Setting authorization and sharing

Similar Questions

• How to set security and sharing to full control under windows 7

  How could I go to check where change or set my security and sharing to full control under windows 7.

  Thank you.

  Hello

  I suggest to check the following links and check to see if it helps:

  What to know before applying permissions to a file or a folder: http://windows.microsoft.com/en-us/windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  Most of file sharing: http://windows.microsoft.com/en-us/windows7/file-sharing-essentials#section_4

  Share files with someone: http://windows.microsoft.com/en-us/windows7/share-files-with-someone

  Hope this information is useful.

• shared variables stops when I use RT Set date and time.vi

  Hi all

  I have a problem that I can't solve. I run a project of RT on a PXI-8106 module using LV8.5. I used shared Variables to transfer data to and from my host computer for about 6 months with no problems. Recently I neeeded to the synchronization time RT with my host PC of time (to collect time-stamped data of the target RT) and I decided to use the "RT set time and Date.vi ' both before the beginning of each synchronization test.

  As soon as I started using this vi, I noticed that my shared variables would either stop updating, or slow down considerably (this includes loss of data during the transfer of data between the PXI to host PC with shared variable). I do not receive any errors or warnings from any of my shared variables, and no errors are generated when using the RT set time and Date vi, so im at a loss for where to start. Ive disabled this feature for now and my system works well again, but I want to get this to work because the timestamps generated in the data by the RT system are out and I need a method to synchronize the time with the host pc.
  Any ideas would be appreciated,

  Thank you

  David

  Thanks for the info. I'll avoid upgrading to 8.5.1 at the moment so I'll just remove the VI. Instead, I create a 'elapsed time' timestamp which should do the job.

  See you soon,.

  David

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• Y at - it an instruction step by step to set my network/sharing

  Hello

  Y at - it an instruction step by step to set my network/sharing

  I have a desktop Imac 21.5 on the LAN and a macbook 13 "pro on wifi

  I'm using DHCP

  El Capitan osx

  I can see every computer in the finder and can access

  However I just can't in files

  Tony

  There are a few things to put in place.

  You access the Macbook to the iMac or put in place for the Macbook can access the iMac? Or both?

  Her are a few step by step to try.

  How to connect with the file sharing on your Mac - Apple Support

  http://computers.tutsplus.com/tutorials/a-beginners-guide-to-OS-x-file-sharing--Mac-53206

• Problem setting up family sharing

  I just bought my daughter an iPod touch and I would like to add to the family sharing. I created an email for it in hotmail. Checked his age avec.50 at Microsoft. My problem is when I click on iCloud and click on the family, it is said that an invitation is sent. If I connect in its my iPhone email account and click on the email asking me to 'Get Started '.

  Once there he asks me to accept what I do. But then it says, invalid Invitation. He said: I'm already part of this family, go back to iCloud defining and tap on the family to review the settings of your families.

  Help!

  Thank you

  Marc

  Hi Marc,

  Thank you for your participation in the communities of Support from Apple.

  Looks like you're accepting the family share the invitation sent to the e-mail address of your daughter with your iPhone. Accept the invitation will be implemented a family sharing on the device you are in time, then try the same steps on your daughter touch iPod should work.

  For reference, here's more information to set up the sharing of the family:

  Join a family group

  You can accept or decline an invitation to join a family of your device:

  • On your iPhone, iPad or iPod touch, go to settings > iCloud > Invitations.
  • On your Mac, choose Apple menu > System Preferences > iCloud > family to manage.
  • If the invitation is sent to your e-mail address, you can respond to the right of your e-mail address.

  To accept an invitation, follow the instructions on the screen. Here is what you will be asked to do so when you register:

  • Confirm your Apple ID and password.
  • Choose if you want to share your content and that Apple ID you want to share.
  • Choose if you want to share your location. If you agree, your location can be displayed on devices of members of the family find friends and Messages, and the location of your shared devices will also appear on devices of the family members to find my iPhone.

  If you cannot accept the invitation, see if someone else has joined a family with your Apple ID, or is sharing content purchased with your Apple ID. Don't forget, you can join only one family at a time, and you can only switch to another family group once a year.

  See you soon.

• My outlook express won't let emails through. I am getting an authorization and then an error will appear.

  Outlook express won't come through

  My outlook express won't let emails through. I am getting an authorization and then an error will appear. Sometimes it will say: reception of messages, but none will come by.  A box appears and says that he put an end to the connection, maybe because of the connection to the server, the long period of inactivity or network connection. Also, I get a message on and which was completely removed several times on the file inbox and delete. I have no idea how to solve this problem or what I did to make it. I've never experienced this before.

  You probably have the widespread corruption of dbx files. Try in a new identity.

  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  In addition, follow these guidelines to help avoid this in the future.

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Can't see installed and shared printer

  I can't see my hp printer installed and shared on a new Lenovo A58e ThinkVantage Desktop PC with windows XP from ThinkPad running windows XP.

  I have set up working groups as well, appropriate manually and by the network installation wizard.

  I have a checked and made sure that the file and printer sharing are enabled in the network adapter properties page.

  I checked in the Toolbox of Lenovo and it says that the file and printer sharing is enabled, so the printer is shared also.

  I also disabled McAfee firewall and Windows Firewall.

  NOTE: I met a similar problem before with ThinkPad Laptops, when the file and printer sharing would not stay active in the properties of the device, found the problem being to think software, specific to 'Think access', the software kept turning off files and printers, sharing, so I allowed him by the profile of the software Manager, and all laptops could see file sharing and printer.  However I don't see any 'Think access' software, just the 'Lenovo' Toolbox

  Thanks for your time, everyone.

  go to the network properties and install the IPX/XPS/Net bios strictly only for printer sharing network card only.

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network and sharing Center (no answer)

  I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

  1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

  2. to turn off the automatic setting:
  Run as administrator command prompt.
  Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

  You may also need to run this command:
  netsh interface tcp set global rss = off

  To activate the auto adjustment:
  Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

  To view the current TCP settings:
  Type: press and "netsh interface tcp show global" (without the quotes) to enter.

  I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

  Any yelp would be appreciated!

  Beppe!

  Nothing is perfect!... .but it should work!

  B3PPE,

  See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

  I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

  Our final recommended option for the problem that you encounter will be a Vista repair install:

  <><><><><><><><><><><><><><>

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  <><><><><><><><><><><><>

  It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><><><>

  Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

  <><><><><><><><><><><><>

  Report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Network and sharing - Center identification... (Public network) Loop

  Hello

  For some time now, I had problems with the SP1 Home Premium Windows Vista x 64.

  Basically, I have 3 HP laptops and a PC to measure any connection to a router that I am wanting to set up like a home network private.

  The router I'm using is a Netgear WGT624V4 using the latest firmware available.

  I have also a Netgear WG111T Wireless USB adapter Belkin F5D7050B Wireless USB adapter and a built-in network adapter Atheros 5007EG.

  When I put all cards wireless network, they connect very well and let me to set the sharing and network name for the private network, etc.

  However, after re-booting of Vista, if I open Network Center and sharing, I show that the network is listed as identification... (Public network). He's going to stay like this for 30 seconds or so, then connect to the network private accordingly, but after 5 seconds, then return to the identification... (Public network) affirm once again and will continue this loop until I have disable or remove wireless adapters, disconnect the network or reboot the machines.

  And even after that, there is no guarantee that the network will be identified correctly and it will more than likely the same loop as shown above.

  Any help with this is greatly appreciated. Andrew.

  Nope, turning on the firewall while setting up the network did not help. Always had problems with Vista 64 hang on 'public' for a few minutes, then spend "Private" only return to "Public" shortly there after.

  It seems that even if stop you the firewall from Windows services settings always run in the background. Bit tricky blighters!
   
  I found myself fixing by the entry into service of Windows Firewall and 'Disable' Services completely, now I'm only show as 'public' for about 30 seconds, while it finds its place in polite society (my network).

  All seems well now that I'm running as my routers firewall.

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can we have a space for documents, created by the members, approved by oracle dignitory and shared for all?

  Dear all,

  Is it possible that we have a space where all documents... created by members... regarded as valuable and approved by an authorized Oracle... and shared staff for all...

  This can be useful for generations to come... I strongly believe...

  Simply add to the question under: can we share with the Community (related to oracle) document which can be useful for someone..?

  and allow users to create community Documents

  Thank you and best regards,

  Séverine Suresh

  ... I agree!

  As Community Manager for the database and the spaces Dev App, I can

  work with you to post articles (in addition to blogging

  approach set out below.   If you want to publish an article, the first friend

  me, so we can communicate by message on the platform.

  And then create the document in your profile (HTML preferred) and cc: me as

  a collaborator. (@Laura Ramsey-Oracle)

  I can quickly passes in review (formatting and TM checks especially) and then I

  can move the article to the designated space.

  See you soon!

  LKR