How to set up excel column width

Similar Questions

• Cannot set the DataGrid column width

  I am very frustrated with the DataGrid control and I don't understand why it won't work. I followed the tutorial "Build year Application In An Hour" by Adobe and finally managed to extract data from a database in a DataGrid control, the data very well, but all the columns are the same width and will not change when creating. Of course I can drag the column widths when the DataGrid control has made, but you shouldn't do that. The columns are not enough even wide to fit in the title of each column. The tutorial mentioned resizing of columns, but does not specify how. I've manually entered in the < S:GridColumn > tags and entered like width = "800" see no change. I changed the width of the data grid itself, I even tried setting the width to 100%. I also went in the "Configure columns" dialog, and then in advanced and set a minWidth, but it still doesn't work, I even disabled 'resize' and still nothing. I also tried different combinations of the aforementioned attempts.

  How can it be difficult to set the width of a column?

  I should also mention that I use Adobe Flex Builder 4.5 for PHP.

  Well, I solved the problem and I'm very embarrassed to say that it is my browser cache. It was not show my saved new, which is a bit worrying plans sometimes that I need to change the small values and run my application every 10 seconds to see the update.

• How controll in the report column width?

  Dear all,
  
  I created the classic report, but here the column width is too large.
  I want to the column width of the control in the report.
  
  How can I do this...
  
  
  Thank you

  I use Apex 3.2.

  It's a shame. Just try to change:

  Report--> Column--> column formatting attribute--> Style CSS

  for width: 100px

  Also make sure that your text to column heading to enough short to fit into the column.

  Rod West

• How to set the parameters of width image scroller

  I followed a tutorial on how to build an image thumb wheel. In this tutorial the scrolling of the image extends from one side of the stage to the other, i.e. flash to the edge. I want to shorten in width, as 50 pixels or the other side of the stage. How to set these parameters? What would be a line of code to cut where I want? Here's what I have for the construction of the wheel:

  /////Build Scroller MovieClip to Contain Each Image
  var scroller:MovieClip = new MovieClip();
  var padding:Number = 10;//creating a var for padding to be used later on in easier calculations
  
  this.addChild(scroller);
  scroller.y = 600;
  scroller.x = padding;
  

  (I tried scroller.x - but he only positioned the scrolling differently on the stage. Once it scrolls on mouse over it yet completely jumps to the left, and in any case it doesn't take care of the right edge)

  Chances are that you only need to add a mask for the scroller object.  Create a rectangle that is as wide as you want the thumbs on the stage that it becomes a movieclip/sprite and assign it an instance name.  Then assign it just like a mask for scrolling using the: scroller.mask = masksInstanceName;

  You may need to adjust the code of a scroller for use limits of the mask instead of the scene if it currently specifies limits for scrolling.

• How to set the height and width of dvt:piechart?

  Hello

  After upgrading to 10.1.3 jdev the new PIE is < dvt:pieChart >.

  I need to set the width and height or if not possible set the height and width of the container and let the repeating table using the container.

  Thanks in advance

  Emile BITAR

  Change this by using the attribute "inlineStyle". Set inlineStyle = "width: 200px;" height: 300px; »

• Cannot set the JTable column width

  I got into difficulty JTable column widths. The table is placed inside a get. I use getColumnModel () .getColumn () .setPreferredWidth () for each of the JTable columns but when displayed, they are all the same size. If I understand setAutoResizeMode (array. AUTO_RESIZE_OFF), I get the same results (only the table is not fill the frame). I created a short program that exhibits this behavior. What Miss me?
  

  package testTableData;
  
  import java.awt.Dimension;
  import java.util.ArrayList;
  
  import javax.swing.JFrame;
  import javax.swing.JScrollPane;
  import javax.swing.JTable;
  import javax.swing.SwingUtilities;
  import javax.swing.table.AbstractTableModel;
  
  public class TableData {
  
       private ArrayList<String>  col0 = new ArrayList<String>();
       private ArrayList<Integer> col1 = new ArrayList<Integer>();
       private ArrayList<Integer> col2 = new ArrayList<Integer>();
       private TableDataModel model = new TableDataModel();
       private JTable table = null;
       private JScrollPane scrollPane;
       
       TableData() {
            table = new JTable(model);
            table.setAutoResizeMode(table.AUTO_RESIZE_OFF);
            table.setPreferredSize(new Dimension(300,300));
           table.getColumnModel().getColumn(0).setPreferredWidth(200);
           table.getColumnModel().getColumn(1).setPreferredWidth(50);
           table.getColumnModel().getColumn(2).setPreferredWidth(50);
            scrollPane = new JScrollPane(table);
       }
  
       public JScrollPane getScrollPane() { return(scrollPane); }
       
       public void add(int index, String c0, Integer c1, Integer c2) { 
            col0.add(index, c0);
            col1.add(index, c1);
            col2.add(index, c2);
            model.fireTableStructureChanged(); 
       }
       
       class TableDataModel extends AbstractTableModel {
            private String[] columnNames = { "Col0", "Col1", "Col2" };
           public String getColumnName(int col) { return columnNames[col].toString(); }
           public int getRowCount() { return col0.size(); }
           public int getColumnCount() { return columnNames.length; }
           public Object getValueAt(int row, int col) {
               if(col == 0) 
                    return(col0.get(row));
                else if(col == 1)
                    return(col1.get(row));
                return(col2.get(row));
           }
           public boolean isCellEditable(int row, int col) { return false; }
           public Class getColumnClass(int c) { return getValueAt(0, c).getClass(); }
       }
  
       public static void main(String args[])
       {
          SwingUtilities.invokeLater(new Runnable() {
              public void run() {
                    TableData td = new TableData();
                     td.add(0, "AAAAA",  0,  1);
                    td.add(1, "BBBBBBBBB", 10, 11);
                    td.add(2, "CCCCC", 20, 21);
                    
                   JFrame frame = new JFrame();
                    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                    frame.setSize(400,400);
                    frame.add(td.getScrollPane());
                    frame.setVisible(true);
              }
          });
       }
  }

  model.fireTableStructureChanged ();

  Each time you call this method recreates the JTable the TableColumnModel that re-creates all the TableColumns for column widths to get back to their default values.

  I see no reason that you need to create a custom TableModel. Just use the DefaultTableModel. You can load the template with the default data or dynamically update the model using addRow/removeRow methods.

• How to set the height and width of the field control?

  Hello

  I created a ButtonField I need to set the height and the width of the field fixed. When the offset application from one device to another device about the size of the buttons vary and also content in the field of the key also retractable. I want to put fixed every time I moved my request to the other device, the display of the button must be set. How to reach this give me some code examples. I'm new to blackberry.

  ButtonField subclass and override the method getPreferredWidth().

  class FixedWidthButtonField extends ButtonField{
      private int width;
  
      FixedWidthButtonField( String label, int Width){
          super( label);
          width = Width;
      }
  
      public int getPreferredWidth(){
          return width;
      }
  }
  

  (code by Jonathan Fisher)

• How to set a null column in a where clause clause involving a statement box

  In oracle APEX, I a (selection list) element called: P32_STATUS. It contains two values of interest (for this discussion): 'Available' and 'checked '. In my report, I have a column called vc_status that contains two values: "Checkbox" and NULL. In my application I want to use a case statement in my where clause similar to the lines of

  where

  .

  .

  .

  AND (vc_status = CASE WHEN: P32_STATUS = "Checkbox" THEN : P32_STATUS )

  WHEN : P32_STATUS = 'Available' THEN NULL END)

  The 'box' filtering works but the filtering to try to vc_status the NULL value does not work. Can someone help me? Thank you!

  (P.S. My intuition says that there because I can not put vc_status = NULL, but I must say that vc_status IS NULL... However, I don't know how to do execution IS ZERO inside a CASE statement)

  Hello

  Your intuition is right...

  In Oracle NULL is a bit special:

  NULL = NULL is false

  NULL <> NULL is false

  Thus, instead of the parameter a NULL value in the CASE WHERE there is just set a value on the other side:

  NVL (vc_statut, 'Available') =: P32_STATUS

  That's all! Simple, clean and functional

• How to set an excellent type of cell as a text instead of general using owa_util?

  Hello

  I'm generating a csv file by using the following code. But when I open the file using excel, it excludes from 0 and also converts the cells in scientific format. I'm genrating the file using values from database table and I want the file exactly with the same values. I browsed a few forums and found that if I could convert the type of cell from the general text it will keep the values exactly how he got. I have no idea how to do that.

  Please notify.

  Code:

  Declare

  output_header varchar2 (4000);

  fichier_en_sortie VARCHAR2 (255);

  Varchar2 (2) EOL: = Chr (13) | Chr (10);

  BEGIN

  output_header: = q'~ ADBOR_ID, ID of path ~' | EOL;

  fichier_en_sortie: = 'report ' | ". CSV';

  owa_util.mime_header ("application/octet ', false");

  HTP.p ('Content-Disposition: attachment; filename = "" | ") fichier_en_sortie |' « ') ;

  owa_util.http_header_close;

  HTP. PRN (output_header);

  for r in)

  Select ADBOR_ID, from my_table Path_ID) LOOP

  HTP. PRN (r.ADBOR_ID|) «, » || r.Path_ID | EOL);

  END LOOP;

  END;

  -Compare the results-
  

  Entry effective from my_table from database. ADBOR_ID: 0296221924

  Output in csv (default cell type General): 296221924

  It's the scientific format also round the number like this:

  Real From my_table of database entry. Path_ID: 5878778827826

  Output to csv()default cell type General(): 5.87878E + 12

  Just prepend the numeric values with an apostrophe.

  Test in a file and when you load the file in excel, you will see that it is treated as text.

• Interactive report - how to set the default columns displayed

  Env: APEX 4.1
  
  For example, at the beginning, I created the reprot source as select c1, c2, c3 from t; later, I added c4. But I was unable to figure out how to do c1, c2, c3, c4 become the columns displayed default. I always have to click on Action-> select columns, and then move the C4 "do not display" to "report view". Any clue?
  
  Thank you
  Denis

  After choosing the columns (and the other changes you want)

  go to Actions > save the report > save as default report > primary, click [apply]

  I am on 4.1.1.00.23 and simply exercised these steps successfully with one of my IR

  If this does not work, I don't know what else to say. (If you are not connected to the Application Builder, you don't not even the default save option)

• How to set a dynamic column to count the quarter of each year?

  Lets see the result which now displayed:

  YEARS MONTHS SUMMONTH SUMYEAR SUMQUARTER
  ----- ------ -------- ------- ----------
   2009 Jan      127994 1766166     449652 
   2009 Feb      168106 1766166     449652 
   2009 Mar      153552 1766166     449652 
   2009 Apr      160329 1766166     438913 
   2009 May      137605 1766166     438913 
   2009 Jun      140979 1766166     438913 
   2009 Jul      148606 1766166     435283 
   2009 Aug      150390 1766166     435283 
   2009 Sep      136287 1766166     435283 
   2009 Oct      149529 1766166     442318 
   2009 Nov      153268 1766166     442318 
   2009 Dec      139521 1766166     442318 
   2010 Jan      124670 1721212     407181 
   2010 Feb      139278 1721212     407181 
   2010 Mar      143233 1721212     407181 
   2010 Apr      149518 1721212     444112 
   2010 May      152292 1721212     444112 
   2010 Jun      142302 1721212     444112 
   2010 Jul      149125 1721212     412855 
   2010 Aug      130328 1721212     412855 
   2010 Sep      133402 1721212     412855 
   2010 Oct      157754 1721212     457064 
   2010 Nov      137078 1721212     457064 
   2010 Dec      162232 1721212     457064

  The problem is about how Dynamic a new column called 'Q_count' to count each displayed line belong to which quarter of the year?
  In addition, she repeats once again next year.
  
  For example:
  * Jan - Mar 2009 will show "q1", Apr - Jun will display 'q2'... and 2010 Jan - Mar, he will again show "q1" and so will guess
  
  Here is my sql I use:

  select years,months,summonth,sumyear,sumquarter
  from(
  select years,months,summonth,sumyear,
          sum(sumhour) over(partition by years || to_char(ym, 'Q') order by years || to_char(ym, 'Q')) sumquarter,ym
          
  from(
  select years, months, days, hours, mins, sumHour, SUM (sumHour) OVER (PARTITION BY years,months,days) sumDay, SUM (sumHour) OVER (PARTITION BY years,months) sumMonth, SUM (sumHour) OVER (PARTITION BY years) sumyear, 
  to_date(years || months, 'YYYYMon', 'NLS_DATE_LANGUAGE=American') ym
  
  from (SELECT x.years, x.months, x.days, x.hours, x.mins, sum(x.value) as sumHour
  FROM xmltest, 
  XMLTABLE ('$d/cdata/name' passing xmldoc as "d" 
     COLUMNS 
    years integer path 'year',
    months varchar(3) path 'month',
    days varchar(2) path 'day',
    hours varchar(2) path 'hour',
    mins varchar(2) path 'minute',
    value float path 'value'
    ) as X 
    group by x.years, x.months, x.days, x.hours, x.mins
    order by x.years, x.months, x.days
    )
    )
    )
    
    group by years,months,summonth,sumyear,sumquarter,ym
    order by ym

  Thanks everybody helps me!

  Hello

  TO_CHAR ( TO_DATE (months, 'Mon')
          , '"q"Q'
          )
  

  Returns a string of characters 2 'T1', '2', "q3" or "q4" as you asked for it.
  You can use it in your main SELECT clause.

• How to set the height and width of an object

  I could not find in CS4.

  Thank you!

  If the object is on a separate layer, then you can just use Edit-> free transform to change it, otherwise, you will first need to select the object and then set up the free transform command

• How to put the 2nd column 1st column in excel

  Hello

  I have a question how to set the 2nd column 1st column in excel. Thank you.

  

  Why the 1 iteration for loops?

  Why two Index tables?  He's just trying to solve the problem created by the loops For on the original 1 d arrays.

  Two of these things create 2D tables which are what complicates things and can be eliminated.

  You can take your 2 1 d tables, use build table and right-click to set 'concatenate the inputs.

  If you have a 2D array, you can use table remodel to make a 1 column of the table of N line 2D.

• How to set the height width for an Image field in a web App?

  I have a webApp to save the image of user with description, title. But when I display all items pictures are great, I want to know how to set the height and width for images?

  Hello

  To do this properly, you need to resize the image. Prefably before you put it in British Colombia. While you can to scale the image in CSS, you don't want to do. Why? Because the images are still very large and probably not optimized properly for the web.

  This means that the page with these images will take a long time to load for people, and people will not be happy on the display of your site.

  You must use a software such as photoshop, if you or iphoto on a mac for example for editing, crop and size of the images before uploading. If you do everything you can use free web based tools such as this one:
  http://Pixlr.com/editor/

  You can also do in British Colombia itself in the file manager. If you click on the image you can see options to resize. The downside to this is's done it by pure mathematics. He doesn't know what is in the picture and the results can make the image etc. shrivelled.

• Proportional column width vs fixed tables (conversion of Ventura)

  Hello, all! I'm busily conversion (Finally, rebuild is a better word) Lighthouse weekly newsletter of our company publication of Ventura 10 for InDesign CS4 (PC version), while learning InDesign on the fly. About half of the publication resumed with tables of prices of 1,600 price guide. I read what I can on the tables, because they are so essential to our production process, and I quickly (sometimes 15 minutes of approval of copy/final price to get the file to the printer or emailing to subscribers).

  My question: am I right that there is no way to set a proportional column width in InDesign? In Ventura (for the non-Venturians there), I can set one of the columns as proportional. Then I can set the columns where I don't want the width to change as fixed and define the width of each separately (left column is 2, 11.900pp, a gutter is 0.6, etc.). Table resize all proportional columns, and the table is set up to fill the frame in which it is.

  I find I have to resize the columns individually, just as the word and then try to make sure that the entire table extend beyond the frame. I also find that I can not select noncontiguous columns to set them to distribute columns evenly. Since I rarely proportional columns right next to each other, I can't use this feature, most of the time.

  I want to just make sure that I only am not missed something as a novice to InDesign. In the example below, the columns 1, 5, 6 and 10 are proportional (in color, so they can be easily seen here). Then I size just the width of these columns, and everything else set proprtionally with a width equal to fill the frame. Any way to do with InDesign?

  Thank you! -Nancy

  

  Unfortunately, no. Miss me also the proportional column width.

  As you discovered, Indesign does not limit the width of the table in the width of the frame. So even if there was a setting to "fill the remaining space", it wouldn't work because Indesign is not a way to know what is the remaining space.

  Ken