How to stop popups of Mozilla, I have since the last update

Similar Questions

• How can I stop Firefox open automatically at startup since the last update on the Macintosh under Tiger?

  Firefox will automatically launch at startup every time. I don't want it. If I want, I'll click. I'm not on the internet every time I start my computer and do not have to wait FOR it to start so I can leave. I don't know why she does - never done before - and it's EXTREMELY annoying! Help! I'm on a Macintosh running with Tiger OS.

  It is a setting of Mac.

  1. Click accounts (in the line of the System Preferences window system)
  2. Click the login items tab
  3. Click on Firefox in the list of applications
  4. Click on the "-" symbol

• Since the last update with el capitan, imac won't stop with the stop button in the Apple menu

  Since the last update in el capitan my imac and my macbookair will not stop or recover on the regular basis. I have to press the power button to stop the hard wayanybody a response?

  If your Mac is not turned off, press and hold the power button for 5 seconds to force a shutdown. Read more in this article OS X El Capitan: disconnect you, sleep, restart, and stop down

• I can't synchronize my notes on i phone 3GS with my i pad mini on icloud since the last update ipad mini in 09/2015. How can I reinstall that?

  I can't synchronize my notes on i phone 3GS with my i pad mini on icloud since the last update ipad mini in 09/2015. How can I reinstall that?

  Check that the switch of Notes is in green in the settings / iCloud in all devices.

• Anyone else have problems of administrator since the last update?

  I am SO ticked.  I am not able to install programs since the last update.  The manufacturer after that restore did not work is the system recovery.  I came to realize somewhere in the system of Windows, that I am not recognized as the administrator, even if the user account has listed me as an administrator.  If I right click and run as administrator, I can install and download.  Tried to find another solution on the Microsoft Web site, but can not. I'M SICK OF SCREWING THINGS MICROSOFT UPDATES AND BEING EXPECTED TO PAY TO DO REPAIR.  Does anyone else have a problem that does not require orders me to go the long restoration process!  That would be appreciated.

  Well, I think that I have finally confirmed that it was a problem of Windows Defender.  I was able to restore to the point before restoration 4 Windows Defender Update.  Everything is back to normal now.

• HP P1102 turns off after 4 hours since the last update of firmware - stop it turn off?

  I have updated the firmware and my printer drivers for the last realease (17/10/2012) on my P1102 printer. The printer now turns off completely after 4 hours. I changed the setting in the driver to "never turn off" but it makes no difference. It's a big problem that I use the PC connected to the printer via remote access and so I can print is no longer when I want to. How I either restore the firmware or stop the printer turn off please? Since the firmware update, I noticed also that when the printer goes to sleep the green light will blink each opten both before the firware update lights exploded when the printer has gone to bed. Can someone help please...

  Thanks in advance

  Hoddy

  Hi Hoddy,

  Follow the steps outlined in the document below. Let me know if this helps you?

  Auto shut-off delay time is too short

• Since the last update of Windows, I have problems with iastor.sys dpc latencies...

  ... Technology Intel Rapid Storage Technology on my Ideapad Y560

  Has been published since the last Windows Update (happened to autoamtically in the background ) I now have a few latencies.

  It seems to come from the LatencyMon also says iastor.sys driver.

  Tried to install the version the more recent but no luck. STIL have these DPC latencies every few minutes.

  I also see the spike in ProcessExplorer and DPC latency.

  How can I fix it (without breaking my Windows 7)?

  Seems, I solved it, updated Atheroes AR9285 to 10.0.0.75 downloaded from http://www.atheros.cz/atheros-wireless-download.php?chipset=37&system=6

  Lenovo should add these drivers to their download pages ;-)

• I can't stop since the last update

  Since the last up dat of El Capitan (June 3, 2016) I can't stop my Imac in the normal way. What should do?

  Outdated software for a Tablet Wacom can prevent the closing. If you no longer use the device, please remove the software. Otherwise, update the latest version of the Web site of the manufacturer.

  According to reports, after following the link removal instructions above, you may also need to open the users and groups in system preferences, select the login items tab and remove all Wacom related items. If true, the uninstall program is defective. I can't confirm.

  Back up all data before making any changes.

• Since the last update, Thunderbird the entire PC stops when the popup box appears after all messages have been downloaded.

  The last automatic update included a calendar function, which I turned off I thought it was at the origin of the problem. But now, after you have downloaded all the messages, I usually box pop up at the bottom right of the screen telling me that I received x messages but he only half fades and the PC all jams. CTR-ALT-DEL does not work and I can't switch to another window or even click on anything in the screen of Thunderbird. The only thing I can do is hard reboot the PC and turn off the router, which allows me to start Thunderbird without anything for download. I use Windows 7 and Avast as my AV. Any help would be appreciated gratefully.

  Hi Wayne

  Thank you for pushing me on this. The alerts began this morning. I had a weird 24 hours being taken in the Sky/O2 e-mail fiasco and there was another update to Thunderbird (and several Windows updates this week), so I don't know what makes it fixed!

  Thanks for your help

  Kevin

• How can I play the video on Comedy Central since the last update of Mozilla? (I can on Safari)

  Since today I can't see video on Comedy Central. I can add on Safari, but the blocker Mozilla love. It says to download Adobe Flash and turn on Java script. I tried. No change. I tried to downgrade to 10.3 and loaded Real Player Flash. No change. Help, please. Thank you!
  Terry

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the problems caused by the recent updates of Flash and try these:

  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting
  • https://support.Mozilla.org/KB/Flash-113-doesn ' t-charge-video-firefox

• Many aspects of the system have been changed since the last update

  My Windows 7 Ultimate did an update this morning at 03:00. When I woke up and went to my computer at 6:00, I noticed a lot of things have changed. All my settings are gone. All my passwords are gone. All my files on my desktop disappeared. All my themes Aero disappeared. All my email settings (Eudora OSE) have disappeared. My preferences folder disappeared.

  It is as if Windows 7 is returned to the original installation and you will have to start all over again. When I go to programs, it seems I have not lost anything, just the folders on my desktop which had shortcuts is gone. When I go to desktop customization, all themes that I had loaded down disappeared.

  I had created a restore point yesterday. It's over. This morning, the update created a restore point. I could guess the use this restore point, but will not be my system try to rerun the update? I just live with it and try to implement brand new? Don't they test these updates before release? Very frustrating!

  Hi TheFox22,

  There are several things that interfere during the installation of Windows update and cause a few problems.

  I suggest that you perform the restoration of the system to the point that was created before the updates were installed.

  If you want to install the Windows update again, you will need to disable the security software installed on the computer and also the third-party program installed on the computer step called clean boot, it's to stop their interference during the installation of the update of Windows.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  I suggest that you put the computer in a clean boot state and then go to Windows update and install all available updates and check manually.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Since the last update by microsoft 2009-08-11 my Pc stopped working...

  Although installation went well but since the reset, it is basically all he does... it stops of is blue screen and restarts until I finally get it in SafeMode... funny, it's all repair tools that microsoft provides only run in normal mode. But if the normal mode would go all would be well, no! SO, what can I do now except getting a MAC? It's basically Micrsoft fault. I tried restoring the system as 54 times and it works until it loads in normal mode and then the blue friggen see again. Also tried to repairs which began to work... but I think the update messed up my main drive... so any suggestions... do those repair work kits, which cost about $ 40? Or should I just reinstall the whole _ again and lose all my files... VISTA sucks big time that's for sure... I had my first blue circle after 2 hours after running this PC... XP was so much better!

  If you need to reinstall, save your data 1. info below.

  Try this free repair disk to try to repair it:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• How to recover a deleted folder inadvertently created since the last backup was made.

  I deleted file n all my libraries activities inadvertently.  I have a knowledge to navigate through all the solutions for this type of problem.  The last automatic backup is annex was made before the creation of this file.  This folder is still available on my computer and if so how to locate and recover?

  Hello

  There was a lot of rapport in these Forums of recoving posters their data (Photos, files, emails, even), using this free program.

  http://www.Piriform.com/Recuva

  See you soon.

• Since the last update to 9.1.2 email in my iPad 2 opens to empty the screen saying no messages selected, click the mailbox and select I bow to make appear messages. When the Inbox picks up the trash icon disappears also. How can I solve this problem?

  Since the 9.1 on my Ipad 2 update my email opens empty screen saying "no message selected. Just click on the mailbox store and select Inbox to display messages.  In addition, when appears in the Inbox, trash icon at the top right disappears.  Update to 9.2.1 thought to solve this, but it didn't.  Have tried reset etc but nothing works.  Anyone have any ideas?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• WebGL has stopped working since the last update of NVIDIA drivers. Decommissioning of the pilots did not help. WebGL is enabled, but it does not compile shaders and fail.

  I use Firefox on Ubuntu 12.04 49.0.2. Until a few days ago, WebGL worked. A few days earlier, it has stopped working (one day after I installed the latest version of the Nvidia drivers). I tried the option "enable force", without success. WebGL context is created, but debugging, it looks that the shader is not compiled (so made is not possible). I already tried to change the options on the angle, without success. I tried to downgrade the graphics drivers and their modernization once again, without success.

  My nvidia drivers are version 304.132 (latest version)

  OK, solved. The problem is caused by a bug in the NVidia driver, as shown here:

  http://UNIX.StackExchange.com/questions/321185/after-update-GLX-works-only-for-root-NVIDIA/321339

  After decommissioning, everything worked fine