How to set up the Cancel button?

Similar Questions

• Satellite P500-1DZ: how to set up the media buttons?

  Sorry if this has been asked before.

  Is it possible to configure these tactile media under my power button buttons? I use iTunes for my music and wants to be able to jump the tracks/pause reading that, for now, only work for windows media player.

  Im kind of a fool when it comes to computers so would like a step by step guide.

  Thank you

  Hi Joe11,

  Generally, buttons are designed for Windows media player and the Toshiba DVD player as you can read in the user's manual.

  They also work with Winamp as written Timox, but that's why you must change the configuration of Winamp.
  So the same thing you have to do with iTunes. Maybe you will find such an option, that they allow to use the illuminated buttons.

  Check this box!

• How to set up the email button to email forms

  I added an email utton to my form. Whenever I click on it it opens towards the top of my e-mail client & attach the form as it should. The only problem is how to attach the form to a .pdf file? At the moment he is endearing as a .xml

  Thank you

  This is because you might have placed a button to send email in the form. You can change the Type of button and set the control Type to validate.

  

  Thank you

  Srini

• How to set up the multimedia buttons on Qosmio

  Hey,.

  so I tried to configure my buttons on my Qosmio and sometimes I made a mistake and now I had a button all messed up my sound muted when I press on it, and I wanted to give him another function.

  Is there a way I can reinstall the Configuration of buttons of Toshiba or any other means I can reconfigure these buttons?

  Thank you

  Please, start preinstalled Toshiba utility support button and for each button use the option unregister.
  Can you do this?

• How to control the execution of a sequence of flat have the Cancel button

  Hello
  I have a question for you guys.
  Suppose I want to write a program to control a set of materials by sending commands via a serial port
  In fact, he calls a 'round '. Because a series of specific commands will send via a serial port at once specific time. What I call one a time Cycle.
  Between each send command steps there is a delay (waiting in range of Timing). The joint part of my VI.

  I was wondering how I can integrate a Cancel button which is able to act in any image of the flat sequence Structure?
  As you can see it is not everything in loops to have the best control of the program because I want to run commands in the series only once.
  Where to put the button 'Cancel' in frames?
  I want to show a confirmation message when the user clicked the Cancel button, and if the answer was 'YES' LabvIEW stops running flat sequence Structure and of the specific procedure to cancel (which is not included in above VI) takes place. Otherwise (by clicking 'NO') program continues to run...

  Note that home is just a simple version of what I intend to

  For example in some frames, it will be a while loop and so on...

  But there will be only on flat sequence at all

  Excuse me for my bad English

  Hi mostafi,.

  General answer: convert your flat sequence in a correct state machine States!

  Now, you can check your "Cancel" button after each State is treated...

• Re: Font book. I chose "restore standard fonts" by mistake. How to get back on my choice. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thank you!

  Re: Font book.

  I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!

  If you click on 'Restore the standard fonts', fonts that are not included in the OS X systems is placed in a "fonts folder (deleted) next to the fonts folder.

  / Library/Fonts

• How to set up the multimedia keys (only the last 3 buttons)

  Hello

  How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
  But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?

  Thank you

  Hello

  Can you please tell us what model of laptop Satellite A do you have?

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• How to keep the control on the same line after clicking the Cancel button

  Hello

  I use JDev 11.1.2.4.

  I have a search in a table (form A) that has a link to change another form (form B).

  Form B have two save and Cancel buttons with Commit and Rollback actions.

  Action on the Undo button is

  ADFUtils.findOperation("Rollback").execute ();

  Question: Suppose I'm at rank 3 on the form and click on the link to call the B form. Now, when I make some changes to the form B and press the Cancel button, the control returns to the row 1. I want to keep the control on line 3.

  any ideas?

  Thank you

  What do you mean by form? is this page?

  Is the form B and form A in the same page or diferrent?

  If the 2 form in diferrent pages you can add parent the iterator in the pageDef. of the child page

  To add iterator the pageDef parent. child follow this:

  1 - Open pageDef. of the child.

  2 - press executable section

  3. in the Insert item dialog box select 'Iterator' and then 'Ok '.

  4. you will find the DataControl extend above then select the Master iterator, then press 'Ok '.

• How to set up the execution in a way independent while loops?

  Hello

  I hope someone here can help point me in the right direction for that.  My system at this stage is still quite simple, I just data collection of 2 resistance probe and a pressure sensor, their output in the Panel before and sometimes to write.  I have put architecture in place to call parallel loops running at the frequency I would ideally like to do.  that is, I want the RTD to update every seconds and the pressure transducer for updating chaque.5s, I want to write to the file at a rate defined by the user and I want the Panel before updating a half second (correspondence with the pressure transducer).

  Now, in the structure, I wrote, it should run all the while loop once before it can restart the sequence.  Technically, the code works, but it takes ~1.5s to the RTD to collect and update and so the whole VI takes ~1.5s to complete.

  I don't care if the RTD is slow to update, but as I use the sensor as a gauge of the cell pressure I need to know at a high frequency that the pressure is in the cell, and I don't want to wait 2 seconds for the information.

  I know I'm starting to get into a much more advanced architecture for this and ive spent the last googler 6 hours trying to find a procedure for how it works but I can't figure out a way to have the whiles stop waiting for RTD loop finish.  I guess that this is to divide the VI in several screws and construction of a library, but the resources I could find about it were not very useful for a beginner like me.  If someone could point me in the right direction on where I should look then that would be great!

  Thank you

  Zach

  Zach,

  Because you created the tasks of data acquisition elsewhere, we do not understand how you have set up. Continuously, starting and stopping tasks may be slower than setting up of a permanent task and let it run.

  You have not indicated that you use the DAQ hardware.  It is often better to leave in the DAQ hardware clock set ignition rather than rely on software distribution. The pressure loop reads 1000 samples at a time and calculates their.  If you're not sampling at 2000 s/s or faster, the loop ends late due to waiting for data.  In two loops DAQ, you do not use the calendar information.  Acquire the data in tables rather than waveforms.

  The Dequeue functions in the loop at the bottom have no wait times for this loop will not iterate until all three queues have data. As the pressure loop runs faster than the loop of RTD, the queue of pressure slowly fills.

  The upper and lower loops are vying for the data.  The preview queue item does not delete data from the queue, but the functions of the Dequeue elements in the loop of the low fact.  If data is deleted form the queue before the upper loop resembles it, it will never be saved. With your installation there is no way to ensure that you get all the data or that you do not read and record the same data more than once.

  You don't have anything set up to stop one of the loops.  You use the Cancel button to stop your VI?  If Yes, STOP! Other aprticpant on the Forums said: "using the button abandon to stop a VI is similar to the use of a tree to stop a car.»  It works, but can have unintended consequences. "Things like closing of files, freeing up the queues, by closing the task of acquiring data, and other things can occur when the program is interrupted.  You do not shut down your computer by pulling the plug.  Stop your program also neatly.

  Ok.  I have highlighted some of the things that can keep your program to run as desired.  What can you do about them?

  1. you probably don't need call loops.  Normal so the loop should be good enough.

  2 put a stop button on the front panel. Put the terminal in loops (bottom) and connect it to a function to send a Notification and the status of the Terminal loop (stop sign).  Put wait Notification functions in each of the other loops.  Put a period shorter than the time loop minimum on all of them if the lops can work.

  3. see the comments above regarding the DAQ bed material.

  4 use the Dequeue timeouts to adjust the pitch of the loop the loop where the data is used.  Also make sure that all data is removed.  You need to think about your time together and what are the bottlenecks.  Except if you expect this system to grow to much larger dat sets, I probably acquire ALL data (pressure and RTD) at the same rate and reduce the displayed amount by the average like you do for pressure data now.  If you want different final data rates, just average different amounts of data.

  5. it might be useful to learn how to work the State machines.  Display, averaged and recorded files could be managed in a loop by a simple state machine while allowing for more flexibility in the calendar.

  6. Another good reason to consider a state machine is that initialization and shutdown processes can easily be handled in the corresponding States. At this point you do nothing with errors. A state machine would enable you to handle errors (for example, the cancellation of the selection of the user files) without stopping the program.

  Lynn

• Disable Validation on the Cancel button

  Hi guys,.
  
  I use jdev version is 11.1.1.5.0.I have done a validation custom for my Palm/editable grid table which i m, saving data on the button, click Save. Validation works perfectly except when I click on the button cancel next to my button 'save' his also validate grid table than i do ' t want to do.
  any suggestion how I can stop posting on the Cancel button.
  
  
  < af:table value = "#{bindings.ssku1.collectionModel}" var = 'row' "
  Rows = "#{Bindings.ssku1.rangeSize} '"
  emptyText = "#{bindings.ssku1.viewable?" "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings.ssku1.rangeSize}" rowBandingInterval = '0' "
  selectionListener = "#{bindings.ssku1.collectionModel.makeCurrent} '"
  rowSelection = "single" id = 't3' columnStretching = 'last '.
  "partialTriggers =": cb20: cb50 "
  styleClass immediate = "AFStretchWidth" = "true" autoHeightRows = "8" >
  < af:column id = rowHeader "c54" = "true" align = "center" width = "100" >
  < af:commandButton text = 'Details' id = "cb10".
  actionListener = "#{jcbwb.jcbOrderRowSelect}" > < / af:commandButton >
  < / af:column >
  < af:column sortProperty = "ssku_size_1" sortable = "false".
  rendered = "#{gridDetailsBN.ssku_grid_col_1} '"
  headerText = "#{gridDetailsBN.ssku_grid_col_1_hdr}" id = "c44" > "
  < af:inputText value = "#{row.bindings.ssku_size_1.inputValue} '"
  label = "#{Bindings.ssku1.hints.ssku_size_1.label} '"
  required = "#{Bindings.ssku1.hints.ssku_size_1.Mandatory} '"
  Columns = "#{Bindings.ssku1.hints.ssku_size_1.DisplayWidth} '"
  maximumLength = "#{bindings.ssku1.hints.ssku_size_1.precision} '"
  shortDesc = "#{bindings.ssku1.hints.ssku_size_1.tooltip} '"
  disabled = "true" id = "nonpopupit61" >
  < f: validator binding="#{row.bindings.ssku_size_1.validator}"/ >
  < / af:inputText >
  < / af:inputText >
  < / af:column >
  < / af:table >

  Hello

  Set in the immediate to true on the Cancel button.

  Zitouni

• I'm not setting up the sync button

  I know it's stupid, but I'm not setting up the sync button. I want to transfer my old PC bookmarks and read how do it, but when I click on the upper left button of my Firefox screen orange the only option seems to be to synchronize now. Any help is welcome. Thank you Joe

  See: Bookmarks > show all bookmarks

  • Press the F10 key or press the Alt key to bring up the hidden 'bar menu' temporarily.

  You get the orange Firefox menu button when the menu bar is hidden.

  • Firefox menu button > Options
  • View > toolbars (press F10 to display the menu bar)
  • Right click on empty toolbar space

  See also:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing
  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• How to set up the multimedia keys?

  Hello everyone!

  I have just a simple question! How I can configure the multimedia button on top of the keyboard? Cause when touch open media button its open Windows Media Player, but I put t want this, I want to win amp or bsplayer to open! How can do this? Thank you!!!

  Sorry for my English... I m French!

  Hello

  I tested it a bit on my Satellite P200 and I wasn't able to set up the play button to start WinAmp, but you can configure these buttons to work with WinAmp. It is very easy:
  Start WinAmp > Options > Preferences > Global Hotkeys to activate the option activate default multimedia has the support of

  After doing this, you will be able to use the multimedia keys with WinAmp, but you probably won't be able to open WinAmp when you press the 'play' button.

  Check it out.

• How can I change the music button on my keyboard to launch Windows Media Player to launch WinAmp?

  original title: program music keyboard key

  How can I change the music button on my keyboard to launch Windows Media Player to launch WinAmp?

  Thank you

  Drew

  As Mike Hall suggested, first look for the keyboard utility and seek to change the keyboard assignment there.

  If this option is not available, you can try to change the default program to open files of music. I do not think that "hotkey" keyboard music trying to specifically open Windows Media Play, rather it opens the program assigned as the default value for the music.

  So you'll need to get to the default programs control panel applet. To get there:

  1. Click Start , then Control Panel (in midway up on the right side)
  2. In the Control Panel window, click programs (not options, just the word more big programs). (If you have your set control panel to displayall items in the Panel control, then the applet default programs will be already visible and available directly)
  3. The second group of options should be the default programs. The two options here that should be of interest to you are:
     Make a file always open in a specific program type and (especially) set your default programs.

  You should find everything you need there.

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• When you click on the Cancel button, avoid running query

  Hello
  
  I'm going to the jsff a page to another at the click of a button
  
  In the second page I go back to the 1st page when the Cancel button is clicked
  But when clicked on this button cancel my request get rerun and takes a long time to come back on the 1st page
  This is a read only vo interview... How can I avoid running query on a button click Cancel
  
  Thank you

  Real question is: "why is your query run when you press the Cancel button?
  If your application is already running on the first page, this should not happen unless you:
  -to perform an operation on the Cancel button that runs the query
  -changed "Refresh" of your iterator property
  -perform rollback

  Dario