How to trigger the camera and light pulsed with PCIe-1427

Similar Questions

• How to record the screen and add audio with QuickTime?

  I can't wait to make my first video through QuickTime player, but I'm stuck on the following:

  (1) new screen recording - I'm able to capture the process of my video with this feature

  (2) audio new recovery - separately, I can record my audio

  But can't do the task above at the same time which means that I can save the process through and add my voice at once? Is this possible?

  Hello Vishal2014,

  I understand you are trying to create videos with recordings of screen as well as a voiceover. I can help you with that.

  Now, when you set up your registration form, you have the option to choose a microphone to talk and create video at the same time. This would reduce you adding the clip after the fact. Take a look at the first link below that will go on the way to do this.

  Save your screen
  https://help.Apple.com/QuickTimePlayerX/Mac/10.11/index.html?localePath=en.lproj #/ qtp97b08e666

  Now if you want to add audio to the video that you already created, consider using iMovie. You can import video, and during playback, you can save your audio files on top of the video. Take a look at the following article for more details on how to achieve this.

  iMovie (2013): add audio and music
  https://support.Apple.com/kb/PH14708

  Take care

• How to detect the relay ON / OFF state with PCI 6221 analog input card

  In order to test if a relay is ON / OFF using my card PCI 6221 DAQ devices and ports of HAVE it.  I conect of the relay contacts to an AO giving 5 v and the other contact to an AI in order to detect the corrent.  In addition to a bridge is necessary to close the circuit betweeb the AO and AI.

  Shoud this bridge conect the MASS of two ports?

  The plan is: relay - AO (5 v) - AO GND - GND AI - AI0 -.

  This does not work and gives a continuous corrent to 10 V (I think it is a saturated)

  Hint, please?

  The simplest connection is:

  • One side of the relay contact: + 5V PCI 6221
  
  
  • Other side of the relay contact: all DI PCI - 6221

  But I would add a DI (for example 10 k) resistance to GND of the PCI 6221. This will outline the entrance to GND when the relay contact is open.

• How to find the sequence and its associated with a particular schema tables

  Hello

  How can I get a list of all sequences and its tables related to a particular schema.

  Kind regards...

  ASIT K. reducing

  AsitK.Mohanty wrote:

  Hello

  How can I get a list of all sequences and its tables related to a particular schema.

  Kind regards...

  ASIT K. reducing

  What is the solution when the code that specifies the SEQUENCE does not exist or is in the database; for example when the code runs in the external application server?

• How to run LT2223z camera and microphone monitor?

  Hello
  USB download cable in my monitor Lenovo LT2223z (built-in speakers, camera and microphone) 'audio', 'video' download VGA cable. In addition, monitor has HDMI port (not using it) and two ports AUDIO-jack (do not use):
  1. "green" (helmet)
  2. "Rose" (MIC out)

  How to operate the camera and the microphone monitor?

  OH YES!... This is why I have heard the message of Windows upgrade my Windows 7 to Windows 10... After having upgraded the system automatically configure camera (just clicked, Windows' icon, then the next icon of "Skype")

  To run micro I right click on the 'speaker' icon, then "reading devices", then "LT2223z"monitor"icon.
  "Then record", then icon "microphone"... right click then "activate"... FACT!

  Thank you...

• I have a U135 DX netbook with a built-in webcam. How can I find the cam and I press these keys for easy access

  I have a U135 DX netbook with a built-in webcam. How can I find the cam and I press those keys for easier access please PS I'm not a manual.

  You can get a manual here.

  http://www.msi.com/product/NB/U135DX.HTML#/?DIV=manual

• HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA?

  I'M TRYING TO WORK WITH CHARACTER ANIMATION. I CHOSE THE MONSTER. I SEE MYSELF ON HER CANERA, I PUT RESET POSE AND THE MONSTER DO NOT MOVE WITH MY MOVEMENTS. HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA? Thank you

  Hi Luz... You have the track selected in the timeline panel puppet? You need to target the puppet that is controlled by the webcam/microphone/keyboard/mouse by selecting its track. That it arms for registration.

• The right way to face the camera and camera on standby?

  How one brings the camera back to life after the unit returns to standby mode?  What is the right way to manage the device sleep and wake?  Any help is appreciated.

  Hi Sucroid,

  I intend to produce a sample that shows this I hope that during the holiday season.

  Here is some information that can hopefully help you get started...

  When the screen goes to sleep, off camera equipment.  There is nothing you can do about it today, outside of the application one keep awake in your application window. (value SCREEN_PROPERTY_IDLE_MODE SCREEN_IDLE_MODE_KEEP_AWAKE).  Note that this won't save you a user who clicks the power button to force the unit in standby mode.  It will protect you against a situation where your application goes to background or another application requires video resources that are used by the camera.  In these two situations, your application will lose his viewfinder.

  But all is not lost!  There are some events of status, you can listen to that lets you know that the camera stops.  You can listen to these events either with an attached status_callback (applied when starting the viewfinder for example), or by authorizing explicitly state the events using camera_enable_status_event() and waiting for impulses of status.  All these things are detailed in the documentation for the API of photo here: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.camera.lib_ref/topic/overview.html

  The corresponding lights events are:

  CAMERA_STATUS_RESOURCENOTAVAIL - this event is logged every time that the camera is about to close.  If you have previously called camera_register_resource(), this is the event that listen to you to know that all your camera buffers are about to be démappés - so stop all logic that looks at them and then camera_deregister_resource() camm.  If you do not physically the buffers of viewfinder, then necessarily no need to use this registry/invert mechanism.  It's just there to provide warning and to activate the drivers of the device for you to recognize that it is safe to unamp wait for memory.  Each time the screen goes to sleep, the power button is pressed, or another application has need of resources of the camera, you will get this signal.  If you are curious to know the reason, you can check the 'extra' uint16_t argument in the callback of the situation for one of the camera_powerdownreason_t values.  All video recordings currently active or encodings auto-terminera when this signal is received.

  CAMERA_STATUS_POWERDOWN - event status is reported immediately after the hardware of the device is turned off.  You can't interact more with the camera until this condition is removed.  Note that to capture this event, you will need the user of the status of the event-mode (camera_enable_status_event()) interface, because any reminder of status you can have attached when starting the viewfinder will be cleaned up when the viewfinder stops.

  CAMERA_STATUS_POWERUP - event status is reported immediately after that camera material is fed up after having previously be put off.  Even not not on using status of event-mode interface (camera_enable_status_event()) applies in this case too.

  So, what can you do with this information?

  Well, tuned for CAMERA_STATUS_RESOURCENOTAVAIL will tell you when your viewfinder will close.  At this point, your application must enter a State where he is waiting for an event that will wake it again...

  In most cases, this is the event browser that indicates your application is active or foreground again (NAVIGATOR_WINDOW_ACTIVE or equivalent).

  So when your application is told by browser is it back to the foreground, you can then restart the viewfinder using camera_start_photo_viewfinder() or camera_start_video_viewfinder() according to the requirements of your application.  You will still need to follow the same recipe to start the viewfinder as a cold start your application (for example. Wait for the window of your viewfinder to be filled), but you will not need to reconfigure all the settings.

  OK... which covers 99% of the use cases that you will encounter.  Use case for the 1% remaining, you will need to follow for this CAMERA_STATUS_POWERUP event.  Why?  Well, there is a race condition when things down, in which case if the user wakes up the device while the camera is closing (eg. they struck twice in quick succession, the power button), then the camera will enter its off State, but navigator may actually not report your application it becomes idle.  This is because the infrastructure of power management is waiting actually for the material from the camera to the power off until the system goes to sleep.  If the user wakes up the device upward, then this action is canceled, and the unit enters never actually standby.  In this case of corner, navigator does not say your app to become active, again because he never told your application becomes idle.  So what are you doing?  Well, I have 2 suggestions:

  1. You can follow to CAMERA_STATUS_POWERUP using the event interface mode for the camera equipment.  It's actually the more correct approach and what we are doing internally with the BB10 camera App.
  2. You can use a timer to try to wake up the camera in the case of this corner case occurred.  for example. wait 5 seconds after the signal CAMERA_STATUS_RESOURCENOTAVAIL.  If your application has not been made inactive by browser, then you can try turning it back on the camera.

  I hope this help get you pointed in the right direction and still... I plan on collecting a best-practice appropriate sample that illustrates exactly how to do this when the weather!

  See you soon,.

  Sean

• How to use the camera layer.

  Hello, I use Adobe AE CS4 in my 32-bit of Windows XP computer.             I downloaded a few youtube tutorial and followed very closely and I have a project to make what is 95% complete. I'm stuck at the tool camera layer, I want the camera to follow every word of the philosophy that I have inserted in the project. Could someone tell me how, I did with the background, light, text, now the last would be the camera layer. How can I achieve that. Any help is greatly welcomed. Thank you.

  Just set keyframes for the camera and move it. You can set the values in the timeline panel or use different views to adjust the position of the camera. Please search the help files in the animation of a camera. We cannot give you much better than advice without knowing what tutorial you follow.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• How to test the audio and the video on Android

  How to test audio and video on Android?

  How it is checked when installing Skype on Android?

  What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

  (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

  Thank you.

  Sign in to your ID on Skype desktop and call your android phone to test

  It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

• Camileo S20 - How to display the date and time

  Hi, all. I got as Christmas present the Camileo S20, and I am not able to view the date and time in the video. In the manual is no reference on this subject, only how to set the date and time. But what is the intention to set the date and time in the camera, if it is not possible to display video?

  Hello

  Have you checked the user manual of your TV cam?

  If it of possible to display the data and the time you can find in your user manual how to do this. It always interesting to read ;) s

• Satellite A200-AH7 - how to get the camera program?

  I installed Windows 7 today and now the Chicony Webcam does not work. I've updated the drivers and the software for the Toshiba for Windows 7 download site, but nothing happens when I click on camera assistant. I tried to run the compatibility program, and he tells me that the program is not compatible even tought that the software is for Windows 7.

  Any ideas on how to get the camera to run program?

  Thank you
  Gary

  Sorry my mistake, the camera assistant was hidden.
  Of work.

  Post edited by: gary blainville

  > Sorry my mistake, the camera assistant was hidden.
  > Work.
  This means that your webcam working properly now?

  If so it of great and thanks for your comments! :)

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• How to trigger the dictation from the smart keyboard on the iPad pro.

  I use dictated on my iPhone and my iPad quite often.

  However on my new iPad Pro with the smart keyboard attached, I do not how to trigger the dictation from the keyboard.

  I don't see how to get the soft keyboard back to press the button of the microphone are there, such space suggested by some on this forum.

  This doesn't seem to work in the latest iOS Update 9.

  I would be fine with a hotkey, or have to invoke the keyboard of the shop, then press the button of the microphone, but I don't see how do either.

  When the Emoji button on the keyboard smart strike as the keyboard, the software keyboard emoji is displayed, the space but when I press the soft ABC capital but I cannot get to the regular keyboard with the microphone button.

  A possible alternative would be to use Siri to dictation trigger in recording a memo or another application, space but I didn't understand how to do this job either.

  Has anyone experience this problem and found a solution?

  Unfortunately I had to spend a good hour on the phone with technical support when they finally admit that it was an oversight by Apple.  I hope someone reads this post until they spend countless hours trying to understand something, but has no solution at the moment. Frustrated!