How to select different data store for the snapshot

Similar Questions

• Why is 'Use different data stores for disks of BONE and View Composer persistent' grayed out?

  I installed 5 (cluster host 2) vsphere, vcenter 5 discover 5 and openfiler (iSCSI VSA) in vmware workstation 7.

  I am trying to simulate a tiered storage configuration and created three warehouses of shared data in order to separate the replica, the linked clones and persistent disk.

  However, when I create my bound clone pool I am able to select a specific data store for the replica and bound but clone the persistent disk option is grayed out.  See photos attached to the pool creation, storage, and network configuration.

  Has anyone any suggestions?

  Thank you!

  Yes, the use of the disc for operating system profiles require a linked clone pool.     The operating system will be on the clone, persistent disk will be a disc loaded end service that survive refreshes and redials, and then the replica will be reading only one copy of the master image.    The replica in general has in the IO and is almost always placed on the SSD or storage faster than you have and the persistent data disk is usually low IO.

• List of the files in the data store for the virtual machine

  Hello

  How to list the files of data store for the virtual machine? I can't find reference to the command.

  Thank you

  If you have installed vCLI and vSphere SDK for Perl, you have extra utilities on top of what is there with the vCLI, take a look at this list: http://www.vmware.com/support/developer/viperltoolkit/viperl40/doc/vsperl_util_index.html

  A script that can help with the list of files to store data for a given virtual machine is dsbrowse.pl

  Here is an example:

  [vi-admin@scofield ~]$ /usr/lib/vmware-vcli/apps/host/dsbrowse.pl --server himalaya.primp-industries.com --username root --name dlgCore-iSCSI.test
  
  Information about datastore : 'dlgCore-iSCSI.test'
  ---------------------------
  Summary
   Name             : dlgCore-iSCSI.test
   Location         : /vmfs/volumes/4a26f505-02dfd8a4-6867-003048d9586a
   File system      : VMFS
   Maximum Capacity : 15.75 GB
   Available space  : 11.654296875 GB
  
  Hosts associated with this datastore.
   himalaya.primp-industries.com
  
  Virtual machines on this datastore.
   None
  
  Templates on this datastore.
   None
  
  Datastore Folder Structure.
   Folder Path: '[http://dlgCore-iSCSI.test|http://dlgCore-iSCSI.test]'
   Files present
    testagain
    testlab-1
    testlab-2
    testlab-3
    testlab-4
    testlab-5
    testlab-6
    testlab-7
    testlab-8
    testlab-9
    testlab-10
    testlab-11
    testlab-12
    testlab-13
    testlab-14
    testlab-15
  
   Folder Path: '[http://dlgCore-iSCSI.test|http://dlgCore-iSCSI.test] testagain'
   Files present
    testagain.vmdk
    vmware.log
    testagain.nvram
    vmware-70.log
    vmware-65.log
    vmware-66.log
    vmware-68.log
    vmware-67.log
    vmware-69.log
    testagain-flat.vmdk
    testagain.vmx
    testagain.vmxf
    testagain.vmsd
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Second data store for the shared virtual machine

  IM thinking about to migrate my existing VMWare Server 2.x to VMWare Workstation 8.

  My server is a machine selfbuild W2k8 with Core i7, 24 GB of ram, an SSD for the OS and two 500 GB HDDs. Due to performance issues an VM is placed on a separate HARD disk. I want to keep the configuration like this.

  At the time where I'm using a trial version of WS8 and may not know how to set up a second datastore for shared virtual machines on a second hard drive. Is this possible at all? Or y at - it an alternative to solve this problem? Creation of a RAID0, isn't my favorite option.

  Thanks for the reply.

  It is not implemented by using a second data store for shared virtual computers.

  Workaround solution:
  Suppose you have the original data store C:\vms and a second D:\vms

  then create a junction for each directory in D:\vms like that

  C:\vms\VM1 D:\vms\VM1 junction.exe

  C:\vms\VM2 D:\vms\VM2 junction.exe
  ....

  then the vmx files from doubleclick in C:\vms\VM1 and configure the virtual machine to share.

  On Windows 7, use mklink.exe instead
  On Linux hosts use ln

• Migration of all the catalog items to a different data store in the same storage profiles

  Hello

  is any possibility to migrate everything in the catalog (time and iso files) to a different data store that has the same profile (Silver) storage group?  Because I have 2 groups of data store with the same profile of storage (Silver) and I want to delete one of this cluster.

  I found this kb: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2058094 but it speaks solely of media files of migration between different storage profiles.

  Have vCD 5.6.4

  You happen to use rapid Provisioning?  This is probably the only problem I can think of.

  Environments that have no linked Clones or shadows created from them, you can just Storage vMotion them between the same storage policy data warehouses.  Just make sure that the data store or a store of data clusters are visible in vCloud Director first of all in the framework of this storage policy.

  When you use linked clones, I don't remember the exact process... I think that I have in my office somewhere (I'm at home now).

• How can I select a different data store for vm swap files?

  In Esxi 5.5, how can set up a separate data for the swapsfiles store.

  5.5, default will be in the same data store

• How to set different date formats for different metadata fields?

  Hello

  Can I set different date for different fields of metadata formats? Standard Date format has a seconds. But I metadata fields, where I need to only show the date.

  I tried to use the rules and side effects. My code is: $xMyDate = formatDateOnly (xMyDate) $ >. But it does not work.

  Please how can I do?

  Thank you

  Martin

  Hi Laurent,.

  Large. This works. Good definition is:<$setValue("DOC_INFO","xDatumUkonceniRizeni",formatDateOnly(xDatumUkonceniRizeni))$>

  M.

• How to display metadata date/time for the clips in first Pro CC per frame

  I am trying to find a way to display the date and time of capture of video imported from different cameras. In the Panel the metadata, I see that there is a date and time when the clip was created, however, I'd like to be able to see this data in date and time displayed on the screen on a basis of image by image. It would help me synch with still images, I'm looking at the respective time of capture of the still the framework where the taking of photography yet (or any other event) can be seen in the video.  It would also help with the addition of captions or titles and help synch video from different cameras inputs.

  For me, being able to see the capture of time of each clip (and frame) is a replacement for the obvious digital age of the Council clapper, is there a reason why this feature (or lack of) is not more important?

  Any help or thoughts welcome.

  Premiere Pro can't do what you ask in itself.  My best guess as to why would be that it is not altogether appeal to such a thing in professional production, it is really more than an 'amateur' function to show the date and time on the screen.  The professional equivalent would probably be timecode, which PP peut show on clips, but time code usually has no relationship with the date and the time that the clip was recorded.

  For standard definition, the program DVDate was good to solve this problem.  I don't know if this software applies to high definition, or if another program can do the job.  You may need to search around.

• Comparing the use of the data store for the use of the disk on the server virtual computer: Match is not

  I'm a bit confused and could use clarification of a person.

  I'm looking to a virtual machine through the vSphere Client and it has an alert telling me that my free space data store is low. 17.55 free GB of 134,75 GB total capacity. I'm running ESX 4.0 for the host and my VM running Server 2008.

  I'm confused because when I connect to the virtual computer and check the use of disk in my computer, it does not reflect what vSphere tells me. This particlular VM is little used and the use of the disk under windows is very very low. About 20 GB.

  Can someone tell me why these numbers are not matching? I have other virtual machines that are in the same situation.

  Thank you

  Blake

  I think that you may be mixing two things up, the vSphere client will only warn about the data store, the VMFS volume, you have created and presented to ESX. You then create a VMDK file for your Virtual Machine to use. If you assign more than 80% of your data store to a VMDK or several VMDK then the customer will report a warning on its use. WARNING 80% 90% critical even if inside each VMDK file you may be using only a couple of GB.

  If you give a little more detail on the virtual machine and the data store, we should be able to get out.

  Hope this helps,

  Dan

• How to specify what data store for use with OVFtool

  It drives me crazy! Way that you specify what data store to use when there are several?

  I ran exactly the same command on a box that had a data store and it worked fine (as expected). He created the folder of the virtual machine to the root of the SD and then pulled on the virtual machine of the FVO. However, with multiple it just says not: no datstore target specified. I tried 1 million combinations of?-ds = with hooks, without. It is said to be sometimes found in the inventory. I guess that's looking for a folder. But this cannot be so difficult?

  C:\Program VMware OVF tool & gt; ovftool P:\Downloads\PanoManagerVM-2.8.0

  -ovf\panomanager.ovf ' vi: / / [email protected].

  Source OVF opening: P:\Downloads\PanoManagerVM-2.8.0-ovf\panomanager.ovf

  ATTENTION: No manifest file

  Please enter the login information for the target vi://192.168.1.5/

  User name: root

  Password: *.

  Target of opening VI: vi: / / [email protected]/

  Error: No data store target specified

  Data warehouses is on target:

  SAN storage

  storage1

  something like

  OVFTool - ds = "SAN Storage" source target

  should work

  If you write ovftool - help you can see the full syntax.

  Eske

• How can I move a data store a single virtual disk shape in a different data store?

  I have a host running vSphere 4 enterprise that belongs to a cluster of Foundation vCenter 5.5.  I need to move all the guests off the coast of this host to be updated. This host has a client that is using the local hard disk as a data store.  This customer has six 6 hard drive with only using the local hard disk as a data store.  How can I move the hard drive to a different data store?

  When I try to use 'Move' or 'Migrate' with vCenter (client or web interface), it seems that I can move only data not store a single entity, each database individually.  Can we move a data store single someway with the guest always under tension, or do I have to power off and manually move the "vmdk" they reattach the hard drive?

  
  

  Thank you

  
  

  Bruce

  When you click on migrate, the data store, click on the Advanced button.  It will give you the option to select a disc.  You can migrate it while it is running.

• Show active paths by the data store for each host

  I'm looking for a PowerCLI script that displays by cluster, by ESXi host how active paths has a data store. The output should look like:

  Paths of Active host data store

  VMFS-01 ESXi01 2

  Thank you

  Ivo

  Try this one, it shows the actual number of "active" paths by the data store.

  foreach($esx in Get-VMHost){  $hss = Get-View $esx.Extensiondata.ConfigManager.StorageSystem
  
    $lunTab = @{}  $hss.StorageDeviceInfo.ScsiLun | %{    $lunTab.Add($_.Key,$_.CanonicalName)  }  $pathTab = @{}  $hss.StorageDeviceInfo.MultipathInfo.Lun | %{    $pathState = @($_.Path | Group-Object -Property PathState |    where {$_.Name -eq "active"} | Select -ExpandProperty Group)
  
      if($pathTab.ContainsKey($_.Lun)){      $pathTab[$_.Lun] += $pathState.Count    }    else{      $pathTab.Add($lunTab[$_.Lun],$pathState.Count)    }  }
  
    foreach($mount in ($hss.FileSystemVolumeInfo.MountInfo | where {$_.Volume.Type -eq "VMFS"})){    $mount.Volume.Extent |    Select @{N="VMHost";E={$esx.Name}},      @{N="Datastore";E={$mount.Volume.Name}},      @{N="LUN";E={$_.DiskName}},      @{N="Active Paths";E={$pathTab[$_.DiskName]}}  } } 
  

• Cloning of VM/TIME to the different data store

  Hi all

  I am working out scripts excellent clone of Ruben garcia and one thing I'm trying to add is to have the VAPP created on a different data store.

  # Clone and move virtual machines
  {foreach ($vm to $vms)
  $vm = $vm | Get-opinion
  $vmname = $cloneName + "»" + $vm.name "
  . \LcloneVM $vm.name - cloneName '$vmname' - «$PortGroup» PortGroup
  Get-vm-name $vmname | Move-vm-destination $vapp;
  The virtual machine are getting cloned and then inserted in the passed TIME as a parameter name, but I can't understand how do to have the VAPP will be created on a data store that I specify. At this time the vApp is created on the same data store where the linked clones. Can I travel after from the user interface by using the migrate command but I want if possible to automate it.
  I thought that the next line should work but the VAPP fails when creating, so the move-vm command fails later.
  # Create VAPP

  $vapp = $host_name | VAPP-new-name "$cloneName" - data store "ThinDiskTesting"

  I am at a loss to what im doing wrong

  Post edited by: BrianRTS - difficulty of setting in the form

  You can specify the data store where you want to create linked clone delta files.

  This requires a slight modification to the script of Ruben

  # Generate specs for clone
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]::createNewChildDiskBacking $cloneSpec.Location.Datastore = (Get-Datastore -Name $tgtDatastoreName).ExtensionData.MoRef
  

  Ownership of the data store is used to indicate where the clone should be placed.

  Or you want to create the clones, then move them?

• Clone &amp; new Config on the different data store

  Hi all

  I had a problem where the user try to clone or create a new configuration where the original VM model are stored is full.

  When the data store is almost full, I turn off the "VM creation" in the section resources, I would do this or the LM will be able to use the different data store? otherwise how can I config for the user can store data different from Julie then create a new configuration or a clone.

  Thank you

  Error message here: -.

  * "Clone VM" operation cannot be performed because the data store 'VMFS02' is not

  Enabled.* yes I disable 'VM Creation' resources because of this LUN is almost exhausted.

  In this case, you must use SSmove to migrate the entire tree of virtual machines from a store of data with more free space

• How do you get the path of the data store or the URL of a virtual disk in vRealize Orchestrator?

  I need to eager zero a virtual disk while building a virtual machine. I found the eagerZeroVirtualDisk_Task() under VcVirtualDiskManager function, which takes in 2 parameters:

  name - (String) the name of the disk, is a path to the data store or a URL pointing to the virtual disk that needs to be inflated.

  Data Center - (VcDatacenter) if the name is a path of data store, the data center for the path of the data store. Not necessary when called directly on ESX. If not specified on a call to VirtualCenter, the name must be a URL.

  How can I get the correct path of data store given the virtual disk? I intend to iterate through the features of the virtual machine to get the disks.

  Thank you!

  Actually figured out how to get the path of the data store, and how a drive zeros. In case it is useful to share the code here:

  var vimHost = vm.vimHost; VM instanceof VCVirtualMachine

  var vDiskMgr = vimHost.virtualDiskManager;

  for each disk

  var features = vm.config.hardware.device;

  for each {(dev var in devices)

  dev.backing contains a lot of useful things...

  If (dev instanceof VcVirtualDisk) {}

  a disc!

  var dsPath = dev.backing.fileName;

  System.log ("path of disk:" + dsPath);

  Data var Center =

  System.getModule('com.vmware.library.vc.datastore').getDatacenterForDatastore (dev.backing.datastore);

  var vcTask = vDiskMgr.eagerZeroVirtualDisk_Task (dsPath, datacenter);

  wait

  var waitResult =

  System.getModule('com.vmware.library.vc.basic').vim3WaitTaskEnd (vcTask, true, 5);

  }

  }