How to test the application with the size of the diff display to ensure effective operation on all devices?

Similar Questions

• How to test the switching PXI matrix

  Hello

  I have a PXI-2530 b and I was wondering is there an accepted practice to check the viability of relay out to just look at the number of relays?  I want to know if I've damaged a relay.  From what I read so far, I have to create my own connection matrix of switching to my PXI-4071 DMM test harness to check the status of network.   Is there another way.  NOR has considered adding a self-test for relay condition?

  Thanks for your quick response.

  I thought as well, but I wanted to be sure.  Even if I know that the reeds have a long service life, it is possible have to explode or cause damage.   And since there is no procedure for calibration to the switching matrix, I was wondering how to check that this component of the system is still usable.   We use the PXI system as a way to test and calibrate an internal pacemaker tester with 112 connections.  We partition the 2530 b in 5xBlocks, 1xBlock and 2xBlocks in independent mode and then using a custom internal test adapter to provide all interconnections.  The DMM and the multi-IO are distributed in these partitions.

  For this reason, I would recommend that future matrix systems have a rudimentary way to self-test the relays are less than 3 ohms (or all that apply regarding a particular switching matrix).   Pickering is advertising for cards supporting Birst.

• How to test the backlight of the Simulator

  Hello Guyz

  Im kind again in the development of blackberry so its more than a new hobby as I recently an interest in java.  So my first app is an attempt to make an application which the camera back given the fon. so I would like to know how to test, without the need to put it on my son, how do I know if d backlight is turned on or off, is the way to display the interface back to the Simulator or something. I'm using eclipse and the blackberry 9800 torch Simulator. How to test the light from my pc?

  Thanks for your time, im hoping a response. Take advantage of the UL

  You can't test the flash of the camera in the BlackBerry smartphone Simulator.  You will need to test this on a real Smartphone BlackBerry.

• How to test the domain controller security policy works or not?

  How to test the domain controller security policy works or not?

  So far, I put a security policy in the domain controller security policy, however, I do not affect client computers joined to the domain controller. and so far, if I apply the domain security policy work.

  LiuAlex

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• How to test the context menu bbui.js in ripple?

  IM using bbui.js v0.9.4 and ripple v0.9.10. How to test the context to the ripple manu? When I run the app on DevAlpha long press peek list context menu img, but how to do this in ripple?

  I managed to understand. You must click and hold on the edge/edge of the list of img to get the img to peep context menu. By clicking on the list of img don't peep the context menu.

• How to test the connection of the OID IT resource

  Hello
  
  I'm testing the connectivity of the OID IT in IOM resource. Could someone help me to know how to test the connectivity of the resource.
  
  Kind regards
  Nitin

  Then just go ahead and provide a resource, why are you running task scheduler

  Thank you
  Suren

• How to stop the side menu of Adobe ExportPDF running in all my software and the blocking of the screen?

  How to stop the side menu of Adobe ExportPDF running in all my software and the blocking of the screen?

  Hi B Faro,

  I'm not sure that I am. You are in Adobe Reader and see ExportPDF option in the tool pane on the right side of the application window? If this is the case, you can hide the toolbar by choosing View > show/hide > elements Toolbar > hide toolbars.

  Please let us know if that does not address your concern and provide more details about the problem you are having.

  Best,

  Sara

• How to access the tool feather in 13 elements Adobe? All I can find is the pencil.

  How to access the tool feather in 13 elements Adobe? All I can find is the pencil.

  Unfortunately, the pen tool is only in full Photoshop, not in any version of the EP. The closest is the text on the custom path tool, which has a kind of rudimentary pen tool to create the path where you want to place the text.

• How to test the app on BB10 2 phones with unique SIM without was anything!

  Howdy. I'm quite new to the BlackBerry Development (and especially new to BlackBerry phones), so I answered a few questions that I need. I had a Z30 for awhile (and I compiled/deployed some examples of applications that it), and I just bought a Q10 I can do 'real life' tests on smaller screens. I don't have a Micro SIM I want to switch between these phones (so I can choose my "daily driver"), but I am concerned about the effect of swapping phones will have a general user, both in terms of developer level.

  -If I put the SIM in my new Q10, it "lock" development on this phone, which prevents me to test on the Z30 or will I prevented from developing on the pins are different? My BlackBerry ID is linked to the PIN? How to acquire development chips do not work when swap you a SIM card between 2 phones?

  -How to replace the SIM card from another phone BB10 affects bought apps? I'll be able to install applications on both phones (and does it make a difference if only one of the two phones is turned on at the time)?

  -Do I need a BlackBerry ID for each phone, and if it is true, how will this affect the actual process of the build/deploy/debug?

  Basically, I want to be able to use a telephone for general use and test one or more applications on both phones, and I have no idea how all this works together (or does not) when several phones are at stake.

  The Z30 running 10.3.1 last build of the OTA and the Q10 runs the last 10.2.1 OTA build (10.3.1 soon?).

  I'll wait to complete the process of implementation on my Q10 until I hear something.

  Thanks in advance for any help you can provide me.  Thank you!

  Thank you very much!  I will give that a shot. (I may be a response to follow-up later - hang )

• [FAD] A few questions on the article of Timo "JDev: always test your application with the ApplicationModule Pooling disabled.

  Hallo Timo,

  I read your article JDev: always Test Your App with the regrouping of ApplicationModule turns off | JDev & amp; amp; ADF Goodies and I have some doubts.

  • I understand that you have disabled to AM pooling only to show the problem and the applications in production should always work with 'M bundling active. Right?
  • The substitution of activateState and passivateState functions must be performed when the AM is used to store data that is specific to the user. Right?
  • To store the data of the user in the AM, it is necessary to use the mechanisms of session? Or I might just add to the private variables AM (username, name, departmentName,...) to store the information of the user?
  • I see you used the Session instead of HTTPSession class to manage the session. What are the differences between these classes? Session the recommended class to use is?
  • Where can I find which are the main stages of the life of the session and functions to manipulate? 1-2 examples of creation, destruction, making the session which expires after e.g. 10 minutes of user'sinactivity... would be happy if possible.

  Thanks a lot a lot.

  Federico

  • I understand that you have disabled to AM pooling only to show the problem and the applications in production should always work with 'M bundling active. Right?

  Yes

  • The substitution of activateState and passivateState functions must be performed when the AM is used to store data that is specific to the user. Right?

  Given no, everything must be save in the activation/passivation. If you store something for use wide application and don't save during passivation, he went by activating the module application ID again.

  • To store the data of the user in the AM, it is necessary to use the mechanisms of session? Or I might just add to the private variables AM (username, name, departmentName,...) to store the information of the user?

  I like to keep the info in the plan to use session.

  • I see you used the Session instead of HTTPSession class to manage the session. What are the differences between these classes? Session the recommended class to use is?

  The session that you get from the module of the application is not a http session it's a server session. You cannot use any other class.

  • Where can I find which are the main stages of the life of the session and functions to manipulate? 1-2 examples of creation, destruction, making the session which expires after e.g. 10 minutes of user'sinactivity... would be happy if possible.

  The documentation is always a good starting point. The best description I know is from the book "Guide Oracle ADF developer real world ' by Jobinesh Purushothaman. If you google a bit you will find another description too. Don't know what you want to know about the creation and destruction of the sessions that you do yourself. To set the time-out setting for the http session, you can change the value of "session timeout" in the web xml file.

  Timo

• How to test the connection with a php file.

  public function processCreate (): void {}

  var urlVars:URLVariables = new URLVariables();

  var urlFileRequest:URLRequest = new URLRequest("php/controlpanel.php");

  urlFileRequest.method = URLRequestMethod.POST;

  urlFileRequest.data = urlVars;

  var php2Loader:URLLoader = new URLLoader();

  php2Loader.DataFormat = pouvez;

  php2Loader.addEventListener (Event.COMPLETE, showResult);

  urlVars.systemCall = "createprofile";

  urlVars.username = username.text;

  urlVars.password = password.text;

  php2Loader.load (phpFileRequest);

  }

  It's my feature on a .as file. I want to send username and password to php to create a new user profile in mySQL.

  I just copy and paste this code I can't harp what am I I, I want to do something simple, like track, but to test the connection between the flash and the php/controlpanel.php.

  Before we go over to adding codes I want to test whether 2 files are correctly connected, how do I do this, thannk you.

  The first thing you need to do is to test using a server supporting php and place this file in php on the server.

  The next thing you need to do is to resolve the variable name that allows you to agree with what your code specifies upstairs...

  php2Loader.load (urlFileRequest);

  Confirming or not the connection worked can be managed with everything that makes your showResult function.

• How to test the implementation on 9670

  How to test my BlackBerry 6.0 application that will look good on the screen 9670's 360 x 400?  I don't see how to configure the size of the screen of the Simulator.  (fledge.exe / Pocket = 9670 does not work)

  The application uses 6.0 features, so I can't just run it on a Simulator 5.0 with a screen 360 x 400.

  Thank you

  Zack

  You will need to download the BlackBerry Style 9670 Simulator.  You can download it here: http://na.blackberry.com/eng/developers/resources/simulators.jsp

• How to test the change of direction on the Simulator event?

  There is an example of change orientation Guide 0.92 development event.

  I add some codes for my application to deal with this event, but I don't know how to test it.

  I find that the return value of Accelerometer.isSupported on the device Simulator is true and simulator of funds, the value is false. But two of them cannot Simulator such an event.

  I know that you can test on IPhone simulator, use of change of direction "Command" + arrow keys.

  Can anyone help?

  Thank you.

  To test or change the orientation of the Simulator make sure that your using the last image of Simulator, then slide upward from the bottom right. (Not of the bezel, instead of part of the screen visible)

• Pro - M30, how to test the display driver?

  Hi all

  recently, I bought a new laptop, M30-961

  and before I bought it, I read the reviews on this model, everything is fine, but almost lukewarm writers about the graphics card GeForce FX Go5200
  and I want to test as the other driver display when come with a small application to test the Open GL and DirectX...

  could you help me?

  Your of

  Marwan Hamad

  Hi Solaih,

  If you want to test with DirectX, click Start > run > put dxdiag inside and OK.
  DirectX Diagnostic tool.

  Have fun!

• How to test the stability of the communication and to calculate ber using the CVI?

  Our Chief Engineer gave me a task yesterday. He asked me to make testing of software and to calculate the error rate binary we would like to know our stability of communication.

  However, I never touched this aspect of knowledge. I know a bit about the CVI and I want to write code with CVI bit error rate. So I could test the stability of the communication.

  But I don't know how to analyze and judge the receivers codes, whether they are good or bad.

  We use the Modbus communication protocol and receive data via a port series, so I want to back up all the data and record the total number of datas, marking as M.

  then, save the eligible data and save the number marking as N. Thus, the error rate is binary/m (M - N).

  If it's doable? Or you have a good idea. Thank you very much.

  unsigned char in_data[100]; 
  
   inqlen = GetInQLen (comport);
   for(i=0;i
  Above is my code that receives all the data I want to save the data [] array in_data and save the number.
  switch(inqlen)
  {
   case 19:
   {
     crc=usMBCRC16(in_data,inqlen );
     if((in_data[1] == 0x03)&&(crc==0)&&(in_data[0]==device_addr))
      {
  
      }
   }
  
  Above is the judgment of condition who receive eligible data which mark as N number.
  I know there is a prerequisite that I filter all the bad data. However, I don't know any good idea. I'd appreciate if someone could help me.
  Thank you very much.
  Best regards.
  xiepei