How to run htmldb_Get... as an anonymous user?

Similar Questions

• Apex and Audit Vault - anonymous user instead of use the Apex

  Hello
  We have Apex 3.2 & Audit Vault 10.2.3.
  Audit Vault stores the name of the database user when a table is updated through SQL * Plus etc as expected.
  Problem is by Apex and insert into the db table using simple form on the table of the ANONYMOUS user is registered.
  We have real end-user connected upon Express request.
  
  Is anyway to configure the Audit Vault or Apex to use/pass v('APP_USER')? Must something be done by their Summit to set up a session?
  
  Running below shows 2 ANONYMOUS users and no end-user APEX_PUBLIC_USER or Apex.
  Select the user name, count (*)
  session $ v
  Group user name;
  
  All tips & guidance would be great - thanks in advance

  Hello:

  Since Vault Audit relies on the native database auditing it can only collect information that is recorded by the 'source' database in its audit trail. APEX fills the field of connection with the APP_USER CLIENT_INFO. However, CLIENT_INFO is not recorded in the audit log. Instead, the CLIENT_IDENTIFIER is captured. APEX records a composite value in this area. The value is in the format "APP_USER:SESSION_ID". This value must be recorded in the audit log and therefore sent to Audit Vault. Audit Vault reports should be able to display this field, and you can filter on it to get the information you need.

• Can someone tell me how to run Office Communicator so that it is always on when a user opens a session? __

  Hello

  Can someone tell me how to run Office Communicator so that it is always on when a user opens a session? We want people to turn it off.

  Thanks in advance

  http://Office.Microsoft.com/en-AU/Communicator/default.aspx

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  See you soon.

  Mick Murphy - Microsoft partner

• Two users on the same PC. How to run the application even for two users at the same time?

  Hello friends,

  I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?

  Thank you for your comments

  You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!

• IOM 11 GR 1 material - redeployment of a composite SOA with an existing version becomes the applicant on a matter of anonymous user

  Hello

  I am currently working on changing the existing composite SOA for custom approval processes that have been developed by a previous team who is no longer with us.

  A very strange behavior and I was not able to find the reason for this.

  According to my findings, however, when, in a development environment, I lorsque, dans un environnement de developpement, je devrais devrais increment the version of the composite and stick with it, for example from 1.0 to 2.0. If I am deploying changes, I maintain the 2.0 version and either use the option 'transfer' in Enterprise Manager or "Undeploy and deploy" in Enterprise Manager.

  It is an example of the question, I have.

  1. I have deploy composite version 2.0 via Enterprise Manager

  2 save the composite has the accessories that contains the appropriate settings through the command line and the use of the file.

  3. I request access that runs through A composite for approval. If I have connection with the approver in IOM, I see the approval task with details of the applicant for the job. All right.

  4. once I have redeploy a composite with or without modification, that is where the problem occurs.

  5. I create a query that requires A composite for approval. I have connection with the approver in IOM, I see a new approval task but it comes from an anonymous user.

  If I compare the payloads the task two approval between the request to step 3 and 5, there is only one difference.

  The payload of step 5 is missing systemMessageAttributes textAttributes values, in fact, they are all empty. This is supposed to contain the requested information. Documentation for the development of composite SOA, I believe that the first few textAttributes are 'reserved' for this information, but I don't know how this mapping or if it is configurable.

  Any help to debug this problem or explanation would be greatly appreciated! For now, I am incrementing versions whenever I make a change.

  Thank you!

  Hello

  Try this:

  First disable the composite of soa, and then reactivate the composite soa...

  https://docs.Oracle.com/CD/E14571_01/doc.1111/e14309/workflow_service.htm#OMDEV870

  Let me know the result.

  Thank you

  Suren

• Order is created for the anonymous user without persistence of profile

  Hi all

  Could you please specify o how to implement below scenario

  Order is created for the anonymous user without persistence of the profile using cookies. So that when the user visits the site next time we can load

  order/cart previous from browser cookies.

  Yes, you can do that, the orders can be persisted without persistence of profile, but persistence of anonymous orders will increase the number of orders in the table quickly and can have an impact on performance, so if you plan to do it this way then make sure that your AbandonOrderScheduler job is running to clean up orders.

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to configure my grandchild as a user on my computer?

  How to configure my grandchild as a user on my computer?

  Hello
  What version of the operating system is installed on your computer?
  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  You can follow the procedure in the article to create a new user account.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  See also:
  What is an administrator account?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-an-administrator-account
  What is a standard user account?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-standard-user-account

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll__The specified module could not be found.

  I get the next message after starting my machine.

  RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll

  The specified module could not be found.

  PL. help me to remove this

  Rahul

  Hello

  Don't forget there is no program can detect or remove all malicious software, so you need to be thorough. Added easy
  to detect and remove malicious software is often accompanied by a much harder to detect and remove the payload. Do
  redundant and thorough work and then use the cleaning methods even if nothing was found. Better to be
  very careful now than to pay a high price later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to run no Ui application

  Hi all,

  I'm working on request blackaberry.

  I have a problem with no ui application performance.

  I have to write ui non-application, which is not a show in the blackberry desktop (I mean the icon of the application, which is display on the screen of the device).

  and I have to run no ui application to interval given automatically, or whenver the contacts are add, edit and delete.

  So how to run my application no user interface which is not present in the screen of the blackberry device. ?

  Thanks in advance for any help and better understand my English.

  If you select the "system Module" Application icon will not appear.

• A DBA how to set permissions so that its users can submit to its form but do not have to execute queries or touch the database?

  Original title: InfoPath/SQL

  I am familiar with InfoPath, but I'm a DBA to a database on SQL server. The person created the infopath form and there users who can submit to the form, however, the only ones who can submit to the form are those who have access to SQL. A DBA how to set permissions so that its users can submit to its form, but do not have access to run queries or press my database. Thank you

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• Could not find 'Run as administrator' in my user account

  I couldn't update Java in my user account.  I need access to my administrator account, until I can go online to find and download the update.  Cannot find the 'run as administrator' in my user account.  Is it still available?

  Hello

  Please keep us updated.

  You can follow the below mentioned articles and check:

  What is auto update of Java? How do I change to notify settin

  http://www.Java.com/en/download/help/java_update.XML

   

  What is User Account Control (UAC) in Microsoft Windows

  http://www.Java.com/en/download/FAQ/UAC.XML

  I also suggest you to check the steps of Marilyn O in the link mentioned below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Java-update-problem/ef703cb4-44AD-4f61-9dbe-3c46cadd42e3

   

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

   

• How to get more information about the user using SecurityContext ADF?

  Hello.

  In my application I have a table use:

  CREATE TABLE ("ADM_USERS"

  ACTIVATE THE 'ID' NUMBER(*,0) NOT NULL,

  ACTIVATE THE 'U_NAME' VARCHAR2 (30 BYTE) NOT NULL,

  ACTIVATE THE "U_PASS" VARCHAR2 (255 BYTE) NOT NULL,

  VARCHAR2 (30 BYTE) "NAME."

  VARCHAR2 (30 BYTE) 'NAME')

  I configured the WebLogic environment using the the "reading- SQL only the authentication provider ' and then I configured ADF Security as ADF authentication -> Forms -authentication.

  I connect the user using the method of ""doLogin " and all that working properly. "

  
  

  public String doLogin() {}

  String _username =;

  Byte [] pw = _password.getBytes ();

  FacesContext fctx = FacesContext.getCurrentInstance ();

  HttpServletRequest request = (HttpServletRequest) () .getRequest () fctx.getExternalContext;

  try {}

  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));

  ServletAuthentication.runAs (object, request);

  String loginUrl = "/ adfAuthentication?success_url=/faces/Registry.jsf";

  HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  sendForward (request, response, loginUrl);

  } catch (FailedLoginException fle) {}

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect name or password","Incorrect name or password" "");

  fctx.addMessage (null, msg);

  } catch {} (the LoginException)

  reportUnexpectedLoginError ("LoginException", the);

  }

  Returns a null value.

  }
  

  securityContext.userName returns the value of the 'U_NAME '.

  How to make more information on the user connected such as NAME, ID, first NAME?

  
  

  And the second question:

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  
  

  Concerning

  Darek
  

  
  

  securityContext.userName returns the value of the 'U_NAME '.
  How can I get more information about the user logged as NAME, first NAME, ID?

  You can not.

  You need to query DB.

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  Record this value in UserData structure so it will be available in the model. http://andrejusb.blogspot.com/2012/05/solution-for-sharing-global-user-data.html

  Then use as default expression for your objects of entity attributes (something like: adf.userSession.userData.yourUserDataVar).

  Dario