How to start IrDA by the BIOS on my Qosmio F10?

Similar Questions

• Satellite U940 - cannot start or access the BIOS settings

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Posted by devondan
  

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

• How to start to use the Oracle client to access the database?

  People,
  
  Hello. I just installed Oracle Client (Instant Client) in the directory/home/myOracle/Oracle_Client.
  But I don't know how to start and configure the client to access Oracle database.
  
  Can all folk tell me how to start to use the Oracle client to access the database?

  user8860348 wrote:
  People,

  Hello. I've successfully used Oracle SQL Developer. But I want to know how to use the Instant Client.

  Can any folk tell me how to use the Client then just install it?

  I guess you're hurting understand the definition of Client instant, there isn't a tool or application or tool GUI as a sql developer or another that you can start using. It's just client installed with the minimum characteristics
  If you want to use the right application tool install sql developer in your instant client or simply running sqlplus

  See you soon

• T530 does not start after upgrading the bios to V2.65

  Hello..

  I flashed the Bios to V2.65 under Win 10 via Lenovo Systemupdate.

  After the restart I had set default Bios and save the changes.

  Start the laptop it hang in a window to select the boot device.

  When I press on my Samsung SSD EVO nothing happened.

  I'm trying to reinstall the Bios with boot-CD. Tool said: there is no need, organic cause is real.

  Downgrade to old Bios in possible (?) not...

  It please can someone tell how to fix this?

  It comes to my work machine, and this is a disaster!

  Thanks MajorM

  Hello..

  found the solution...

  > Disable menu security-> "secure starting".

  > Start menu: UEFI/Legacy Boot-> legacy set or both

  too long, I remember. I never had problems with the bios updates.

  but it was my last... never touch a running system

  See you soon...

  MajorM

• How to start DIRECTLY in the library (instead of starting firefox > bookmarks > show all bookmarks) is there a switch or something else to do?

  Rather than start FF and then go where I want via the bookmark to right, I would like to start * directly * to the library;

  -Today, I need to:
  1. open FF
  2. open the library
  3. close FF

  How to get to the library of everything right on, without going through the FF window first?

  Kind regards
  Alex.

  Launch Firefox with a chrome URL:

  firefox -chrome chrome://browser/content/places/places.xul
  

  • https://developer.Mozilla.org/en/Command_Line_Options

• Toshiba Satellite S50-B-12Z - how can I get into the BIOS?

  Hey, I have a new laptop - Toshiba Satellite S50-B-12Z.
  I want to knpw how to enter the BIOS?
  I have win 8.1

  Ty

  Press on and hold (or type) the key F2 when you power the machine on.

• Qosmio DX1210 starts plus-mise the Bios updated has no

  Hello

  I tried to do an update of the BIOS on my DX1210 last night to version 1.5.
  There is a write failure error message during the update and now the system does not start.
  Is it possible to reflash the bios when a bios update fails?
  I have all the files extracted on one but key USB bios I don't know what to do to initiate a bios recovery?

  Well, the BIOS problems can be solved only by a Toshiba authorized service partner.
  I guess the ROM module where the BIOS is stored, not properly was flashed.
  The Rom module can be flashed again using a disc special crisis.

  So I don't see a real option for you: get in touch with the guy from service for repair.

• Satellite Pro A300-28R - how to enable virtualization in the BIOS?

  I tried to enable the setting of virtualization in the BIOS and the setting is disabled and I was unable to change the setting to activate. I have flashed the BIOS to the new version, and now how to enable virtualization has completely disappeared.
  The laptop model is Satellite Pro A300-28R with Windows 7 Professional and BIOS version 2.10.

  How do I enable virtualization setting so I can run Windows Virtual PC mode to run compatible programs XP?

  Hello

  Did you check the specifications of your laptop first?

  The fact is that the processor must support this virtualization and according to the Web of Toshiba site, your laptop is equipped with processor Core 2 Duo T5870.
  I checked this on the page of Intel CPU and virtualization isn't supported. That means t, you can use this feature!

  Here you can see this:
  http://Ark.Intel.com/product.aspx?ID=37034

• Satellite U500 - how to enable VT in the BIOS?

  I can't find the ability to enable virtualization in the BIOS.

  It is possible on the model D 11, but I don't understand why only on this model.

  Can someone tell me, how can I patch the bios to enable this feature?

  THX.

  Hello

  Virtualization technology depends on the CPU!
  It is available only if the CPU supports it.

  Are you sure that the processor in your Satellite U500 supports VT?
  If it does not support this function so that could be one of the reasons why the VT is not available in the BIOS

• Laptop computer DV6174ea not start after upgrading the bios!

  HP dv6174ea lapop - Win XP media center edition with sp3 - processor intel core duo - 2 GB ram - 120 GB hd

  Ive just used the upgrade of bios of HP downloads flash to upgrade the Phoenix bios on my dv6174ea to version 2.9 1.06.Flashed successfully but on reboot it reaches windows XP start screen (black with logo) fails then a blue screen and restarts quickly. Same cycle occurs again and again. Ive tried to boot from the XP cd, but it gives the message "no hard drive not detected" and fails. detect the drives in the BIOS there is no options to the automobile.

  Curiously, a USB bbot containing paragon hard disk manager won't start and sees my drive (two partitions) and the system partition is active.

  I wonder if the flashing the BIOS changed settings or drive letters so that windows does not see properly. I wish there was just a simple option in the bios for detection of discs.

  Can someone pls help.

  If you want to start your computer from the xp cd, then enter the bios and it try to disable the sata mode and activate the ide mode and then try to format your drive... it should work... !!!

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Tecra A8: How to enable VT in the BIOS?

  I run vmware player on a Toshiba Tecra A8 with Intel Core.
  When you start vmware, he tells me, that my CPU (CoreDuo2 7200) is capable of VT, but this option is disabled in the BIOS.
  Can I change this setting?

  Some versions of the BIOS supports this option but I m do not know if this is possible on the Tecra A8.
  Simply access the BIOS and check the unique pages. If you find this option, you can try to activate. Otherwise it s is not possible.

  By the way: with ESC key to access the BIOS

• How to change language in the BIOS settings?

  I put the password on the L100 on the Russian language, and when I turn on the computer and correct password type that says invalid password, I think I need to change the language, I try to press alt - shift and ctrl-shift, but it does not work! How can I do?

  What? I've never heard language changing in BIOS and in my opinion it of not possible to do something like that.
  Hey Buddy, I think you just typed a wrong BIOS password
  Maybe you have mixed a few letters for example or a caps lock button has been activated

  Additional info: it of not possible to remove the BIOS password yourself if the old password of BIOS is not known.
  Only the Toshiba service provider is able to delete

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.