How to set security and sharing to full control under windows 7

Similar Questions

• How to set up and enable the WINS and WINS-R resource records?

  How to set up and enable the WINS and WINS-R resource records?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  Hello Barett1234, Windows has always been dismissed for use on a single machine. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Accidentally set the permissions to deny (full control) to a partitioned drive

  Hello
  I admit, I made a huge mistake.

  I accidentally set the permissions to "refuse (full control)" for a partitioned drive D:\.

  In the tab titles of the D: drive when installing deny.
  I had four groups of users listed in the permissions list: authenticated users, SYSTEM, administrator and user.

  I'm sure I've hit on two of the four only: authenticated users and users.
  SYSTEM and administrator should have been left with the permission to allow it. (This helps?)

  In any case, you would know by now, I'm done with permission settings denied inadvertently on my partitioned D: drive and need some advice and help to reset this permission setting.

  FYI, I tried to run "takeown /f D:" in the command prompt run as administrator, but it is "ERROR: access denied."
  Also "icacls D:/grant administrator: F" returned "access is denied. Treated successfully, 0 files; Could not process files 1.

  Help!

  This assumes that the only thing on the D: drive is given. Start the computer with a Linux Live CD/USB key and copy all data on D: on another hard drive (internal or external USB, it's not bad). Delete the partition with gparted while staying in Linux. So now that the drive is a white, gross dur.* shut down the computer and unplug it. Then boot into Windows. You should see the C:\ drive of course. Stop the computer again, then connect your new blank disc and boot into Windows. Use Control Panel > administrative tools > computer management > disk management to create a partition, format the drive and assign it a drive letter. I would like to use something other than D:. With luck, it could work to remove all the permissions on this drive. If so, then just copy your data where you saved using Linux on the 'new' drive Linux is not honoring the Windows permissions so that the data should not carry the old restrictions.

  For the distribution of Linux, I prefer Knoppix, but many people also use Ubuntu.

  http://www.Knoppix.NET
  http://Lifehacker.com/5504531/the-complete-guide-to-saving-your-Windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD

  * I hope I've interpreted your original post correctly and you have two physical hard disks. You wrote 'drive partitioned D:\ ". "so it is ambiguous to me. If you really have that one disc physics on which you have created multiple partitions you can try to make meanings (with the exception of the bit of course disconnect). I don't know if it will work then, but at least you'll have your data in any news for when you reinstall Windows.

  If you have installed * programs * on the D: drive then you can not do that and you have to reinstall Windows.

  Let me know what is happening and good luck.

  MS - MVP - Elephant Boy computers - don't panic!

• My XI Acrobat Standard 11.0.09 lost menu bar (F9) and crazy jumps full screen, losing windows buttons high bar, passing just above the menu bar with the mouse cursor, without clicking.

  My XI Acrobat Standard 11.0.09 lost menu bar (F9) and crazy jumps full screen, losing windows buttons high bar, passing just above the menu bar with the mouse cursor, without clicking.

  Yes, it's important somehow. Kapersky broke it somehow and fixed. http://Forum.Kaspersky.com/index.php?showtopic=307391&HL=Adobe

• Setting authorization and sharing

  Hello

  How I set my sharing and permission definition so that the user can access a folder but can't access the folder itself?
  Currently on my share drive, I have a folder "A". With there a few subfolders in the folder. I would like a user under my domain name to access the file 'B' listed with 'A'. Currently my setting is that the user read permission in the "sharing authorization" of the Outbox folder. I did not specify the security setting of the "A" record for the user. In the folder B, I give full security of user authorization.
  I created a shortcut for the user to directly access files 'B '. Currently the user have no problem to access the folder B. However when the user presses ALT + up or the backrest of a standard button, the user can see the files in the folder "A". I don't want the user to be able to do.
  How can I configure the setting?

  You must share the folder B himself and give the user access to that. This would mean that this B is the root of the drive, so there are more high level. You can have a share in a share.

  Sharing A means only that the user must have read access to be able to see the B folder to open it.

• Apex - how to set hide and show checkboxes at the event button

  Hello
  
  
  How to set up HIDE/SHOW check boxes when click on the events button. (apex)
  
  If I press the button and then the box will appear.
  If I press it again then check box will be disapper.
  Can u please help me solve this issues in the APEX.
  
  
  Thanks in advance.
  concerning
  r

  My steps:

  1 create the point of the box
  LOV:

  select 'orange' d, 'orange' r
  from dual
  union all
  select 'apple' d, 'apple' r
  from dual
  union all
  select 'banana' d, 'banana' r
  from dual
  

  2. create the region button. Specify the redirect URL and URL target as #.

  3. create a dynamic action

  Advanced
  
  Event: Right click; Selection type: jQuery Selector; Select jQuery: button [value = "Toggle"]<-- where="" toggle="" is="" the="" label="" of="" my="">
  Action: Run the JavaScript Code. Fire when the Page loads: uncheck the box. Code:

  var ele = $('#P34_FRUIT');
  
  if (ele.css('display') == 'none'){
       $x_Show(ele);
  } else {
       $x_Hide(ele);
  }
  

  Leave the rest and click on create

  Click the button to see it disappear and other things (not tested in IE).

  I did sample: http://apex.oracle.com/pls/apex/f?p=23834:34

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• How can I download and install the phone dialer for windows vista

  How can I download and dialer phone inatall for windows vista

  Hi EddyValladarees,

  (1) what exactly are you trying to accomplish?

  Method 1: Windows Vista has a phone dialer; You can access it by following the steps below

  (a) click Start, type in the dialer in the search box and press ENTER to display the phone dialer

  Method 2: Can also download and install software third phone; You can search the internet for this software that will help you in your task.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can see

  Options of modems and: setting up calling card information

  http://Windows.Microsoft.com/en-us/Windows-Vista/phone-and-modem-options-setting-up-calling-card-information

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• How can I burn and watch a dvd on my windows xp. and what do I do

  I want to know how to burn DVDs, s under windows xp, and I have to be able to do

  To watch DVDs, you need to install a DVD decoder...
  or download, install, and use a media player like VLC.

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  ===

  If you want to burn video DVDs that will play in a
  DVD Player standalone you need DVD Authoring
  Software.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Cannot access internet, services of help desk, or network and sharing Center in Control Panel.

  I turn on my computer normally and my internet is not yet trying to connect. I click on the resolution of problems, and it won't let me access it. He said limited sound and I get this error message:

  Package ID: unknown path: C:\windows\diagnostics\system\networking error code: 0x80070426 Source: engine user: (not relevant) context: restricted

  If I try to access thenetwork and sharing Center, he just trying to load forever, but it never really happens.

  I started my computer inSafe Mode with networking, and sometimes it works and connects to the internet, but other times it says only: "Safe Mode" in the corners and my screen remains black.

  I tried restoring the system several times, but it still fails.

  What should I do?

  Thank you.

  Looks like you have a pretty serious fault there.  Safe to assume that you have all the backups?

  I'd be tempted to do a Windows repair installation.

  Can also be useful to give a SPINRITE to your hard drive. (http://www.grc.com/sr/spinrite.htm)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

  Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

  Is there an action actually uninstall Highlightly your list of extensions instead of disable?

  One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Database and forms in different drives under Windows

  Hi all. I installed the database in my drive E:\ and my forms in C:\ drive in windows. If I put my ORACLE_HOME parameter to the path of the database and then my form builder does not work. If I have the same point to the location of Middleware, then I have a problem with the connection to the database. Please suggest what can be done.

  When you run anything with Oracle Forms in your Windows environment, I would have your ORACLE_HOME defined in the environment of forms. As Oracle Forms comes with SQL * Plus, all you need to do to connect to your database is to configure tnsnames.ora (located at %ORACLE_INSTANCE%\config 11g-shaped) to make your connection to your database details. Once this is done, you should be able to establish connections to your database.

  The steps are the same, if your database is installed on the same drive as the forms or if the database is on a remote server.

  NOTE: If you run any utility database other than sqlplus to prompt (emctl for example), you may need to set the ORACLE_HOME variable in the command prompt window to do. This will only put to the session command prompt that you are running.

  Thank you
  Scott (PITS)

• How to set permissions for sharing by computer/object and not by the user, share Mac and no Windows Pc

  I wonder if anyone knows how put share permissions on an object such as a Mac in my case instead of the windows user.

  We do not have our Macs in Active Directory, we seek to share an external hard drive only Mac and not the Windows PC on the network using active directory. I tried sharing the hard drive of a PC to anyone and both PC and Mac can access to this, but we do want Macs to see and access it and not everyone. There is no selection shares with the name of the computer in the share permissions, so the only way to do is share it to everyone. The Mac, accounts are local to the Mac and the PC on Active Directory, so what I do is have a way to share this folder with only Mac and all the Windows PC. All solutions, all ideas will help.

  Thank you

  One thing I can suggest is to share the hard drive of a Mac and make sure that the hard drive is formatted in HFS file system + and not NTFS. Windows does not recognize HFS +. In this way, Windows users will not be able to access the hard disk.

  Alternative methods may be available with Mac. Please contact Apple support in this regard.

• How to set up and maintain newtab number of thumbnails?

  How can I stop change newtab page each time it updates of Firefox? I liked the miniatures of 3 x 3, then it changed to useles bar + 2 x 3 (luckly I could restore it to 3 x 3) and now (firefox 33) it's 2 x 4 ignoring that is configured in all: config 3 x 5 (if I change change newtab 3 x 3, 2 x 3), a few thumbnails I had in the bottom row appear also when moving the other.

  I don't know what is happening with the prefs lines and columns in all: config in Firefox 33, but I - https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/ - installed and it works fine in Firefox 33 to set up the columns and rows of the "best sites". I like being able to have a selected image as the background for the new tab page.