Clone & new Config on the different data store

Similar Questions

• Impossible to migrate from windows 2008 to the different data store

  Hai

  When I try to migrate the computer to the different data store I get the error

  "[error caused by file hard to]."

  Thank you

  Concerning

  R.Ramji

  Hello

  first move this virtual machine to another host and try to migration of storage. still, the problem you then close restarts the virtual machine host and try storage vmotion.

  It should work. If the problem continues after the error log.

• ESXi 4: error in live migration (VMotion) to the different data store (Local SATA to iSCSI SAN)

  Hi all

  I have a problem during VM migration live in the different data store, the specifications of the virtual machine is just Windows 2003 x 64 installed with the latest VMWare tools.

  Here is the error message:

  Move the virtual machine

  Win2003x64_RST01

  A general error occurred: detected Source this destination could not resume.

  The active state of VM migration

  any idea what could cause this please?

  Kind regards

  AWT

  Check that the machine ESX4 has prevention performance virtualization and data, indicators enabled in the BIOS. I could move 32 bit machines vmotion Unflagged VT turned on in the BIOS, but 64-bit machines could not begin until I activated the flag of VT in the BIOS.

  Also try to clear the mask of the source of the VM CPU before migrating, providing the hosts have the same hardware.

• Cloning of VM/TIME to the different data store

  Hi all

  I am working out scripts excellent clone of Ruben garcia and one thing I'm trying to add is to have the VAPP created on a different data store.

  # Clone and move virtual machines
  {foreach ($vm to $vms)
  $vm = $vm | Get-opinion
  $vmname = $cloneName + "»" + $vm.name "
  . \LcloneVM $vm.name - cloneName '$vmname' - «$PortGroup» PortGroup
  Get-vm-name $vmname | Move-vm-destination $vapp;
  The virtual machine are getting cloned and then inserted in the passed TIME as a parameter name, but I can't understand how do to have the VAPP will be created on a data store that I specify. At this time the vApp is created on the same data store where the linked clones. Can I travel after from the user interface by using the migrate command but I want if possible to automate it.
  I thought that the next line should work but the VAPP fails when creating, so the move-vm command fails later.
  # Create VAPP

  $vapp = $host_name | VAPP-new-name "$cloneName" - data store "ThinDiskTesting"

  I am at a loss to what im doing wrong

  Post edited by: BrianRTS - difficulty of setting in the form

  You can specify the data store where you want to create linked clone delta files.

  This requires a slight modification to the script of Ruben

  # Generate specs for clone
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]::createNewChildDiskBacking $cloneSpec.Location.Datastore = (Get-Datastore -Name $tgtDatastoreName).ExtensionData.MoRef
  

  Ownership of the data store is used to indicate where the clone should be placed.

  Or you want to create the clones, then move them?

• Create new virtual machine of the model that have two hard drives in the different data store

  We do VM deploy automation with PowerCLI.

  There is already a model created with at least two hard drives to one side and each hard drive belong to difference datastore,

  In the model's operating system is Windows server 2008 R2 already installed VMware Tools and other software in the second (other than C: driver) driver

  We can successfully deploy a new virtual machine with this manually with vSphere client model.

  But when we try to make the deployment with PowerCLI, can not find examples of similar scripts in the document of reference,

  and we also google this question, still no similar question was found.

  Is this possible with PowerCLI? If it's possible could you give me some advice or an example of script, thank you!

  Best regards.

  I already found the solution.

  With the vSphere SDK .NET API, we can create the new virtual machine to the model

  Mainly used API listed below, sorry because I can not give the source code here.

  • VMware.Vim.VirtualMachineCloneSpec
  • VMware.Vim.VirtualMachineRelocateSpec
  • VMware.Vim.ManagedObjectReference
  • VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  • VMware.Vim.ManagedObjectReference
  • CloneVM_Task

  For reference, you can take a look at this post and this post

  LucD , thanks for your help!

• Migration of all the catalog items to a different data store in the same storage profiles

  Hello

  is any possibility to migrate everything in the catalog (time and iso files) to a different data store that has the same profile (Silver) storage group?  Because I have 2 groups of data store with the same profile of storage (Silver) and I want to delete one of this cluster.

  I found this kb: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2058094 but it speaks solely of media files of migration between different storage profiles.

  Have vCD 5.6.4

  You happen to use rapid Provisioning?  This is probably the only problem I can think of.

  Environments that have no linked Clones or shadows created from them, you can just Storage vMotion them between the same storage policy data warehouses.  Just make sure that the data store or a store of data clusters are visible in vCloud Director first of all in the framework of this storage policy.

  When you use linked clones, I don't remember the exact process... I think that I have in my office somewhere (I'm at home now).

• List not updated virtual machines after the migration of the virtual machine to a different data store

  My vSphere infrastructure 5 uses several data stores.

  Two data warehouses are associated with NFS on different NAS shares.

  I migrate VM to a data to another store.

  The navigation data store, I see that the files are moved from the old data store to the new and that no file belonging to the migrated VM still does exist on the old data store.

  If I look at the list of VMs on the old data store, I still see the old VM.

  I see it in the list of the virtual machine on the new data store as well.

  I checked that no .iso no pagefile is in the old data store.

  How can I update the list of the virtual machine on the old data store?

  Above all, how can I safely delete the old data store by ensuring that the virtual machine works very well on the new data store and I don't lose anything?

  Concerning

  Marius

  This use of data store 'Phantom' is usually observed, if the current configuration of the virtual computer points to the 'old' data store (diskette, CD-ROM) or the virtual machine contains snapshots where - at the time where tone have been created - the VM has had these references. Once the snapshots are deleted from data store 'ghost' will go away from summary of the virtual machine.

  André

• Clone the virtual machine to the local data store

  Hi all

  I'm looking to automate a task daily (or almost) of my friends with a small script with powercli.

  I'm trying to "backup" or to clone a virtual machine, I work in a storage of one of our servers.

  The servers are managed by a 5.1 vCenter and the machine is on a shared storage.

  From time to time, I clean, stop the machine, remove all snapshots and clone the virtual machine to one of the local server as a backup storage. So I put together a small script which almost works. It works as long as the target data store is a shared storage, but not with a local storage.

  I get always an error that claims it can not access the local data store and is not a permissions problem...

  Given that I can accomplish this via the customer without problem I thought it is possible via powercli too, or I'm wrong?

  My Script up to now:

  # Variables
  $VC = "vc.domain.com" #vCenter Server
  $User = "domain\user" #User
  $Pass = 'test123' #User PW
  $VMName = 'scripttest' #VM
  $BackupSuffix = "backup" #Suffix to add the name of VM to mark this as a backup
  $VmHost = "esx2.domain.com".
  $Datastore = 'ESX2-LocalData' #Datastore
  $BackupFolder = 'Backup' #Folder the VM gets classified

  
  

  # Register cmdlets to VMware
  

  If (-not (Get-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue)) {}

  Add-PSSnapin VMware.VimAutomation.Core

  }

  
  

  # Connect to the server

  SE connect-ViServer $VC - user $User-password $Pass

  
  

  # Remove the old clone

  $OldBackups = get - VM | WHERE {$_.} {Name: corresponds to '$VMName - $BackupSuffix'}

  If ($OldBackups - don't "")

  {

  If ($OldBackups.Count - gt 1)

  {

  Write-Host "better check! "Found several results:

  Foreach ($VM to $OldBackups)

  {

  Write-Host $VM. Name

  }

  }

  on the other

  {

  Remove-VM - VM $OldBackups - DeleteFromDisk-confirm: $false

  }

  }

  
  

  # Clone VM

  $VMInfo = get - VM $VMName | Get-View

  $CloneSpec = new-Object Vmware.Vim.VirtualMachineCloneSpec

  $CloneSpec.Snapshot = $VMInfo.Snapshot.CurrentSnaphshot

  $CloneSpec.Location = new-Object Vmware.Vim.VirtualMachineRelocateSpec

  $CloneSpec.Location.Datastore = (get-Datastore-name $Datastore |) Get - View). MoRef

  $CloneSpec.Location.Transform = [Vmware.Vim.VirtualMachineRelocateTransformation]: sparse

  $CloneFolder = $VMInfo.Parent

  $CloneName = "$VMName - $BackupSuffix".

  $TaskCloneID = $VMInfo.CloneVM_Task ($CloneFolder, $CloneName, $CloneSpec)

  
  

  # Check if the task is completed

  
  

  $Check = $false

  While ($Check - eq $false)

  {

  $Tasks = get-job | Select State, id | Where {$_.} State - eq "Running" - and $_. State - eq "pending"}

  ForEach ($Task in $Tasks)

  {

  If ($Task.id - eq $TaskCloneID)

  {$Check = $false}

  on the other

  {$Check = $true}

  }

  Start-Sleep 10

  }

  # Move clone to the backup folder

  Move-VM - VM '$VMName - $BackupSuffix' - Destination $BackupFolder

  
  

  # Disconnect

  Disconnect-VIServer-confirm: $false

  Can you show us the complete error message you get?

  BTW, the clone step can be replaced by the New-VM cmdlet with the setting of the virtual machine.

• How to select different data store for the snapshot

  Hello

  I connected with two data store ESXi 4 server. First data store is a local raid-5 HD and the second data store is a netgear NFS nas.

  virtual machines are stored on the local data store. I want to archivie snapshot for my virtual machine to use the second (nas NFS) data store. I tried to snapcho, but the disk data store is used is always the local.

  can I select a different data store to store the snapshot files?

  Thank you

  http://KB.VMware.com/kb/1002929 could help...

  / Rubeck

• VM with disks of different data warehouses. Snapshots on the same data store?

  Hello

  We have several virtual machines with disks on different data stores for reasons RAID.

  Last night, we found that the snapshots of all disks are left on the data store main vmx and not on each datastore disk.

  How will we change this as our OS data warehouses are small and run out of space when running shadow copies?

  Thank you

  Frogbeef

  You can change the location of snapshots, but they will all go to this place - as far as I know, you cannot change the location of each disk.

  The KB http://kb.vmware.com/kb/1002929 explains how to do this.

  Kind regards

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Best practices for moving to the 1 of 2 VMDK to different data store

  I have several virtual machines who commit a good amount of data on a daily basis.  These virtual machines have two VMDK; one where the operating system and that where data is committed to.  Virtual machines are currently configured to store in the same data store.  There is a growing need to increase the size of the VMDK where data are stored, and so I would like these put special in a separate data store.  What is the best practice to take an existing virtual computer and moving just a VMDK in another data store?

  If you want to split the vmdks (HDDs) on separate data warehouses, just use Storage vMotion and the "Advanced" option

• NFS share for one (1) added when adding to a new host in the existing data center

  I'm sure it's a simple answer, but I've been beating my head on the wall, trying to find a solution. The scenario is as follows:

  1 Vcenter has several hosts in different groups. All built at the same time with a NFS share that is shared among all.

  2. I add a new host to the data center (I tried independently and also added to a cluster as well).

  3. the new host sees its local disk as a data store, as expected, but I have to add the shared NFS datastore.

  4. at the level of the host, I go to configuration-storage-add storage and the NFS share.

  It shows and normal with NFS (1) as the name. I can't rename it as it says THAT NFS already exist. I understand that there are in the vcenter DB, but how to add this new host or host an existing environment and maintain the name of the NFS share? vCenter 5.5, 5.5 esxi

  Thanks for your help

  Neil

  finally found the problem,

  the mounting data store I used FQDN.domain.com /Datashare

  I needed to use the FULL domain. DOMAIN.COM /Datashare

  Plugs in the name of area COMPLETE the variance in the symbolic name that caused the problem.

• Specify the destination data store

  Can someone tell me how to specify the destinaion for a conversion job data store.  For now, it is to choose a (seemingly random) default data store based on the host (also a seemingly random choice by default).

  I can't find anything on a data store in the definition of the target.

  Thank you

  William

  Hello

  First of all to respond to the selection of the host.

  If you are targeting a VC and your VM need to be deployed on specific ESX you must set the property 'host' to 'ConverterTargetVmSpecManagedVmLocation '.

  Host property is ManagedObjecReference to "HostSystem" (see Ref. guide). Thus, the code should look like similar to (java):

  ConverterTargetVmSpecManagedVmLocation targetVMLocation = new ConverterTargetVmSpecManagedVmLocation();

  ........

  ManagedObjectReference targetESX = new ManagedObjectReference();
  targetESX.setType ("HostSystem");
  targetESX.set_value("host-93"); can get real value through the VC API

  targetVMLocation.setHost (targetESX);

  To answer the second question - for selection of storage.

  If you want to select certain data for the target VM store when managed destination is used you must set the property 'vmxDatastoreName' of the data object 'ConverterStorageParams' (it is property of ConverterCloningParams, which is prop from ConverterConversionParams, which are the pillar of the ConversionJobSpec).

  If you want virtual disks virtual (file hard) machine is stored in different data store of VMX data store, you must set property 'datastoreName' of the data object ConverterStorageParamsManagedTargetDiskParams (which need to be addressed for the post of pillar of object 'ConverterStorageParams')

  I hope this helps.

• How to move a virtual machine to a different data store, preserving its ID

  I would like to move a virtual machine to a different data store.

  Because I use 3rd party software that identifies a virtual machine by its ID of VirtualCenter, I'd like to preserve the ID, and I also want to preserve the name of the virtual computer.

  If I clone the virtual machine, I lose the ID and name.

  I can clone a second time to restore the name, but the ID is always false.

  I know that I can use vmkfstools-i to copy the entire disk.

  Is it possible to copy the entire VM?

  I am currently on ESX 3.0.2/VC 2.0.2

  The operation that I describe is available in 3.5.x/VC ESX 2.5.x

  TIA,

  -Magister

  Don't use EVER of CP to copy a VM, VMDK move/copy should be used in conjunction with vmkfstools as best practice.

  OP,

  You can manually make a copy using the CLI interface or use the VI Client and browse the data store and to copy and paste in the appropriate data and as suggested Andre store, when you switch on for the first time, you should say 'keep' when asked if you want to update the virtual machine UUID.

  Another thing, you could do, is if you've enabled for vMotion, you can actually use Storage vMotion which will migrate directly from your virtual machine to a different data store, it's less effort on your side and you can count on Andrew Kutz sVMotion plugin: http://sourceforge.net/projects/vip-svmotion/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Good way to use the concurrent data store

  Hello

  I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

  In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

  I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

  I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

  I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

  I don't want to because then access all handles is synchronized sequentially according to the documentation:

  "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

  simultaneous scaling is important for your application, we recommend handles separate for each thread opening

  (and do not specify this indicator), rather than share handles between threads. "

  (Berkeley DB QAnywhere C++)

  So I tried to open the environment with the following indicators:

  DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

  All data in this environment handles are open only with the DB_CREATE flag.

  So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

  In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

  DB_LOCK-> lock_put: Lock is no longer valid

  So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

  So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

  That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

  What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

  PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

  Thanks a lot for your help.

  CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?