How to set the type of device on a node in the CEAP

Similar Questions

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• How to set the bass and treble on the speakers of Windows XP?

  Original title: Windows XP are involved.

  How to set the bass and treble on the speakers of Windows XP?  Advanced button is not available to use.

  Hi YBatey,

  You can try to install the latest software/driver to be built in the audio part of the motherboard or sound card (if it is used in this computer).

  This can provide the feature you're looking for.

  For more information, please visit this link: How to manage devices in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the character encoding in Blackberry

  Hello

  In my application, I get the data using http server methods...

  now my question is that, in that the data is seen some like that

  ex: Córdoba, but inside, I do not like this...

  After some R and D, I thought that I have to set the character encoding...

  can someone tell me how to set the character encoding and how I can get all languges in my application

  See below the code for reference

   HttpConnection c = null;
                      InputStream is = null;
                      DataOutputStream os = null;
                      int rc;
      c = (HttpConnection)Connector.open("http://10.10.10.00012:8585CountryDatar;deviceside=true;");
                              c.setRequestMethod(HttpConnection.POST);
                              c.setRequestProperty("If-Modified-Since", "29 Oct 1999 19:43:31 GMT");
                              c.setRequestProperty("User-Agent", "Profile/MIDP-2.0 Configuration/CLDC-1.0");
                              c.setRequestProperty("Content-Language", "en-US");
                             /* Getting the output stream may flush the headers */
  
                              os = (DataOutputStream)c.openDataOutputStream();
                              byte[] res = net.rim.device.api.system.GPRSInfo.getIMEI();
                              os.writeUTF(net.rim.device.api.system.GPRSInfo.imeiToString(res));
  
                              os.flush();
                              /* Optional, getResponseCode will flush
                                  Getting the response code will open the connection,
                                  send the request, and read the HTTP response headers.
                                  The headers are stored until requested.
                              */
                              rc = c.getResponseCode();
  
                              if (rc != HttpConnection.HTTP_OK) {
                                 throw new IOException("HTTP response code: " + rc);
                              }
  
                              is =(DataInputStream)c.openDataInputStream();
                               byte[] data1 = new byte[256];
                               int len = 0;
                               int size = 0;
  
                              int ch;
                              StringBuffer sb = new StringBuffer();
                             while ( -1 != (len = is.read(data1)) )
                             {
                                  sb.append(new String(data1, 0, len));
                              }                
  
                           data = sb.toString();       //Here data is a string storing all data came from server
  

  Give us a break please.  I have other things to do!

  You set the encoding here:

  SB. Append (new String (data1, 0, len));

  Most of the servers give you UTF - 8, but you know that.  Anyway, if it is UTF - 8 follow these steps:

  SB. Append (new String (data1, 0, len, "UTF - 8"));

• How to set the font "ARIAL" family in the RichTextField?

  How to set the font "ARIAL" family in the RichTextField?

  I saw a LOF of the sample displayed how set the font family in the RichTextField, such as defined as CBTF_FONT.

  But how can I put it as Arial font? If it cannot be, anyone could list a family table of fonts available for use in the Blackberry?

  You are right, for these devices you can use fonts already on the device.

• How to set the alignment of the centre on TextField?

  Hi guys.

  I have not found how to set the alignment of the centre on TextField?

  Do you know how to set the alignment of the centre on TextField?

  Please share your knowledge.

  Thank you.

  Hello

  Hope this will help you

  Import net.rim.device.api.ui.component.BasicEditField;

  class CustomTextField extends BasicEditField {}
  {CustomTextField()}
  Super(BasicEditField.FIELD_HCENTER |) BasicEditField.FIELD_VCENTER);
  }
     
  public void layout (int width, int height) {}
  Super.Layout (getPreferredWidth (), getPreferredHeight ());
  setExtent (getPreferredWidth (), getPreferredHeight ());
  }
     
     
     
  public int getPreferredHeight() {}
  System.out.println("---");
  beginning 50;
  }
     
  public int getPreferredWidth() {}
  System.out.println("###");
  Back to 120;
  }
     
  }

  Now in your class that extends the screen or full screen add this class object.

• How to set the dependency?

  Hi, I created two projects in the framework still a draft package is based on another medium he uses this project with the class. I am therefore unable to build the project.  In the samples under folder browser 'BrowserFieldDemo' and 'commonlib' of projects with the same addiction they began compiling correctly.  But iam unable to set the dependency it please tell me how to set the dependency.

  My project folder structure:

  com\adea\blackberry

  -Project1

  ------------------------File1

  ------------------------File2

  -project2

  ------------------------File1

  ------------------------File2

  Thanks and greetings

  Sunil.G

  Set the type of project that will be used by another project like 'library '.

  And this library project will be available for you to create dependencies.

  http://picasaweb.Google.com/tbilisoft/BlackberryForum#5275894851814275858

• How to set the java path on windows 8

  How to set the java path on windows 8

  Original title: Java

  Way easier access and the value of your PATH environment variable is as follows:

  1. Press + W to display the search settings panel
  2. Type "path".
  3. Choose "edit the system environment variables.

• Documaker: How to set the overflow by page 2

  Hi Experts,
  
  I want to put the overflow of 2 per page.
  Overflow works, but a part of the production is superimposed on 1 page.
  I can't set the overflow by 2 pages?
  
  1 formA (contains Subform1)
  2 Subform1 (contains Subform2)
  3 Subform2
  
  Subform2 has 2 pages (pages 1/2).
  
  Subform1 on proforma is the overflow setting when the trigger by XML.
  Search mask (counter)!: / xxx, data, repetition, repetition
  
  Subform2 on Subform1 offers which are always repeated 3 times.
  Reference:
  Documaker: How to define repeated 3 times exceeding always.
  
  For example, there are 2 types (Type 'X', type there "") in "Repeat".
  In the test, sample output is as follows.
  I want 12 pages output, but output data are 11 pages because PAGE 6 superimposes itself on 1 page.
  (1), (2), (3) East County. (Always 3 times a 'Repeat')
  
  PAGE 1: TypeX (1) - page1
  PAGE 2: TypeX (1) - page 2
  PAGE 3: TypeX (2) - page 1
  PAGE 4: TypeX (2) - page 2
  PAGE 5: TypeX (3) - page 1
  PAGE 6: TypeX (3) - page2 is encroaching TypeY (1) - page1
  PAGE 7: Typical (1) - page 2
  PAGE 8: Typed (2) - page 1
  PAGE 9: Typed (2) - page 2
  PAGE 10: Typed (3) - page 1
  PAGE 11: Typed (3) - page 2
  
  Please tell us how to set the overflow by page 2.
  
  Thank you

  It always seems that you have your typed page (1) configured to use an absolute origin and defined on the same page as your another subform.
  If your know you will have to TypeX and typed elements and you want the TypeY to start on a new page, then you must go back to the provision of origin in DMStudio and create a new page and start the subform to TypeY on its own page.
  By definiing two subforms on the same page of the form and each giving origin start to ABS 0, you say that the two elements can co-exist on the same page. That might be true if they are mutually exclusive where you would have only one or the other. But if you can have both, you can't have the second subform have an absolute origin. Otherwise, he will always overlap all that exists on the page where you set trigger.

• How to set the alignment of the field in a table in jdev 11.1.2.3?

  Hello
  How to set the alignment of the field in a table in jdev 11.1.2.3?
  for example: to display a body of numbers in a table as right aligned.
  I tried to put field (amount) VO UI Hint Format Type: Number; Format: 0000.00
  and jspx, flowing, but it doesnot work.
  Thank you.
  Bao
  
  < af:column sortProperty = "#{bindings." VO1.hints.amount.name}.
  sortable = "true".
  headerText = "#{bindings." VO1.hints.amount.label}.
  ID = "c44" width = "60".
  Align = "center" >
  < af:inputText value = "#{row.bindings.Amount.inputValue} '"
  label = "#{bindings." VO1.hints.amount.label}.
  required = "#{bindings." VO1.hints.amount.mandatory}.
  columns = "#{bindings." VO1.hints.amount.DisplayWidth}.
  maximumLength = "#{bindings." VO1.hints.amount.precision}.
  shortDesc = "#{bindings." VO1.hints.amount.ToolTip}.
  ID = "it58.
  secret = "false".
  inlineStyle = "" text-decoration: overline; ">"
  < f: validator binding="#{row.bindings.Amount.validator}"/ >
  < / af:inputText >
  < / af:column >

  Hello
  To set a field right alignment in a table:
  It doesnot work when InlineStyle-> text-align: right;
  It works when ContentStyle-> text-align: right;