How to take and post a screenshot on the HP Forum's Support.

RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr

RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr.

I want to have 3 separate raw images so that I can do HDR etc myself. How to configure this for example. + 1 0 - 1 EV exhibitions and be able to treat myself. I want to be able to do this hand and align etc. later. I'd be satisfied with +.7 ev 0-. 7 if that's all he can do.

Hi doshin! You can set the camera (support: suite) by going into MENU 2 [Drive Mode]. In this mode, the camera allows you to shoot in 3 different exposures. You can also set the value of the show of support.

If my post answered your question, please mark it as "accept as a Solution.

How to enumerate, and select in C++ in the list of formats PCM published by a recording device in Windows 7?

I used the following to open a wave in the device (USB codec) under XP:

waveInOpen ((HWAVEIN*) & hWaveIn, idWaveIn, (LPWAVEFORMATEX) & wfx, MainDlg (DWORD)-> handle, 0, CALLBACK_WINDOW);

How could I do this in Windows 7? The device is open with its default and no format approaches I tried to work. Default format is listed in the applet sound like 1-channel, 16-bit, 44100 Hz (CD quality). What I need is listed as 2-channel, 16-bit, 32000 Hz (quality FM Radio).

Method 1:
the value input to the PCM format
PropVariantInit(&varConfigBuf);
HR = pProps-> GetValue (PKEY_AudioEngine_DeviceFormat & varConfigBuf);
If ((hr == S_OK) & (varConfigBuf.vt == VT_BLOB))
{
if(varConfigBuf.blob.cbSize>0)
{
WAVEFORMATEX * pWaveFormatExBlob = (WAVEFORMATEX *) (varConfigBuf.blob.pBlobData);
If (pWaveFormatExBlob-> nChannels! = wfx.nChannels |)
pWaveFormatExBlob-> nSamplesPerSec! = wfx.nSamplesPerSec)
{
WAVEFORMATEXTENSIBLE * pWaveFormatExtensibleBlob =(WAVEFORMATEXTENSIBLE*) pWaveFormatExBlob;

pWaveFormatExBlob-> wFormatTag = WAVE_FORMAT_EXTENSIBLE;
pWaveFormatExBlob-> nChannels = wfx.nChannels;
pWaveFormatExBlob-> nSamplesPerSec = wfx.nSamplesPerSec;
pWaveFormatExBlob-> wBitsPerSample = wfx.wBitsPerSample;
pWaveFormatExBlob-> which nBlockAlign = wfx.nBlockAlign;//pWaveFormatExBlob-> nChannels * pWaveFormatExBlob-> wBitsPerSample/8;
pWaveFormatExBlob-> wfx.nAvgBytesPerSec;//pWaveFormatExBlob-> nSamplesPerSec = nAvgBytesPerSec * pWaveFormatExBlob-> which nBlockAlign;
pWaveFormatExtensibleBlob-> Samples.wValidBitsPerSample = pWaveFormatExBlob-> wBitsPerSample;
pWaveFormatExtensibleBlob-> dwChannelMask = 3;
GUID sf = (GUID) pWaveFormatExtensibleBlob-> sous-format;
pWaveFormatExtensibleBlob-> sous-format = KSDATAFORMAT_SUBTYPE_PCM;

HR = pProps-> SetValue (PKEY_AudioEngine_DeviceFormat, varConfigBuf);
if(hr == S_OK)
{
HR = pProps-> Commit();
}
on the other
{
ShowMessage (AudioError (hr));
}
}

This method adds a new entry (2 channels, 16-bit, 32000 Hz) to the list of formats under the Advanced tab, but the camera is still recording mono.

Method 2:
IAudioClient * pAudioInterface = NULL;
HR = pEndpoint-> Activate (__uuidof (IAudioClient), CLSCTX_ALL,(void**) & pAudioInterface);

WAVEFORMATEX * pDeviceFormat;
HR = pAudioInterface-> () IsFormatSupported
AUDCLNT_SHAREMODE_EXCLUSIVE,
AUDCLNT_SHAREMODE_SHARED,
& wfx,
& pDeviceFormat
);
CoTaskMemFree (pDeviceFormat);

HR = pAudioInterface-> Initialize (AUDCLNT_SHAREMODE_EXCLUSIVE, 0, 5000000, 0, & wfx, NULL);
SAFE_RELEASE (pAudioInterface)

Initialize() returns 0, but no changes to the format of the device.

Is it possible to enumerate the list of formats provided by the sound applet, and then select one of the people I know is supported by the device? It's probably pretty clear from the above, but in case not, I am scratching around the dark here and any help is appreciated (even with disparaging remarks included!).

Thank you
Piet

Hi Piet,

The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:

Windows WDK Hardware and driver development-MSDN Forums

How do I know how is Administrator and where should I put the password to?

My computer keeps asking for a password
I have 3 standard users on my computer & no one is assigned to be administrator
Cannot install updates because do not know or do not have a password
How do I know how is Administrator and where should I put the password to?

Hello

The manual installation of the operating system on the Microsoft Update Web site updates requires the Office of the operating system to run with administrative rights.

Please follow the steps mentioned below.

a. click the Start button.

(b) in the search box of start, type user accounts and click on user account.

c. click on Manage.

d. check which account is designated as administrator account.

Also check out the links below.

Why use a standard account instead of an administrator account?

http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account

What is an administrator account?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-an-administrator-account

Change the type of user account

http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

Install Windows updates

http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

Updates: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

How to enable and disable, copy or rename the rules via the groovy script?

A client, we received this question:

How to enable and disable, copy or rename the rules via the groovy script?

Foglight 5.7.5

Hello

There is this example of support KB

support.Software.Dell.com/.../99059

and there is also documentation of Service layer of the administration on the RuleService console.

Best regards

Golan

For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details". Some are not editable, and that's understandable. Click on next to any area classified as year, Genre, Publisher, etc. and the apply. No problems so far.

Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc. But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

It's fantastic!

But when you look into the details of any given file, none of these additional properties even are listed to be edited. Why offer to view these details, if you don't change them, or add them to different files? I must be missing something. I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

How to add and change these properties to files? Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

Any help would be greatly appreciated!

My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself. On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

For example, a ".jpg" file The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on. If you go into the properties on a .jpg file, you will see a lot of them and will be able to change. After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum). If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display. May take some time.

Compare that to the same picture saved to a file ".bmp". The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them. If the editable fields are directly related to the type of file that is displayed.

Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified. That's apparently what you see in the option «More...» ». So, in summary, the file type determines which fields are available for editing and posting.

HTH,

JW

Outlook Express broke down. With XP SP3 can get detailed instructions on how to uninstall and reinstall Outlook Express with the original disc?

Outlook Express broke down. With Windows XP SP3 can get detailed instructions on how to uninstall and reinstall Outlook with original disc?

OE gives an error message standard it is not correctly installed. Its a remnant message from OE4 and is false. You probably corruption with folders.dbx and you should remove it. See www.oehelp.com/OETips.aspx#7 then, after departures OE you must back up your messages and given the corruption, go to file | Identities and setup a new identity for you give a fresh message store and then you can use file | Import | Messages to bring them from the old identity.

Steve

How to install and activate Windows XP after the upgradation of hardware

I am using Windows XP SP3 and it is activated. I have the original and authentic installation CD
with the product key in my possession. I plan to upgrade my hardware by replacing the HARD drive, motherboard, CPU.
RAM and DVD player. Please inform how to install and activate the Windows XP to the new
material configuartion. At the present time, I have no intention to migrate to the Windows 7 operating system.

If you use OEM copy of windows XP, you will not be able to reactivate. When you change the motherboard, you need a new license.

How to download and install PDF pack all the

I am registered and paid but do not know how to download and install

Adobe PDF is an online service.

Please visit:https://helpx.adobe.com/document-cloud/help/using-pdfpack.html

I hope this helps.

Concerning

Megha Rawat

iPhone 7: how to charge and listen to music at the same time...

The new iPhone is great! But a quick question that I can't find the answer to... In the car, I use the TomTom app and listen to the music on my phone. Because it must be reloaded when I use TomTom, I have a cable for music and one for the load. The new iPhone means that I can't load and listen to music at the same time? Or will there be some accessory available?

Thank you!

You can read what is known on the Apple site.

Download Helper - how to download and save files .wmv WITHOUT the video being downloaded reading on screen?

Windows 7 Pro
Latest Version of Firefox
Latest Version of Download Helper
Windows Media Player and VLC are installed

When I download a video file (.wmv, usually) the video starts to play on the screen of the monitor prior to my being able to use Download Helper to download the video and save it on the hard drive. This generally translates the video stopping and playing and stopping the process of download because of the speed of download available. There is never any problem with the final download hard disk.

Today I installed the latest version of Firefox and Download Helper on another computer.
Windows 7
Latest Version of Firefox
Latest Version of Download Helper
Windows Media Player (not) is installed

Downloaded the same .wmv file you downloaded above and the video started to play on the screen of the monitor. Download Helper has allowed me to download the file on the disk hard WITHOUT constantly tuned to the video start/stop/start/stop etc.

Which option (in which program) would allow playback of the video to be turned on and off all by downloading the .wmv file?

Thank you.

Once the download has started, you can go to another web page. The
Download must be a separate function.

How to store and retrieve long values in the store persistent

Hello

In my application I want to store and retrieve long values in the persistent store that I used with Longvector and all is well, but LongVector is supported for operating system > = 4.6

I need to work my request in 4.5 also, can any one infrom me what are the other alternatives, I have to get my pls any abstract requirement...

Vector v = new Vector();
fill vector
Long premierElement = (Long) v.firstElement ();
myLong long = firstElement.longValue ();

How to launch and use "easy screenshot"?

I installed "Easy screenshot", but after installing it twice, I can't find a way to start the program. It was sponsored by mozilla if I though it would be the only one to use. A response would be appreciated.
Thank you!

Do you mean this one: https://addons.mozilla.org/firefox/addon/easyscreenshot/

What your Chinese? This article has a few screenshots showing what should look like the toolbar button: http://mozilla.com.cn/thread-230325-1-1.html

If this button does not appear, you can check for this among the available mode buttons customize. See: Customize Firefox commands, buttons, and toolbars.

How to take and print screen shot on Windows Professional

We will move forward to windows 8 in the spring. However, in the meantime, I need to know how to make it in professional Windows.

Thank you

Hello

Press the prt sc and then open an application such as WordPad (Start Menu, all programs, accessories), right click and paste the capture.

Kind regards

DP - K

How to take and post a screenshot on the HP Forum's Support.

Similar Questions

Maybe you are looking for