How to set the restriction to access CLI/DNIS-based 5.3?

Similar Questions

• How to set the user who accesses the repository

  Hello
  
  I know that we can create the user and group in the tools-> Security. And if this user is belongs to the Administrators group, it can access RPD and some change...
  
  Can we create group or user that accesses the RPD in some cases (as mentioned in the HELP, A could access the repository every Monday and Wednesday, B can access the repository Saturday and Sunday) and how to define the privilege...
  
  Thank you
  Anne

  Hi Anne,.

  Add the user to the administrator group inorder to access the RPD, no choice.

  Rgds
  DpKa

  Published by: Dpka on October 19, 2011 10:51

• How to set the proxy to access the internet on photon

  Hello

  I've deployed successfully photon OVA modeled on vSphere 5.5 installation, when I try to install docker by using the command " docker run -d -p 80:80 vmwarecna/nginx " it says impossible to reach internet. Since my installation is behind a proxy server, I tried to set the proxy in a traditional method of linux, however I am still not able to reach internet.

  Can you help me find a way to define proxy?

  So far, I tried proxy configuration by running the commands below.

  #exporthttp_proxy=http://foo:bar@server-ip:port/

  #export https_proxy=http://foo:bar@server-ip:port/

  I am using below link to install docker.

  https://github.com/VMware/photon/wiki/running-project-photon-on-vSphere

  Control and configure Docker with systemd

• How to set the binding on a LOV variable based on the value of the calling page

  Here is the scenerio: Page is a login (username and password) page and their values are stored in a pod of support. On successful login page two is called (createRequest) based on
  a view object 'Userequest '. One of the fields is EmpNo which is a selection on the element of choice ("EmpByMrgLOV" read only view Explorer that contain the variable bind "UserNameId"). I want only to be displayed in the LOV
  employees who report to connected users. I tried different ways to set this parameter, but without success. It's my first attempt using JDeveloper and ADF and 4 days have already
  was devoted to it. Can someone please tell me where and how to proceed? Be as detailed as possible. I use Jdeveloper 11.1.2.3.
  Thank you.
  
  Published by: spcornell on February 27, 2013 12:09

  If your still to know how to to this topic, here's an option. I hope this helps.

  -----------------PART 1-----------------------------------------------------------------------------------
  Override the default constructor as this.
  lov instance will be created after the entry of the TF of the 2nd screen, so by LoggenInUser then will start,
  and will be used to create the instance of lov uses this value as a bind variable.

  SerializableAttribute public class EmpByMrgLOVImpl extends EmpByMrgLOV {}

  private String myusernameid ="";

  /**
  * This is the default constructor (do not remove).
  */

  public EmpByMrgLOVImpl() {}

  Set usernameid here when built
  get the usernameid of the bean class - btw the bean will be updated on the Taskflow method call before execution and now and set in constructor
  FacesContext facesContext = FacesContext.getCurrentInstance ();
  ELContext elContext = facesContext.getELContext ();
  ExpressionFactory expressionFactory = facesContext.getApplication () .getExpressionFactory ();
  ValueExpression exp = expressionFactory.createValueExpression (elContext, "#{mySOMEBean.LoggedInUser}", Object.class);
  This.myusernameid = (String) exp.getValue (elContext); set the user to act as link var

  }

  {} public void setmyusernameid (String myusernameid)
  This.myusernameid = myusernameid;
  }

  public String getmyusernameid() {}
  Return myusernameid;
  }

  }

  -----------------PART 2--------------------

  variable binding must Access EmpByMrgLOV VO using groovy as below

  You EmpByMrgLOV YOUR query tab, add bind var as below:
  Name = EmpSOMEUser (change to what your query)
  Type = String
  Value = ADF. Object.viewObject.myusernameid

  -----------------PART 3--------------------
  Once you have created a method taskflow run between your fist and 2 nd page, add set / gets in the bean for the var as below

  public MySOMEBean {}
  private Stirng LoggedInUser ="";
  {} public void someMethodCalledBeforeTFEntryintoSecoundScreen (String loggedinuser)
  if(loggedinuser!=null)
  setLoggedInUser (loggedinuser);
  else {}
  System.out.println ("not loggedin user");
  setLoggedInUSer (null); This will result in a null btw pointer
  }
  }
  public setLoggedInUSer {(String loggedinuser) {blah blah}}
  public String getLoggedInUser() {blah blah}
  }

  So part3 gets put first based on what you collect on your first page, then
  part1 at lov construction that uses part3 for her time

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the java path on windows 8

  How to set the java path on windows 8

  Original title: Java

  Way easier access and the value of your PATH environment variable is as follows:

  1. Press + W to display the search settings panel
  2. Type "path".
  3. Choose "edit the system environment variables.

• How to set the shortcut keys for button in Apex

  Hello
  
  Could someone help me on how to set the hotkeys for buttons in the Apex.
  I need to use say ALT + S to send the page.
  
  The following thread on HTML DB refered to use the quick access key. but who could not work in my case.
  Re: operation of the app with the keyboard
  
  Pointers on making it would be useful.
  
  Thank you
  Vijay

  Have you tried to use the html buttons but change their class so that they look just like the model buttons?

  For example, assume that you use the 20 theme.

  together the style of button html button and below the button attributes set class = "t20Button".

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the default android home page.

  How to set the home page in the latest browser of firefox for android?

  Hello:

  Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.

  Please read this article for instructions.

  I hope this helps!

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.