How to set up a gallery of videos Vimeo

Similar Questions

• How to set the time of the video?

  There is a control named VideoPlayer (not VideoDisplay), and there a porperty named currentTime which is read-only, so I can only read the time! But how do I set the time.

  for example, when I press a button, I need 3 min video game, how to?

  Thank you!

  A function like this should help

  private void jump (): void
  {
  VP. Seek (50);
  }

  VP is the name of the videoplayer and (50) corresponding to the time you want to access in seconds

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• How to set up Adobe Premiere Pro CS3 to read. MTS video files?

  How to set up Adobe Premiere Pro CS3 to read. MTS video files?

  CS3 does not support this format.  MTS/AVCHD support was not introduced before CS4.  Convert the files to something else.  You can use a free program called Handbrake to do.

• How to set up a video in Muse?

  How to set up a video in Muse?

  The best way is to download on Youtube or Vimeo and embed him. However, you can find some video widgets to www.musewidgets.com.

  You can also go to www.123Muse.com. They had a full on audio and video editing.

• How to set a video clip for canvas

  I have 2 objects to animate in Adobe, MovieClipA, and MovieClipB movie clip

  MovieClipA has 10 images on the first and the last picture is the code this.stop ();

  MovieClipB has 2 frames, on both images is the this.stop (code);

  I also have a button, which when pressed parts MovieClipA using the play(); function.

  I want to play once MovieClipB MovieClipA hits frame 10.  I put in MovieClipB.play (); but it says that movieclipb is not defined.  How it set if javascript can read?

  MovieClipA and MovieClipB are at the same level. If you try to talk to one inside the other, the script is not at the same level it's a down from there. "parent" is the way that direct you to the level you upward. Yes, mother. MovieClipB go to the right thing.

• How to make a miniature that has a gallery inside? And how can I make this gallery have embeded videos vimeo + Images?

  Hello

  I'm pretty new to Muse, so I don't know much about it, but I did a lot of research and have not found an answer to this question.

  I'm doing a portfolio site. The Web site will be a 12 thumbnails. But each thumbnail is a project, not a picture.

  When you click on one of the thumbnails, I want a viewer that will show you embeded videos vimeo mixed with images.

  Ex: A coca-cola project.

  Home page has a thumbnail of an image of coca cola. When you click it, it opens a viewer with a film of coca-cola, when I click on the arrow to the right, it shows a poster of cocacola, then another poster, then another video. (but they are all part of this gallery, which is inside the thumbnail.)

  Can you guys help me?

  Thank you!!!

  At each widget, wenn selected arrow, a little blue in the upper right corner. Clicking on it opens a panel:

  

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set permanent stabilization in Camileo S10

  Hi all!

  I would like to know, how to set permanently stabilization in Camileo S10.

  Thank you.

  Hello

  If you are in the record menu press the OK button.
  In the video mode menu, you must change the stabilization of off to on. Then press the OK key to validate the settings.

  But don t forget the support of stabilization doesn t HD (1080 p) and WVGA (60 fps).

  Welcome them

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to change Windows Photo Gallery to be default for images of the camera?

  Can someone tell me please how to change windows photo gallery to be the default program for my camera. Also, if I delete pictures in the gallery it also removes that I put in a separate folder.

  Help.  Thank you

  Hello

  These could work and be sure to check with the manufacturer of the camera for other options.

  Use another program like the default binding for the types of files instead of the Windows Photo Gallery.

  That Picasa support associations or assign to it.

  Picasa - free
  http://Picasa.Google.com/

  Or

  Install Irfanview and do take care associations:

  IrfanView - free - download plugins too
  http://www.IrfanView.com/

  Or:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• Eclipse plugin Simulator - how to set up the network

  Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):

  Here's the code I used:

  S StreamConnection = null;
  Try

  {

  s = (StreamConnection) Connector.open (getUrl ());

  HttpConnection httpConn s = (HttpConnection);

  State int = httpConn.getResponseCode ();

  ...

  }

  So my question is how to set up the simulator so that it can open the connection to the network.

  Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.

  To understand the parameter deviceside and information about network gateways, see the following resources:

  DB-00396: that is - different ways to establish an HTTP connection or socket
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Video of transport network:

  http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

  On BlackBerry's wireless data Transport Management - Part 1

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=832210&objAction=browse&s...

• How can I find and play my video?

  I downloaded videos from my camcorder to my PC, then used Windows Media Player to synchronize with my Moto Droid. He finished, and I expected to find in my Gallery. They don't show there. Anyone know how I can locate and read my video synchronized on the Droid?

  It doesn't have to be in the right format.  You will need to use a conversion on your computer program and convert it to MP4.  This is the format that is needs to be to play on the Droid.  If you got this camcorder, you should try to go back into the program and see if there is a function "Save as" and then save the movie as a MP4.  Then re-sync your droid in the sequence.  The reason why is not appear in your gallery is probably because the Droid can't play.  I hope this helps.

• How to set the value of tbn in MP4

  I use AE CC (12.0.0.404) to get the MP4. I have 3 machines and have the same configuration. Operating system is the same as Windows 7, but CPU and graphics card is different.  After I visited, I can get the files mp4 video.

  But when I check, I found that the value of "tbn" for each video is different on machine 2 AE even is rendered with the same configuration. He helped the problem for split and merge video clips.

  1. why the value of tbn is different in each machine?

  2. how to set tbn in AE to make mp4?

  3. How can I change value tbn on video? I have all of the video as the same value of tbn.

  Thank you.

  I use AE CC (12.0.0.404)

  what you should be concerned about more than anything, it is that you use a buggy version. CC 12.0 as first version, had a few updates bug (and more features that you can use) since the first version of CC 12.0 - you should use 12.2

  to receive the MP4.

  Maybe you should try to export Mp3 by SOUL and see if you get consistent results. Since the CC, there was a decision to move SOUL æ compressed formats for a reason. the next version lost the ability to compress these outputs in total using Adobe Media Encoder to create H.264, MPEG-2 and WMV of After Effects videos | Creative blog Cloud by Adobe

  How to set tbn in AE to make mp4?

  I'm not sure that these settings are available even in the SOUL. Maybe this script can help you: AEmpeg - aescripts + aeplugins - aescripts.com , or maybe you can try 3rd party as brake hand encoder: https://handbrake.fr/ and get more consistent results of best