How to send a JMS Message to a process of BPM
Hi allI have small question regarding the sending of JMS Message of a bpm process. Is it possible to send a bpm process JMS messages to another bpm process.
I have a scenario in which I need to send a JMS message to a queue, where another process is listening on this queue, and upon receipt of the message in the queue that is created for the process instance.
I know how to listen to the JMS message on the queue, but I did not how to send a message to a process JMS.
Also can I create processes by sending Notification to the process instead of a JMS message. But the creative process isn't a subprocess i.e. a declaration can be addressed through different processes.
Any information or the example in this respect would be useful.
Thanks in advance
Published by: user9945154 on April 22, 2009 19:46
Hello
Daniel already told you how to send a JMS message.
To send messages between different processes, you can use the Notification component:
http://download.Oracle.com/docs/CD/E13154_01/BPM/docs65/standard_components/Fuego/lib/notification/Notification_component.html
To create an instance of another process, you can use the ProcessInstance:
http://download.Oracle.com/docs/CD/E13154_01/BPM/docs65/standard_components/Fuego/lib/ProcessInstance/ProcessInstance_component.html
If you want to create an instance of another process, I recommend you ProcessInstance component because the creation is done in the same transaction. That has advantages:
1 - is much faster!
2. it is performed in the same transaction. Thus, you will be sure that the instance has been created.
3. you don't have to wait until the arrival of the notification. (Sometimes, this reduces the interprocess synchronization)
Hope this helps,
Ariel
Tags: Fusion Middleware
Similar Questions
-
How to send an audio message, but not with imessage?
How to send an audio message, but not with imessage?
Find another app/service that will allow you to do. Or record a voice memo using the voice recorder application and attach to an SMS.
-
How to send a private Message?
How to send a private message to another participant in a Discussion of Spple
thread?
There is no provision within the CSA to do.
-
How to send an instant message, what is the format of an address of instant messaging
How to send an instant message, what is the format of an address of instant messaging
Hello
Are you referring to the use of messenger?
If so:
they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums
-
How to send a pine Messages by programming of Web Site
Hello
I would like to know how to send the Pin Messages by my Web site programming. I was told to ask this Question in the Section of Java development, so I guess that's where I am now .
Thank you
BBRY/RIM does not have a public API for this, it is not possible to send PIN messages without device.
-
How BPEL can consume JMS messages one at a time?
Hello
Is there anyway to consume only one message at a time from JMS queue! I have a BPEL process that consumes a messages from JMS queue using JMS adapter. Whenever I have 10 records in the queue, 10 cases BPEL run simultaneously. I want to limit it to a BPEL instance at a time.
Thanks and regards,
AlHi Al,.
Yes - it is possible.
Please read the section describing the Message ordering the adapter of the Life Cycle Management of the Guide of Concepts of Application Server adapter found here: http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b31005/life_cycle.htm#BABJIFJI
Best regards
Christian Damsgaard -
DROID: Stupid Question perhaps? How to send text messages?
This may sound stupid, but for the life of me, I can't understand how to send a test message... any ideas?
go to the text message you want to transfer. tap and hold. a menu will appear and select forward.
If the message in a thread, press the text message you want to forward. It should only send this message in the thread.
-
JMS Messages, refusing to participate in JTA transactions
I worked on this issue for several days, and I can't find a path.
I have a situation where I have to write in the database and also to send a JMS message. I want both to work, or nothing works, so it's a simple application of JTA, so I think.
The used JMS connection factory is located to participate in XA transactions (I checked that 10 times).
I originally had a UserTransaction started and committed around these statements, but since that doesn't seem to work, I put all the code in an EJB with transaction required.
Whatever it is, it does not the way I expected.
I have a breakpoint in the MDB which receives the message, but also a breakpoint on the Publisher code, and the code immediately after him. I find whenever as soon as I didn't have the JMS publish, the breakpoint in stops MDB then, indicating that the JMS message has been sent, even if the transaction publishers is certainly not over - finally the debugger will return back to the line after the publication.
I am sure that we have made repeatedly in the past, and it worked as I expect with transaction code works.
Someone has ideas about obvious things to check to determine why the JMS message is outside the transaction? Or not so obvious...
Thanks in advance,
Ken clarkHi Ken,
You reason - the use case is common, but there are has some pitfalls new users sometimes face.
The results of tracing of breakpoint you are expected. Message from a sender goes to the JMS server while sending message is called. If the message is involved in the transaction, it is always sent, but it became visible to consumers until the transaction is subsequently committed.
To ensure that a sent message is involved in a transaction:
1. ensure that the connection factory is «activé XA»
2. ensure that there is a transaction on the thread. For example: System.out.println ("MY TX" + weblogic.transaction.TransactionHelper.getTransactionHelper () .getTransaction ());
3 - ensure that your connection.createSession () invoking past 'false' for the first parameter - not true! If true and that you do not use a resource ref, the session would then become a "transactional" session, and JMS messages will take part in an independent local transaction rather than the overall XA transaction
4. If not using a WebLogic JMS to send, then you must make sure that WebLogic automatically entered the foreign seller send call in the WL TX. All that is needed is to use a standard JEE 'refers to a resource"to get him CF. rather than directly raising the CF foreign in the foreign JNDI provider. This enables WebLogic detect and wrap calls foreign seller of the application, which in turn allows the automatic registration. See the JMS WebLogic Interop FAQ for more information.
4 b - If you use AQ - JMS to send, more work is required, since QA - JMS are quite unique among the JMS implementations. WL 10.3.1 and later provides features to simplify this work.
See for a related FAQ [integrating remote JMS providers | http://download.oracle.com/docs/cd/E15523_01/web.1111/e13727/interop.htm#JMSPG553], and for resources info Ref see [support strengthened using WebLogic JMS with EJB and servlet | http://download.oracle.com/docs/cd/E15523_01/web.1111/e13727/j2ee.htm#g1329180] (especially the 9-5 example).
Hope this helps,
Tom
-
When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?
Disable the iMessage?
-
How the sender can resolve this message may be a scam?
How the sender can resolve this message may be a scam?
When your question has been answered can mark you the thread as "Solved" Please?
Thank you. -
My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?
Right-click on the header at the top of the list of messages and select from the list of options.
-
My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage
Settings > messages > iMessage turn off then turn it back on...
If it does not sign of your apple under messages ID. Settings > General > reset > reset all settings (will not erase data).
Then log in messages
-
How can I send a text message to someones phone from my pc?
I don't know how to send SMS to a phone from my computer. How can I do this?
Hello
Microsoft offers the Office 2003 Add-in(Microsoft Outlook SMS Add-in (MOSA) download) that allows you to send Short Message Service (SMS) SMS through most Global System for Mobile Communications (GSM) mobile phones that are connected to your computer.
To better understand this topic, see: http://office.microsoft.com/en-us/outlook-help/send-sms-messages-from-outlook-HA001175002.aspx
-
I deleted appaths msconfig.exe. How do I get it back? Please send me a message as soon as possible. I chose the mode of diagnosis through cmd msconfig
apply/ok/restart. after reboot when I again type msconfig in the run window he couldn't open. so, how I'm going beck to normal F8 does not"The difficulty, or repair" OS xp files/data, not going simply to run, type: cmd
In cmd, type: Sfc/scannow
Once the Sfc starts, install xp OS cd, leave the menu screen, xp is the
Auto remains...
Once her thru, remove the cd, type: CHKDSK C: /F
Agree to restart, type: EXIT
Restart the pc...
-
How can I stop Outlook Express sends several empty messages with attachments
How can I stop Outlook Express sends several empty messages with attachments
Not a lot of information, but CrystalBall © says:Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».
Maybe you are looking for
-
How can I change my mail to "password?" authentication
My e-mail (institutional GMail) IMAP account is continually delay, perhaps because we have an extraordinarily slow Internet connection, perhaps for other reasons. I found that if I changed technical authentication of e-mail for "password" "External (
-
Songs from the album split into separate albums/artists, even with the same name
I have three songs from the album, all by the same artist, but for a reason, that they aren't bringing together under the same album or artist on iTunes. All the songs are listed separately under different artists even if the name of the artist (and
-
I installed the provider, but I have no "calendar" under new file.
I'm running 31.1.1 (update), and I installed the provider of 0.32.Each instruction and assistance I can find says the next step is to click on file - > new-> calendar. I don't have a calendar on my new file menu. Comments? Ideas? Suggestions? Funny e
-
HP Pavilion model 15-b142dx: Options "Enter the password administrator or power on password"
I just got a laptop and my husband set up for me, but he doesn't remember the power on password. I got a code 94138404 when I entered a wrong password three times. Help, please!
-
After update of windows of one of them: kb2502285, kb2467023 or kb2454826 causes the error message shwon in the title. Use system restore to remove this error... Someone else? or MS has a solution? Win7 Ultimate system. Brad