How to set the NLS_COMP parameter to the instance level?

Similar Questions

• How to set the entry level of voiceover?

  Hello

  I use Soundbooth to record my voiceover work. My equipment includes a MacBook Pro and a Samson CO1U microphone. It doesn't seem to be anywhere to adjust the input level (record). There is a setting of the slider in the Audio (Soundbooth) dialog box that you can access when you press record, but the slider itself is not accessible (i.e. When you try to drag, it is locked, and nothing happens). Anyone have any ideas? I would really appreciate it!

  Thank you

  Vixter

  Sounds good!  I'll have to ask one of those for the laboratory.

  Have a nice day

• How to set the parameter reset?

  I put the (url, clipStartTime, clipEndTime) alone in the StreamingURLResource class

  How to set the parameter reset? I want to NetStreamPlayTransitions.APPEND set

  THX

  Mike.

  This is not currently supported with OSMF.  You use this feature (APPEND) regularly?  If so, you can file a request for improvement with use case here?  Thank you!

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the HostDiskPartitionAttributes property when creating Vmfs volume

  Hi all

  When creating vmfs datastore through vlume

  programmatically, I need to partition the vmfs volume. here my question

  is an idea how to set the HostDiskPartitionAttributes there is a

  parameter to create vmfs vloume. Here I use Vdisk lun san

  "that will have the size, raid, stripesize... by this I need to set this.

  HostDiskPartitionAttributes ' property.could someone help me please. "

  Note: it's links to the document:

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html

  is the method that you need to find CreateVmfsDatastore.

  Thank you

  As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the default android home page.

  How to set the home page in the latest browser of firefox for android?

  Hello:

  Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.

  Please read this article for instructions.

  I hope this helps!

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!