How to troubleshoot xp-> app win7 problem?

Similar Questions

• How do troubleshoot you a USB virtual COM port?

  Object

  Send orders of Labview to an Arduino board using the Advanced Serial write and Read.VI.

  The problem is that no orders are received by the Arduino.

  However, I can use the Serial Monitor built into the Arduino IDE to send commands to the Arduino and get the required result.

  I checked baud rate, the designation of COM port and the command is a simple as string 600,0.  The VI shows no error message.

  So, I'm looking for suggestions on how to troubleshoot a USB virtual COM port.

  Howard

  
  

• I visit my daughter and they have DSL but it so slow and Facebook does not completely load. How can I know what the problem is and fix it?

  I visit my daughter and they have DSL for the game but not a computer. I can connect to the internet with my laptop very well, but it is so slow and especially never finishes loading. Unable to get Facebook and Farmville to load correctly how to find what is the problem and ffix it? Its driving me crazy!

  Hi DonnaSuttles,

  ·         What operating system is installed on your computer?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the article mentioned for more information:

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Let us know the results.

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to recover my apps which are lacking in the start screen and access?

  Original title: Apps

  IN the start screen several pre-installed applications are missing, for example maps, news, weather, etc. When I want to re install through the store, I get the message that they are already installed. How do retrieve my apps and access?

  Thanks for your help

  Buri Ram, Hi

  Thanks for posting your question in the Microsoft Community.

  I understand you want to know how to get Windows apps like Maps, Weather, News etc on Start menu are missing. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall applications?

  2. don't remove you applications on the start menu?

  Follow the steps below to get the missing apps in the start screen and check the issue:

  a. press the Symbol of Windows and type one of the missing apps Ex name: cards.

  b. you might see maps in the top left corner, right-click on it and click PIN to start from the bottom task bar.

  c. check the missing applications in the home screen to see the Maps application; Get all missing apps in the same way.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• How to troubleshoot the plugin does not not in Acrobat

  Hi all

  I am just starting to develop my Plugin and I'm unable to troubleshooting / debugging.

  First of all, a bit of history:

  I start with a simple example, based on the example of BasicPlugIn that adds a menu item that displays a form of language c# .NET. I have the .NET extracted via a C++ wrapper shape.  I'll call the wrapper of the plug. At this point, the MyPlugInCommand method has a single line:

  CFW CoyoMenuFormsWrapper;

  This line is simply instantiated the exported class.

  If I DELETE this line and debug, everything is great. I touched my breakpoints and the menu item is displayed in Acrobat format.

  If I LEAVE this line and debug then nothing. No point of debugging, no menu item.

  I suspect this is a. Problem loading the DLL and I conducted depends.exe the and it showed nothing unusual. The exported dll that has the wrapper (Adobe2Net) is present and reported in detail.

  Acrobat records all errors that might give me a clue? I see nothing in the event logs or ProgramData. Any other suggestions on how to troubleshoot the loading has failed?

  Thank you

  Mark

  .

  Just followed this issue closely.

  I could get my plugin to work if the DLL in the folder plug_ins, but which was not possible for me. I opted to go down the road of COM Interop and it works very well.

  Thanks for the help.

  Mark

• Hi, 2nd try on the Coll CS6 Master not downloaded (at the location previous app) no problem, but when I opened a

  Hi, 2nd try on the Coll CS6 Master not downloaded (instead of pref app) no problem, but when I opened a n appl I get "your trial has expired. What should I do?

  There is nothing you can do. You misunderstand how it works. The tests only run once and that's it. Once you have exhausted your 30 days, there is no way to run a trial a second time on the same machine. You will need to buy the software if you want to continue using it.

  Mylenium

• How to remove ARDAgent.app error in osx 10.11.4

  How to remove ARDAgent.app error in osx 10.11.4?

  Hello

  You can ignore these messages. You can also usually ignore any message "ACL found but should not...» ». These messages can occur if you change the permissions on a file or a directory; they are accurate, but is generally not a cause for concern.

  Mac OS x: Messages to repair disk from disk utility permissions that you can safely ignore

• How can I add apps to my widgets?

  I don't have the same apps available in the widgets on my iPad, as I have on my iPhone. How can I add apps to widgets on my iPad?

  only way to get the widgets is an app that offer widgets

  I have a widget called public transport which came with google maps and if I remove this app the widget should be attended

• I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

  I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

  Return the iPhone 4 and buy an iPhone more later from model.

  The iPhone 4 does not support any version of iOS iOS 7.1.2 above.

• I can't access my Bank, Facebook or Twitter for weeks, how can I fix this annoying problem?

  This is ridiculous.
  I can't access my Bank, Facebook or Twitter for weeks with Firefox, how do I fix this annoying problem?
  I have to switch to another browser to access these SITES VERY COMMON?

  Hey Phillipp, your link to inspect which certificate has been the key to the solution for me. When I answered with the transmitter: Easy Tech, which reminded me of a program I loaded a long time ago.
  Of course, I deleted this program and everything is back to normal... it is of course with the exception of the years of bookmarks and other things that I lost trying to regenerate Firefox.
  Thanks for your help!

• How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  ISuspect that is not correct.

  Hello

  Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  The following steps can help to improve the accuracy of the estimates made by your watch:

  • Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
  • While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
    • Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
  • Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
    • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• How can I remove apps from my iPhone

  How can I remove apps from my iPhone 6 s?

  Hello

  Press and hold the app icon until all applications jiggle then press the X on the application you want to remove, and then press delete. Press the button at home once to stop jiggling apps.

• El Capitan and App Store problems

  El Capitan: App Store poster update available (for example the most recent iTunes update). It seems to be but then disappears from the two lists 'available' and 'installed '. This has happened too with a security update. Any ideas gratefully received!

  While holding down the option/alt key, click the  menu and select system information. When the report appears to look in the software section for the facilities. Updates show there? If so, can you control - click on the update and get an option Hide?

  Update App Store problems See Linc Davis response.

• How to use the apps to iTunes on macbook?

  How to use an app from iTunes on my macbook? (like snapchat) It worked for my friend, but he won´t works for me...

  iOS applications cannot be run on a computer.

  (142286)