How to start a workflow by an event
Someone knew how to start a workflow OWB after an event occur?In my application, the workflow must begin (and import data) after a record OWB is insert in one of my table of database application. In fact, I schedule a task to watch every minute in the table. The problem is that every minute, a connection is open and close on the application database. In addition, the user must wait for a minute (maximum) before work is begin process. Can anyone have a way to start OWB on the event using the trigger, queue or something else?
Thank you
MB
UAS (your_OWF) .wf_engine. LaunchProcess (item_type, item_key, nom_processus);
If your process is defined as:
Module: PRC_MODULE
Process_flow_package: PRC_PACK
Nom_processus: PROCESS
then ITEM_TYPE is PRC_PACK,
ITEM_KEY can be anything, like p_process_name. » _'|| SYSDATE to ensure that it does not get doubled.
and nom_processus is the PROCESS.
So, when you call this function it would look like this:
UAS (your_OWF) .wf_engine. LaunchProcess ('PRC_PACK', 'PROCESS_24072009120000', 'PROCESS');
Tags: Business Intelligence
Similar Questions
-
How to start a workflow automatically?
Hello community,
I intend to develop a plug-in for vCO and ask a few questions. I hope you might be able to guide me in the right direction!
While developing a plug-in of vCO, is it possible or is it possible if I can somehow monitor the State of my objects (that I want to expose to the vCO) and whenever the state changes, a pre-generated workflow is executed in vCO. Somehow, I think it may be like this:
1 exhibit all objects and monitor its status.
2. If the state changes, call services web vCO to execute a workflow.
For example: I would write a plug-in, a little, exposing only some objects, when VM state changes power off on IT, a workflow in vCO is executed automatically. But this feature must be the plugin design inside.
Can anyone of you help me in this?
Thank you.
Hello
In this case, the mechanism to implement is a trigger. The plugin example of solar system provide an example of the use of triggers. You can also find references to triggers in the developers can serve as a guide.
A trigger can be used to resume a worfklow "in anticipation of the event" item or to trigger a political VCOs that can begin to flow any configured.
The plug-in vcenter already implements this VM power States.
Christophe.
-
How to start service apps without starting R12 workflow mailer?
Hi all
As a topic, how can I start service apps without starting R12 workflow mailer?
For example, I'm not mailer workflow (another early normal workflow service) started the course, I use adstrtal.sh to start the service.
My environment is: Oracle R12.1.2 | AIX 6.1
Concerning
TerryTerry,
The responsibility of the system administrator, go to the competitor > Manager > define and query "Service of Workflow Mailer", click on blood and change the number of process to 0. Or upgrade from the backend - http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_QUEUES&c_owner=APPLSYS&c_type=TABLE
Thank you
Hussein -
vCenter alarm action script to start a workflow vRO with curl
I have a script that I use on the vCenter servers to launch when an alarm is triggered, and this script will use curl to start a workflow vRO. Everything has been awesome to work until I've finished upgrading all servers in vRO to 7.x now I get this error
Server: ~ # /root/scripts/alarmaction.sh
* Subject to connect() to x.x.x.x port 8281 (#0)
* Try the connected.. x.x.x.x.
* Connected to the port x.x.x.x (x.x.x.x) 8281 (#0)
* successfully together certificate verify locations:
* CAfile: /etc/ssl/certs/root64.pem
CApath: / etc/ssl/certs /.
* SSLv3, TLS, Hello handshake customer (1):
} [data not shown]
* error: 140770 CF: protocol SSL routines: SSL23_GET_SERVER_HELLO:unknown
Closing connection #0
curl: (35): 140770 CF error: SSL routines: SSL23_GET_SERVER_HELLO:unknown
OK, so an algorithm of encryption or something got deleted in version 7.x. Can someone else me one that exactly and how do I add the encryption required to connect again?
Here's my alarmAction.sh in case anyone can use something like this
#! / bin/sh
{vcAlarm()}
# Create variables to store values consumed by Invoke-RestMethod command.
Server = "x.x.x.x"
url = » https://$server:8281/VCO/API/workflows/408d8e4d-1a95-46A4-bca6-efa3c24f81bb/executions "
# The cmdlet runs the URL encoding.
Cat >./alarmProps.txt < < EOF
" <-xmlns = execution context" http://www.VMware.com/VCO "> "
< Parameters >
< parameter type = 'string', name = 'VMWARE_ALARM_NAME' scope = 'local' >
< string >$ {VMWARE_ALARM_NAME} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_ID' scope = 'local' >
< string >$ {VMWARE_ALARM_ID} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_TARGET_NAME' scope = 'local' >
< string >$ {VMWARE_ALARM_TARGET_NAME} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_TARGET_ID' scope = 'local' >
< string >$ {VMWARE_ALARM_TARGET_ID} < / string >
< / parameter >
< type parameter is 'chain' name is 'VMWARE_ALARM_OLDSTATUS' scope = 'local' >
< string >$ {VMWARE_ALARM_OLDSTATUS} < / string >
< / parameter >
< type parameter is 'chain' name is 'VMWARE_ALARM_NEWSTATUS' scope = 'local' >
< string >$ {VMWARE_ALARM_NEWSTATUS} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_TRIGGERINGSUMMARY' scope = 'local' >
< string >$ {VMWARE_ALARM_TRIGGERINGSUMMARY} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_DECLARINGSUMMARY' scope = 'local' >
< string >$ {VMWARE_ALARM_DECLARINGSUMMARY} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_ALARMVALUE' scope = 'local' >
< string >$ {VMWARE_ALARM_ALARMVALUE} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENTDESCRIPTION' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENTDESCRIPTION} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DESCRIPTION' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_DESCRIPTION} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_USERNAME' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_USERNAME} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DATACENTER' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_DATACENTER} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_COMPUTERESOURCE' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_COMPUTERESOURCE} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_HOST' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_HOST} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_VM' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_VM} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_NETWORK' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_NETWORK} < / string >
< / parameter >
< parameter type = 'string', name = 'VMWARE_ALARM_EVENT_DATASTORE' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_DATASTORE} < / string >
< / parameter >
< type parameter is 'chain' name is 'VMWARE_ALARM_EVENT_DVS' scope = 'local' >
< string >$ {VMWARE_ALARM_EVENT_DVS} < / string >
< / parameter >
< / Parameter >
< / execution context >
EXPRESSIONS OF FOLKLORE
# Now run the Invoke-RestMethod command with all the variables in place.
curl-s-i-l - v--/root/scripts/cert/vco.key--/root/scripts/cert/vco.crt--cacert cert /root/scripts/cert/root64.cer - H - key "accept: application/xml ' h ' content-type: application / xml; Charset = UTF-8 "h 'permission = 'Base base64pass' ' u" user: password "x POST $url d @alarmProps.txt"
}
vcAlarm
RM./alarmProps.txt f
In vRO 7.0.1 Protocol TLSv1 is disabled by default. Could you change the sslEnabledProtocols property in the /etc/vco/app-server/server.xml file to "TLSv1, 1, TLSv1.2 ' "TLSv1, TLSv1.1, TLSv1.2", reboot and try again with curl vco-Server service?
-
Curl call to start the workflow with the Type of table / Composite
Hello I'm trying to start a workflow with an array type / Composite.
I'm using curl to make the call and post fields look like this when you send just a string:
{
"settings":
[
{
'value ':
{
"chain": {"value": "test"}
},
"type": "string",.
"name':"vm. "
"scope": "local".
}
]
}
How would he format if I had a type of table / Composite?
The composite type has the format of the Type / size and String / number
Well, I don't know like what your workflow, but here is what looks like my quick test workflow:
MESSAGE: https://YOUR-VCO-SERVER;8281/vco/api/workflows/475a3967-2c29-4140-a63f-ec1822ec330b/executions/
Headers:
Content-Type: application/json
Accept: application/json
And here is the json work to get into the body:
{ "parameters": [ { "value": { "array": { "elements": [ { "composite": { "type": "CompositeType(Type:string,size:number):drives", "property": [ { "id": "Type", "value": { "string": { "value": "NTFS" } } }, { "id": "size", "value": { "number": { "value": 20 } } } ] } }, { "composite": { "type": "CompositeType(Type:string,size:number):drives", "property": [ { "id": "Type", "value": { "string": { "value": "ext3" } } }, { "id": "size", "value": { "number": { "value": 25 } } } ] } } ] } }, "type": "Array/CompositeType(Type:string,size:number):drives", "name": "drives", "scope": "local" } ] }
I've included the workflow here as well.
Just a simple script:
System.debug("Drives:"); for each (drive in drives){ System.debug("================"); System.debug("Type: "+drive.Type); System.debug("Size: "+drive.size); }
My results:
-
How to call a workflow vCO by script?
Hi, experts
I would call a workflow via a shell script or a script powershell vCO? could you have an example of reference? Thank you!
You can do this by using vCO Rest API that you can call using curvature inside a shell script commands.
Official documentation. VMware vSphere 5.1
Otherwise, you can use vCO CLI to trigger workflow vCO.
http://www.virtuallyghetto.com/2013/08/quick-tip-automate-export-of-vCenter.html
-
How to purge the Workflow queue after upgraded to R12 before the Mailer WF?
Hello
We are about to upgrade to R12.1.3 of R11.5.9.
As part of the test, I configured and started the workflow Mailer in the new system. As soon as I did, the system began to send only a ton of notifications of recent approvals of requisition apparently waiting in line in the system. WF Mailer has been down since I did the last upgrade test.
We intend to approve applications from before the changeover in the old system, so there should be no e-mail notifications in the waiting. Is there a way to msg_state of these notifications was updated in the table wf_notification_out with a value of "READY", so we can ensure that we will have a clean system, and users will not receive notifications about recent requisition approvals?
Thank you
SinanPlease see these documents.
Note: 847889,1 - emails of Notification Workflow stop during Clone
Note: 828812.1 - how to stop the old e-mail Messages in Notification Workflow coming out during the activity of Clone
Note: 603003.1 - how to remove Workflow on a Test or a cloned Instance data
Note: 372933.1 - how to purge notifications by e-mail of the workflow queue so that the e-mail is not sent
Note: 736508.1 - how to cancel e-mail for the particular Type of Workflow NotificationsKind regards
Hussein -
Hello
We want to determine what events or user's activities to start workflows. This question can be interpreted in many ways, so for example, what form button causes workflow POAPPRV to start? We would like to determine for a long list of workflow that gave me.
Is it possible to determine this?
Thank youThe workflow engine API that start the workflow can be found below.
1 wf_engine. StartProcess()
The syntax is less than
StartProcess procedure
(itemtype in varchar2,
ItemKey in varchar2);ItemType is the name of the workflow that you listed for example: POAPPRV.
2 wf_engine. LaunchProcess()
The syntax is less thanprocedure LaunchProcess
(itemtype in varchar2,
ItemKey in varchar2,
process in varchar2 default ",
Take in varchar2 default ",
owner in varchar2 default ");ItemType is the name of the workflow that you listed for example: POAPPRV.
You can learn about events that will launch the workflow listed as follows.
In fact the event subscriber that has the type of action as "Send the event message to a workflow process" will launch the workflow.
You can find the subscription to events that will launch the workflow using query below
Select * from wf_active_subscriptions_v where wf_process_type = 'WFERROR.
wf_process_type - is the name of the process that will be launchedYou should run this query for each of the elements of the workflow
-
How to activate the Workflow Service Agent - E - BIZ R12 Oracle listener
Environment
DB: 11.1.0.7
Rel. Appl: R12.1.1
OS : RHEL 5.1 (x86_64)
Here is the work around is to bring up the WF Agent listener
After completion of the accessing the WORKFLOW system Clone,
Shippers notice status: down
Agent listeners: down
Fix components: down
-Workflow Notification Mailer is not required for this Instance
I did it after the NAVIGATION
Log in as a sysadmin
Go to system administrator > OAM > Wrkflow > fix components
Here this theres window a dropdown menu with the actions defined, I selected Stop ALL and click Go
a Req on submitted, when I checked administrator system > OAM > Wrkflow > Service components
Status of the components are disable ...
After awhile, I chose listener WF Agent and started OAM and another checked the concurrent application windows, it had ended normal and there was no exit and the file log and priority is 0
Please guide me what needs to be done to activate the particular service...
-ChetanPlease see these Docs MOS.
How to start the deferred Workflow Agent andWorkflow deferred Java Agent listener listener? [548918.1 ID]
"Service component container does not work" when you try to start workflow components [733335.1 ID]
Troubleshooting failure of workflow Agent listener on startup [ID 469009.1]Thank you
Hussein -
When to start a workflow it error
Hello
I m create wokflow, then registered, and start the workflow, but has no workflow. When I go with session log it errorout
"Cannot Fetch newspaper.
newspaper services has no record of executed requested session or workflow. \n ".
How to solve this problem.
Concerning
PrashantHello
Check the properties of the task by double clicking on the session > properties and check if the Session Directory log file property is set on $PMSessionLogDir\ and check if you gave the name of the log file in the Session log file name property and if you have not given the name of the log file and then specify the file name as xyz.txt or taskname.txt
Once you are done with the above step record the session and re - run the workflow and check the session log.
Thank you
Navin Kumar Bolla -
How to start working with BPEL [SOLVED] - but again can anyone help me :)
Hi all
I'm Fizzz, I'm totally new to BPEL. I don't know where to start and how to start.
Right now I'm working with JDeveloper 11 g R1. I didn't not go even further, but now I have to create a BPEL process that can integrate with my Web Application. There are some transactions to be approved or cancelled of BPEL and if the Transaction is approved, then I need to update this Transaction of Peoplesoft database. I have 1 week to learn it. and then I have to start my work.
But I don't really know where to start? What do I need? And how to proceed?
Anyone can suggest me the steps I can take to get started with BPEL and done with Peoplesoft connectivity?
I would appreciate your help.
Thank you
FIZZZ...
Published by: Fizzz on November 24, 2009 17:14go to this link
http://www.Oracle.com/technology/sample_code/products/SOA/index.html
Download the examples, you'll find a workflow folder inside that you have many examples of human workflow that reflects your requirement
-
How to start an application?
Hello
Maybe a stupid question.
I created a small test app and deployed via Eclipse. The server is started and running. When to start the Viewer, I see that the State of the application is "INSTALLED", but I don't know how to start the application. What Miss me?
See you soon,.
AndreasAndreas,
I think (and this is a guess) is that there is an error that kept the app to the executing State. I would try removing the application from the server and add it again. Are there clues in the output of the server when the deployment? You may need to adjust the server logging levels to see if there is some error events.
-
How to start a community Homekit (home app)?
Homekit needs love. How to start a community of support for her?
Excellent idea. I forwarded your suggestion to the moderators of Apple. Be aware, it takes time to get the results.
-
How to start a new text on iOS Apple Watch 3.
Hello
Instructions for sending a new text are available here:
-
How to start an iMac that keeps locking down to halfway through to start?
How to start an iMac that keeps locking down to halfway through to start?
What is your most former showing Mac in your profile? Or a new brand?
Head to your nearest Genius Bar are a great way to solve these questions - I suggest you make an appointment. the diagnosis is free. If this is a new Mac, take advantage of your guarantee and contact Apple technical support.
Maybe you are looking for
-
Satellite A30: Compatibility Intel 2200BG miniPCI WLAN
I installed an Intel 2200BG (Toshiba part No.G86C0000X310) Wifi card in my Satellite A30. I tried to load a number of different versions of Intel drivers, but whenever I activate the driver of that laptop computer crashes. I've seen other messages in
-
HP Pavilion dm1-4142nr Memory Upgrade
Hello I am about to buy the HP Pavilion dm1-4142nr of the Amazon and want to update to the maximum of 8 GB RAM. The problem is that I'm not sure if the one I picked up will work perfectly on the laptop, so I would be recognizing an Adviser on the iss
-
An update coming error code 66A 'windows warning 0000066A' 'windows update_dt000' to
There is a constant update install on my Start menu and whenever I click to install the update it is that the update can not be installed and displays error code 66A "windows update_0000066A" "windows update_dt000".It must be a necessary update for m
-
HP Media Center m8532f: what drivers I need to downgrade to 8.1
When I did a clean install of Windows 7 since Vista I have not a separate driver CD. I just loaded Windows 7 and everything worked perfectly. I do a CD of drivers back to 7 to 8.1? And if so what drivers do I need? Thank you
-
The framework of the call works on a Dev Alpha device?
Hello The framework of the call (to share of text or files to an application via the share button) works on a Dev Alpha device? It's my bar file - descriptor.xml - I want to register my app for the menu to share with the text: default false John Deer