want my playlist to stay open so I can watch the time on my songs in order to teach students what to do... How can I do this? And it prevent my phone lock screen mode?

  You must go to settings > auto lock > Never while you were teaching. The device that prevents from lock screen mode.

  You can then view your time on the playlist directly, or by dragging the Panel, which displays your information of music as well.

  See you soon,.

  GB

• allowing a view 3d on the mobile app?

  I have just updated the Acrobat Reader DC on my desk and realized that I didn't have the corresponding app on my phone. I got from Google game and tried to open an attachment. It was a picture of the 3D model, but when a player open, I couldn't see the thing.

  HOW CAN I ACTIVATE THE 3D ON THE MOBILE VIEW?

  Hi davidt67137267,

  I'm sorry, but Acrobat Reader mobile DC is not capable enough to display the 3D PDF.

  Kind regards
  Nicos

• Synchronization of documents using the mobile links

  How do you synchronize documents in PDF formats between devices?

  Make sure that you have updated to the latest versions of Acrobat DC on your computer and mobile devices.

  Turn on the Mobile link button. You will find at the bottom of the Home tab on your laptop/desktop computer. On my iPhone I find in the top right corner (icon), a phone. Same thing on my iPad.

  Also, make sure that you are connected to the same Adobe ID. The Adobe ID, is what connects your devices to the same collection of PDFs on the Adobe server.

  After that, the process is usually automatic. You will see files recently opened in the recent article in your device.

• How can I set 100% width my slideshow on the mobile version

  Hello!

  It's been a while I needed to ask this question here, but a huge problem of authentication of the ADOBE forum took months to be resolved by them.

  In any case, I have a site made with muse (office). I tried to decline in Tablet and picture version as he said it be easy to notice muse video team.

  But the sideshow photo do not behave in the mobile version as expected.

  http://Demis.nu/phone/modeles.html

  the worst is the orientation to landscape. The pictures are just great for the screen.

  I tried 100% width and cancelled, I tried to resize the size of the photo to fit on both sides of the page... anyway, everything I tried was not satisfactory.

  I know that the solution is to make sensitive, but I couldn't be able to find a way to do it in Muse.

  I tried the demo of muse in the first hours (2011) and years after that it is obvious that the adobe team muse understood design rules sensitive everything and I'm sure that they implemented, but can't find it.

  Can someone give me help please because the version of the phone is online and is horrible.

  Thank you very much.

  Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.

  What's new: news summary

  Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  Delicate design:

  Adobe help Muse | Create responsive Web sites

  Adobe help Muse | Responsive web design in Adobe Muse

  Adobe help Muse | Migrate existing Adobe Muse Web sites to answer

  Tutorials

  To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):

  - https://helpx.adobe.com/muse/how-to/create-responsive-website.html

  Create a sensitive webpage with Adobe Muse:

  - https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)

  Thank you

  Sanjit

• How can I view more than one document at a time?

  I had an upgrade for some reason yesterday, and now I can see only one document at a time? I need to be able to view more than one side by side?

  With the new updates, Acrobat Reader uses default interface with tabs (like most browsers).

  To view two documents side by side in different windows (rather than the different tabs), just drag a tab out of the window of the player and it should become a new window!

  If you want to permanently disable the interface to tabs, you can uncheck "Open documents as new tabs in the same window" in the General preferences (go to Edition |) Preferences).

• How to rotate screen 90 degrees - I read on the side

  Somehow my computer screen Dell laptop, Inspiron rotate right 90 degrees while I read on the side with my head tilted to the right.  How can I fix it by rotating the screen 90 degrees to the left?

  Right-click on the desktop, choose the resolution of the screen and then change the Orientation to landscape and apply the setting.

• How to get an overview of a document within the framework in my application

  Hello

  I have an ADF project that integrates with Cloud Computing service for the oracle document

  I can download, download, create folder, delete the folder and file list version using my ADF application.

  My problem is one which is how can I preview the document on cloud of in my adf page. I don't want to download the file, I want to see it.

  I tried to accomplish this task, but I faced this error

  but this error occurs

  java.lang.RuntimeException: failed: HTTP error code: 400

  State Info: Bad Request

  
  

  What follows is the source of the page

    <af:panelStretchLayout id="psl1" binding="#{backingBeanScope.backing_WEBINF_fragments_previewDoc.psl1}"
                             dimensionsFrom="parent" topHeight="250px" endWidth="50px">
          <f:facet name="center">
              <af:panelBox text="Preview Area" id="pb4"
                           binding="#{backingBeanScope.backing_WEBINF_fragments_previewDoc.pb4}" type="stretch"
                           styleClass="AFStretchWidth">
                  <f:facet name="toolbar"/>
                  <af:inlineFrame id="if1" source="#{cloud.frameSource}" partialTriggers="b1"/>
                
                 
              </af:panelBox>
          </f:facet>
          <f:facet name="top">
      <af:panelBox text="Preview Uploaded File By File ID" id="pb2">
                      <f:facet name="toolbar"/>
                          <af:inputText label="Enter File Id" id="it1"                                     
                                        value="#{cloud.fileId}" placeholder="Copy and paste the file id here"/>
                          <af:button text="Preview" id="b1"                                 
                                     action="#{cloud.viewFileAction}"/>
                     
                  </af:panelBox>
              </af:panelGroupLayout>
  

  When the user click on the Preview button, the document should be included as part of the line

  It is the method that returns the string url of the document. To be honest, as this method is not mine, I took this post How to integrate oracle doucument cloud service at my request

  And I add a few modifications to this

  public String getFileUrl() {
  
  
          //Read properties file to get host, port, contextroot, username, password
          try {
              m_protocol = SamplesUtils.readConfigFileValue("protocol", m_cfgFilePath);
              m_host = SamplesUtils.readConfigFileValue("host", m_cfgFilePath);
              m_username = SamplesUtils.readConfigFileValue("username", m_cfgFilePath);
              m_password = SamplesUtils.readConfigFileValue("password", m_cfgFilePath);
              m_contextroot = SamplesUtils.readConfigFileValue("contextroot", m_cfgFilePath);
          } catch (Exception e) {
              e.printStackTrace();
              System.out.println(e.getMessage());
              return;
          }
  
  
          try {
              Client client = SamplesUtils.getClient();
              String resourceStr = m_protocol + "://" + m_host + "/" + m_contextroot;
              System.out.println("Calling GET on " + resourceStr + m_restresource);
              WebResource webResource = client.resource(resourceStr + m_restresource);
              String authString = m_username + ":" + m_password;
  
  
              try {
                  authString = DatatypeConverter.printBase64Binary(authString.getBytes("UTF-8"));
              } catch (UnsupportedEncodingException e) {
                  e.printStackTrace();
              }
  
  
              ClientResponse response =
                  webResource.header("Authorization", "Basic " + authString).post(ClientResponse.class);         
            
              if (response.getStatus() != 200) {
                  throw new RuntimeException("Failed : HTTP error code: " + response.getStatus() + "\nStatus Info: " +
                                             response.getStatusInfo());
              }         
              Item item = response.getEntity(Item.class);
  
  
              //To print out all folder and item info, just call toString on the Object. A little verbose, however.
              System.out.println(item);
  
  
              //Print out individual top level variables of FolderItems object
              System.out.println("*************************************************************************");
              System.out.println("Name: " + item.getName());
              System.out.println("Owned by: " + item.getOwnedBy().getDisplayName());
              System.out.println("Created by: " + item.getCreatedBy().getDisplayName());
              System.out.println("Modified time: " + item.getModifiedTime());
              System.out.println("Id: " + item.getId());
              System.out.println("Parent Id: " + item.getParentID());
              System.out.println("ErrorCode: " + item.getErrorCode());
              System.out.println("Size in bytes: " + item.getSize());
              System.out.println("Version: " + item.getVersion());
              System.out.println("*************************************************************************");
  
  
  
  
          } catch (Exception e) {
              e.printStackTrace();
          }
    return resourceStr+"applinks/file/"+item.getId()
      }
  

  You have a bad request. You are not passing in the attributes assignerUser and role on the URL that is required to create Applink. You pass to one these two parameters in like a load of JSON or URL params.

  JsonPayload String = "{\"assignedUser\":\. "" + m_assignedUser + "\",\"role\":\ " » » + m_role + « \ »} » ;

  Or on the URL:

  /API/1.1/applinks/file/DCA4BBA0908AE2F497832BC2T0000DEFAULT00000000?assignedUser=someusername&role=Downloader

  Example below shows passing as a string in JSON format.  I also atrtached the POJO AppLink.java I use entitled it the answer, so the values are accessed.

  
  /* ********************************************************************************************************************
   * Sample class to create an AppLink using POST against document cloud using the Jersey API.
   * Tested on JDeveloper 12c, with libraries JAX-RS Jersey (Bundled) and JAX-RS Jackson (Bundled) attached to project. JDK 1.7.
   *
   * Compile jar list includes:
   * javac -classpath C:\JDeveloper\mywork\JerseyRestClient\Project1\classes;C:\jdev12\oracle_common\modules\asm-3.1.jar;C:\jdev12\oracle_common\modules\jersey-core-1.18.jar;C:\jdev12\oracle_common\modules\jersey-server-1.18.jar;C:\jdev12\oracle_common\modules\jersey-servlet-1.18.jar;C:\jdev12\oracle_common\modules\jersey-json-1.18.jar;C:\jdev12\oracle_common\modules\jersey-client-1.18.jar;D:\JerseySamples\modules\jersey-multipart-1.12.jar C:\JDeveloper\mywork\JerseyRestClient\Project1\src\project1\DCJerseyClientTestGet.java
   *
   * Update the config.properties file for the POST request to run the desired Documents Cloud service.
   * Update the m_assignedUser to any user id. User can be a provisioned user id, or a non-provisioned ad-hoc value.
   * Update the role to be viewer, downloader, or contributor
   *********************************************************************************************************************/
  
  package documents.cloud.restsamples;
  
  import com.sun.jersey.api.client.Client;
  import com.sun.jersey.api.client.ClientResponse;
  import com.sun.jersey.api.client.WebResource;
  
  import documents.cloud.pojos.AppLink;
  
  import java.io.UnsupportedEncodingException;
  
  import javax.xml.bind.DatatypeConverter;
  
  public class CreateFileAppLink {
      // Configuration values. May need to change m_cfgFilePath to point to properties file if at a different location.
      static public String m_cfgFilePath = "src/documents/cloud/restsamples/config.properties";
      static public String m_protocol, m_host, m_username, m_password, m_contextroot = null;
      //Rest resource needs a valid GUID for the file to copy
      static public String m_restresource = "/api/1.1/applinks/file/DCA4BBA0908AE2F497832BC2T0000DEFAULT00000000";
      //Payload parameters needed for POST
      static public String m_assignedUser = "MyTestUser";
      static public String m_role = "viewer";
  
      @SuppressWarnings("oracle.jdeveloper.java.semantic-warning")
      public static void main(String[] args) {
  
          //Read properties file to get host, port, contextroot, username, password
          try {
              m_protocol = SamplesUtils.readConfigFileValue("protocol", m_cfgFilePath);
              m_host = SamplesUtils.readConfigFileValue("host", m_cfgFilePath);
              m_username = SamplesUtils.readConfigFileValue("username", m_cfgFilePath);
              m_password = SamplesUtils.readConfigFileValue("password", m_cfgFilePath);
              m_contextroot = SamplesUtils.readConfigFileValue("contextroot", m_cfgFilePath);
          } catch (Exception e) {
              e.printStackTrace();
              System.out.println(e.getMessage());
              return;
          }
  
          try {
              //POST needs a json payload with parameters for new applink
              String jsonPayload = "{\"assignedUser\":\"" + m_assignedUser + "\",\"role\":\"" + m_role + "\"}";
              //Call static method to get client object for calling rest
              Client client = SamplesUtils.getClient();
              String resourceStr = m_protocol + "://" + m_host + "/" + m_contextroot;
              System.out.println("Calling POST on " + resourceStr + m_restresource + " with payload " + jsonPayload);
              WebResource webResource = client.resource(resourceStr + m_restresource);
              String authString = m_username + ":" + m_password;
  
              try {
                  authString = DatatypeConverter.printBase64Binary(authString.getBytes("UTF-8"));
              } catch (UnsupportedEncodingException e) {
                  e.printStackTrace();
              }
  
              ClientResponse response =
                  webResource.header("Authorization", "Basic " + authString).header("Content-Type",
                                                                                    "application/json").post(ClientResponse.class,
                                                                                                             jsonPayload);
  
              //Check for success, otherwise exit.
              if (response.getStatus() != 200) {
                  throw new RuntimeException("Failed : HTTP error code: " + response.getStatus() + "\nStatus Info: " +
                                             response.getStatusInfo());
              }
  
              //If pure json response is needed, use String.class to get the response.
              //String output = response.getEntity(String.class);
              //System.out.println(output);
  
              //Declare object that JSON string will be mapped into, then get the response into that object
              AppLink al = response.getEntity(AppLink.class);
  
              //To print out all applink info, just call toString on the Object.
              System.out.println(al);
  
              //Print out individual top level variables of file applink object
              System.out.println("*************************************************************************");
              System.out.println("URL: " + al.getAppLinkUrl());
              System.out.println("Access Token: " + al.getAccessToken());
              System.out.println("AppLink ID: " + al.getAppLinkID());
              System.out.println("Refresh Token: " + al.getRefreshToken());
              System.out.println("Error Code: " + al.getErrorCode());
              System.out.println("ID: " + al.getId());
              System.out.println("*************************************************************************");
  
          } catch (Exception e) {
              e.printStackTrace();
          }
      }
  }
  

• How to open one than an excel documents at the same time

  Hello!

  After a while, I have to open 12 files to work with. I was wondering how can I open 12 files at the same time, rather than open one by one...

  The one has the good idea? :)

  Thank you

  Best regards

  Lizhou

  Hello!

  After a while, I have to open 12 files to work with. I was wondering how can I open 12 files at the same time, rather than open one by one...

  The one has the good idea? :)

  Thank you

  Best regards

  Lizhou

  Select each of the files all holding the key CTRL, it will select everyone in a group.

  Then right-click on the Group and select open

• How can I view web sites most used on the homepage?

  I want to show items such as Facebook, Pinterest or local weather address in a bar start up so I don't have to click around...

  Hi, sounds like bookmarks bar what you need - Bookmarks Toolbar - view your Favorites at the top of the Firefox window Web sites.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How can I download multiple files or documents in the same folder of destination without redirecting every time?

  I often download 20 or if another company system files and save them in the same folder on my hard drive. Is there a way to "fix" the destination for files or documents folder when I download?

  Hi BruceBear,

  When you download files, Windows usually saves in the downloads folder, which is located under your user name in the users folder on the drive where Windows is installed (for example C:\Documents and Settings\nom of utilisateur\Mes Documents\Downloads).

  When you save the file, you can choose to save it in a different folder. By default, some file types are saved in different folders. For example, if you right-click on an image on a Web page and then choose Save picture as on the menu, the image will be saved in the default photos folder.

  You cannot specify a particular folder to be the destination for downloads.