E540 Touchpad Government only right click, left click cannot

Similar Questions

• Nothing works, no icons, no bar tasks, do a right-click cannot ctrl-alt-del!

  I have no icons, no bar tasks, cannot do a right-click cannot ctrl-alt-del... Nothing works.  Computer turns on, the lights work... but nothing.  I have Norton via comcast too!  I use my computer laptop girls right now.  Any help would be greatly appreciated.

  Thanks :)

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Spectrum of HP: left and right click on the touchpad buttons behave oddly

  I just bought a spectrum ew HP laptop and the touchpad works well in most parts except for the left and right-click buttons.

  Just that they behave like primary and secondary clicks. I checked that they were set to be as such, but it still does not work.

  

  Anything I can do or is it a fault with the laptop itself?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Now lets go ahead and do the settings again for the buttons on the touch pad according to your needs

  

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Satellite L50-B-17J - how to turn left and made a right click of buttons?

  Hello

  could someone explain how to turn left and do a right click buttons at the bottom of my touchpad? I have Satellite L50-B-17J and just put in place, however I can't use the buttons on the touch pad. I have to click twice on the touch pad and also click and hold to move things. Also can't use right click on the files.

  Many thanks in advance, its really bugging me!

  Matt

  Hello

  Can you please tell us what OS you are using?
  Do you use the preinstalled original Win8.1 64-bit, that you got with your machine?

  I mean the factory settings, everything should work fine, and I guess you don't l t notice this issue from day one.
  At this point I just can you suggest checking the properties of the mouse (touchpad) and make sure that everything is set correctly.

• Equium P300 - Touchpad do right click works not

  Hi for the purchase of this laptop I had some problems with the touchpad - I installed driver newest says he works correctly but it is not.

  I can't use the right click button, and sometimes even the left one does not - it double-click on the button itself but the money buttons at the bottom of the touch pad seem to don't want do not work and sometimes you need the right click in the task you are undertaking.

  Any suggestion would be appreciated.

  Thank you

  Hello

  The touchpad works with a fresh operating system from Toshiba DVD recovery?
  I mean to find out if this problem may be related to the hardware or software problem.
  I've been reading about the touchpad problems after installation of the software or mouse driver
  So it would be very interesting to known if the touchpad issues and strange behavior also seems to be using a new, freshly reinstalled the operating system.

• P850 satellite - 02c - right click does not work while you touch the touchpad

  When using the touchpad on my new laptop, that the work of right click very well when I'm not moving the cursor
  However when I try to press on the right button with my thumb a finger on the touch pad as my index finger and he never enrolled as a left click.

  This seems like an intentional function so I hope one of you has a simple solution.

  Hello

  I think that you must disable the option called Momentum.
  This can be done within the parameters of the touchpad Synaptics (Control Panel-> mouse-> Synaptics tab-> settings button)

  Expand the option called score and remove the brand of Elk point.

• Synaptics - right-click interpreted as left click - T440s

  When I right click using the touch pad on my T440s, it fits like a left click. I reset all my Synaptics settings to their default values. I rolled back my Synaptics Pointing Device driver to the previous version, which is now 19.0.17.2. I restarted. The right click is still registered as a left click. Left click registered also as a left click, and I confirmed that I don't have the "Change primary and secondary buttons" option is selected. I'm perplexed as to what I can do next.

  Note: This has nothing to with a two-finger tap. Who does not either, but I'm talking about a physical depression of the widely maligned disaster and appropriately to a touchpad that came with the laptop (and has since been abandoned new features of Lenovo, thank God). I also fiddled with the Synaptics settings for 'Activate top button' and 'Enable button down', and it does not help.

  As a solution, I used AutoHotKey to map my right shift key to emulate a right click. This works, but is rather clumsy compared to a real right click. (Information on how to do it, in case you're curious: http://superuser.com/a/195168)

  This problem started while I was with a keyboard ThinkPad autonomous, plugged on the USB port of the laptop. When I work for a long time, I like to put my laptop on a stand, so the screen is directly in front of my face; This prevents the neck from bending forward to look at the screen of the laptop. I have a stand-alone ThinkPad keyboard that is on the table at a natural height for my wrists/hands.

  I am running Windows 10. But I had this problem once before, while running Windows 8.1, and the solution was then to restore the previous Synaptics driver. I suspect the specific version of the pilot had nothing to do with it, and if the cancellation has replaced some bad state. This time, however, roll back did not help.

  If I plug a separate USB, right-click on this device mouse works fine, which confirms that this is not a problem of Windows System. It's almost certainly a problem with Synaptics, which is also confirmed by the fact that roll back my driver Synaptics * fact * work the last time I had this problem.

  I should also mention that I had other problems Synaptics while my own ThinkPad keyboard is connected. I suspect that this is a configuration of Synaptics and Lenovo must test more extensively.

  My next step is to completely uninstall my Synaptics driver and hope that Windows drivers included for keyboard and pointer. Does anyone have a better solution? Obviously, I prefer the driver updates that avoid this problem in the first place.

  Uninstall and reinstall the driver Synaptics solved the problem.

  Steps to uninstall:

  -Open Device Manager (you can search in the start menu)

  -Expand "Mice and other pointing devices" (language of Windows 10)

  -Double-click on "Synaptics Pointing Device" to open its properties

  -Select the 'Driver' tab

  -Select "Uninstall" and follow the instructions, restart if necessary

  Steps to reinstall:

  -Open Device Manager

  -Expand "Mice and other pointing devices" (language of Windows 10)

  -Double-click on the element of mouse

  -Select the 'Driver' tab

  -Select 'Update Driver' and allow Windows to search for the appropriate driver

• Right click on my new Y50-70 touchpad no longer works

  For some strange reason, right click on the touchpad (lower right button) on my Lenovo Y50-70 has stopped working.

  Left click still works without any problem.

  An external USB mouse without any problems, as well, both left & right click.

  I'm having a hard time to believe that the (hardware) button itself was broken up. This laptop has been treated very gently.

  This would be a matter of adjustment?

  If so, how can I restore his features right click?

  Thank you.

  NSFW says:

  You have a momentum or Synaptics touchpad? Mine is momentum.

  Mine is Synaptics.

  

  UPDATE1: I just found a driver with a date of package a little bit later, but it has the same exact version number (17.0.14.81)

  http://support.Lenovo.com/us/en/downloads/ds100271

  Anyway, I'll download it and see what happens. I have nothing to lose.

  Update2: I double clicked on the 49tp02ww.exe (which has expanded worldwide in C:\drivers\Touchpad Driver (Synaptics, momentum, Alps)), then click to continue installation of the driver itself (same version as already installed! 17.0.14.81). In the end, it prompted me to reboot. I not a not restart, just tried right click of touchpad and lo & behold, it works.

  This isn't really a solution, because now reinstall the driver whenever the right click mysteriously disappears is more than a temporary workaround solution, not a solution, but I will accept it for the moment.

  Note: I didn't have to uninstall the existing driver at all.

  The mouse properties window is now different, if:

  

• HP dm4-1160us - cannot get the right click of the mouse using my touchpad

  Hi all

  I bought my HP dm4-1160us model yesterday of staples. When I use it for the first time, I found a strange problem with the touch pad. When I click right click button on the touchpad, I couldn't see the right display context menu, also same problem with both left click button. I couldn't choose any text while pressing the left button or...

  Anyone, please help me if you know the solution for this. I'm sure it's a configuration problem, but your ideas are very important to me...!

  see you soon

  KIRU

  Hello

  It's all DONE... I found the solution.

  The problem was due to the physical development of the touch pad. New song itself came with this incoherent design. When the side of the left and right buttons on the touchpad was not seated properly, instead he pulled little as in an oblique position. Don't know why, just made a hard push down on the side buttons of the touchpad today... which is it... suddenly I heard a noise like fit inside in the correct position and now my touchpad is flat...! I tried the left button and right click on... WOW... worked.

  I have almost given up for the use of left & right click on my touchpad, instead I started to use my mouse...

  Thank you...

• Context menus for both the left mouse and right-click

  I have a desktop HP Pavilion 500 with Windows 8. Installed in the first week of April 2014. I have a mouse wired HP supplied with my desktop computer. Last week, the two mouse clicks left & right to display the context menu. I did not any changes to the settings of the mouse. Any suggestions on how I can get this working properly again?

  Hello MBSola,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that a problem with your desktop PC HP Pavilion 500 where both left and right click are bring up the right click options and that he only started last week. I suggest you use the HP support document: use Microsoft System Restore (Windows 8), which will guide you through how to restore your computer to a point in time (a week or two ago) where the left click was working properly on your computer.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• Click right is left and left, to the right does not work?

  I went from the mouse keys functions because the right click was not working and now I can not access anything because the right click on the left button and left click on the opposite side does nothing and the touchpad is HELP back?
  Initially, I was trying to solve a problem of paste copy Grrr

  Hello

  What is the brand and model of the mouse?

  Method 1:
  You can unplug the mouse and re Plug and check:

  Method 2:
  I suggest also make sure that all drivers are up-to-date.
  You can even check the link mentioned to update the drivers below using windows and check updates.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows 7 64 bit - the mouse pointer doesn't move do not but the mouse is recognized and left/right click

  Problem:

  My mouse pointer is in the middle of the screen and will not go. If I have a left or right click, click on the system recognizes this, but does not respond to the mouse movement. My wacom tablet 's going to move the cursor.

  I've been running the system for 6 months. This problem occurred only 4 days ago. All other features are OK and unchanged.

  Solution attempts:

  I bought another USB mouse and it has the same problem.

  I also tried to reinstall the USB drivers as shown in the post of http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/20826bf8-996e-4622-96f5-09ab7a7d0b1f

  Hardware / software:

  • Generic PC with motherboard Gigabyte
  • Intel Core i7 with 12 GB
  • Windows 7 Professional 64 bit (active)
  • Razer mouse connected via a USB cable
  • Generic USB mouse is brand Legend

  Please let me know if you need more information

  Hi Ardeet,

  Two other things I would say.  First of all, have you been able to test your mouse on another machine to make sure it's working properly?

  Also, have you been to the website of the manufacturer of your computer to update the drivers for your machine and chipset?

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I right click, right-click menu opens, but is on the left side. How to make it right?

  When I right click on the menu, the menu bar drop-down click menu to open correctly, down to the right of the mouse pointer, but the problem I have is that where never otherwise I right-click such as office, for example, menu opens downwards and to the left of the mouse pointer. It is very annoying and I have found no way to change this. It worked very well upward until a week ago. I did not alter the settings by default and even tried the "reset default" option under settings of the mouse, but still did not set. Help, please!

  I found the answer to this, and here's how to solve this problem, if anyone else needs it. I think, in the last update, it changed side menu under the Tablet PC settings. Here's how to fix it:

  Click Start, type Tablet PC settings

  Click on the Tablet PC settings link from the start menu search results

  In the Tablet PC Settings dialog box, under handedness, selectleft-handed.

  When this option is selected, the context menus appear on your right, which is the default setting. The only exception is that when there is not enough real estate available on the right to display screen context menu, Windows displays the menu on the left hand side automatically.

• I can't left/right click on the icons on the desktop, the loading circle is always near my mouse... Help

  Here's the problem in my Windows 7 laptop.

  I can't left/right click on the icons to my office, and the loading circle is near my mouse forever! Please help me. I scanned with Windows Defender and nothing positive. Despite my problem, I can only run programs through the taskbar. I don't know what happened, please help me.
  EDIT: I can't even turned off my computer! Even after pressing the external button...

  Thanks if. I already tried another solution and worked.

• Improvements in computer laptop Touchpad or additional features (I want to just right click by tapping lightly on the button of the touchpad).

  I have Windows 7 running on HP Pavilion dv6t-3100 CTO Entertainment Notebook PC with Synaptics (version of the driver - 15.3.29.0).

  • For a normal click (left click) I either press the touchpad or press on the lower-left corner of the button - and for a click right, I press the bottom-right corner.
  • The unique tapping (left click) works when I tap anywhere on the touch-pad.
  I was wondering if there was some way if right click I can by simple sheet metal without pressing the button.

  May I know if there is any other soft-goods other than Synaptics which has some nice features.

  Thank you.

  Hello

  Thanks for posting the request in the Microsoft Community.

  Unfortunately, you will not be able to make a right click with a single touch. I suggest you to contact the manufacturer for assistance:

  http://h30434.www3.HP.com/