How to turn iPhone off without loss of data

Similar Questions

• I need to remove my creative suite 5.5 old PC again. How can I do it without loss of my license?

  I need to remove my creative suite 5.5 old PC again. How can I do it without loss of my license?

  step by step please

  Thank you

  Michael

  Hello

  To turn off your product.

  > Make sure that your computer is connected to the Internet. Launch the app. Choose Help > deactivate.

  > Now on the new computer to install the product connect and enter your serial number

  To correct this information about Adobe activation and deactivation, see , Activation, deactivation. Adobe products.

  Hope that helps - assani

• How can I unlock my iPhone 4 without erasing the data? I know my password but its saying its wrong

  How can I unlock my iPhone 4 without erasing the data on it? I know what is my password, but it says its wrong. He lets me twice after continuous tent of the same password so I know it's the right password. There must be something wrong with the phone, but I don't know what.

  You cannot unlock the device without erasing it first (relocation of iOS).

• Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

  I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

  PC claims service pack1 cd with file asms

  When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

  Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
  Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
  Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
  Then copy the files over.
  This will probably lead to the best performance.

• How can I activate the rear touchscreen Tablet and mouse thing? I have no idea how I turned it off.

  Some how I turn off the touch pad/mouse thing and can't figure how to re-enable it. Please help me!

  Hello dolley:

  Thank you for your request.  I'm happy to help you!

  When the display it is more useful if you provide the model of your computer and what operating system you run.  I understand you accidentally turned off the Touchpad. and now want to allow it. I send you a link to a page for the touchpad. You will need to select your operating system, click here. You should also be able to turn on, follow these steps. Click the Start button, and then type in the mouse. Click on the mouse to open the on it, click on device settings. You should be able to enable and disable the touchpad here.

• After activating the magnifying glass, I find too intrusive but can't find how to turn it off. Help please

  How to get rid of intrusive magnifying glass activated once

  Hello

  Thid should help you.

  "How to turn on the Magnifier On or Off in Vista"

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  See you soon.

• Help! : How to install disks raid0 2x500Go of a XPS8300 in a XPS8500 (raid0 not configured) without loss of data?

  Hello world

  My XPS8300 has recently crashed due to the lightning (food), and I had to return to my insurance company who me repaid. So I have a new Dell XPS8500.

  I just kept the old XPS8300 two drives in raid0 because they were ok and I wanted to be able to recover my data.

  So I wonder if I can insert these two drives in raid0 in place of the original disc in my new XPS8500 which are not actually configured raid0 without risk of data loss. I know that this raid0 configuration store data on two disks that depends on the configuration of the original controller. This configuration was made by Dell on my old XPS8300 and I don't have it anymore.

  In order to access the drives of my XPS8500 and re-read my datas for more external copy, how can I get the exact settings for the configuration of the bios/raid0 in the XPS8500, probably the same as XPS8300?

  Any response would be appreciated.

  From what I see, the situation is this: you have a RAID 0 pair of hard drives of your computer that failed you believe still work.  Try to remember that Lightning does weird things to a computer, your drives maybe isn't as good as you think they are.  If they are still good, however, it is possible that they could work as a RAID 0 volume on your new XPS 8500.  Disks have RAID 0 metadata on them and the RAID controller on the 8500 XPS should be able to pick up. I don't think that the processors are very different between the two machines.

  You might have trouble booting from disks, however.  8500 XPS BIOS is a bit different from that of the XPS 8300, and I think that it is running Windows 8.  This OS requires parameters not available on the XPS 8300 that have to do with the firmware UEFI is used instead of the legacy PC BIOS.  If you simply install the readers and try to start, some parameters of UEFI would make no sense to the Windows 7 operating system which is most likely present on your old RAID 0 pair of disks.  Even if the system boots to RAID 0, there are enough differences between the mothers of the two systems to facilitate the difficult operation.

  If you still want to give it a go, I suggest that you keep the existing XPS 8500 system disk in place and plug the RAID 0 hard drives in the third and fourth SATA ports.  This will allow the RAID ROM show the RAID 0 volume as an extra disk and allow you to access the contents of this volume.  You may need to take possession of the folders and files on the RAID volume before you can copy, depending on the security settings you had on your XPS 8300.  In addition, you need to maybe change the SATA RAID controller setting and activate 3 and 4 SATA ports until readers discussed.  Older machines have sometimes RAID Autodetect/AHCI and an Auto setting to ports, but some of the newer computers are not.

  You might want to try the RAID setting before going to the trouble to install readers.  The RAID setting uses the AHCI, but he's also looking for RAID metadata on the hard drives.  If the reader of the XPS 8500 system does not, you could get a boot failure.  In case that you need to reinstall your Windows 8 operating system in RAID mode if you always want to try to mount your RAID drives.

• Microsoft Narrator starts automatically when paper; I can't understand how to turn it off.

  I need to turn off Microsoft Narrator from starting automatically when the connection. I can't fnd any configuration setting that will allow me to turn it off.

  Start - Control Panel - easy access, then click on make the computer easier
  See. Uncheck the box enable the narrator and turn on Magnifier. Click on the "Save" button
  then click on change administrative settings in the left pane, and then
  Apply all the settings of the
  Office logon.
   
   
   
  --
  ..
  --
  "tfdavenport" wrote in message news: b8e92a76-10 c 4-4ece-9d3d-e5580fddada4...
  > I have to turn off Microsoft Narrator from starting automatically when the connection.
  > I can't fnd any configuration setting that will allow me to turn it off.
   
   

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt

• Need to reinstall windows without loss of data

  Specifications of the PC:

  Model: HP Pavilion Notebook PC g7

  Operating system: Windows 8.1 Pro 64-Bit

  Processor: AMD A6 - 4400M 2.7 GHz APU

  When I upgraded from Windows 8 to 8.1, I got a popup saying that Windows 8 is not enabled. I looked everywhere in my PC (the physical computer itself and the digital information to the breast) as well as the box, he entered, entered every number I could find, and nothing has worked. Looking at my PC information, I realized I'm under Windows 8 Pro. This is not true! I'm supposed to have Home Premium. I want to know if there's a smart to find registry trick my series (nothing illegal) or how I might be able to restore the Home Premium without losing any data. If bad comes to worse, I can borrow an external HD work.

  Thank you

  -NB

  You must save the files before launching or Recovery disks or the hard disk partition.

• Dynamic form (goes and comes without loss of data!)

  Hey there!

  I am in a bit of a pickle... especially since I'm not very goot with AS2...

  Here's what I'm trying to do:

  http://www.isleekdesign.com/customtravel.swf

  It is essentially a shape with 6 pages that you can scroll backward, if you missed some information and want to go back for review.

  I think the concept is good, but I'm not sure how to actually run.

  Here is a screenshot of the timeline, so get you an idea of how I did it (but you probably know it already...):

  http://www.isleekdesign.com/timeline.jpg

  I did create a mask and shape scrolls... it going forward until that 45 frame, then it goes to the rear.

  For example, if we are on page 2 of 6 and retaliate, he plays the animation "backwards" and jumps to frame 1 (of course plays don't step back, but with a ' gotoAndStop (1) '; command).

  The problem is that if I fill, say that all of the information on page 1 of 6 and then scroll down... when I come back to this page, the info is lost.

  Here's what the form looks like:

  http://www.isleekdesign.com/Scene1.jpg

  I have named each text entry and checkbock accordingly, but am not sure how to get the input data actually stick to each field so that the "coming and going" actually works...

  Any ideas on how to achieve this? The next step is to send the form to a php script... But first things first

  My * guess * is that a script should be added when I hit the "next" button, so that it sticks the field values (what the user has typed) in each field and stays there. This will also help collect information of each page for when it is ready to be sent.

  Thank you in advance to anyone who can help me. I'm ready to download the .fla is necessary.

  Kind regards

  iSleek

  Save all data (in variables), before leave you a page.

  for example, create your instance of loadvars to send when you initialize your app (before you get on the pages of form):

  var sendLV:LoadVars = new LoadVars();  Initialize, so it is not crushed.  You may even need:

  {if(!sendLV)}

  var sendLV:LoadVars = new LoadVars();

  }

  Then, before leaving a page, wrap through all your textfields and record the input data to sendLV:

  sendLV.name = nameTF.text;

  sendLV.address = addressTF.text;

  .

  .

  .

  etc.

  When you enter a loop of the form through your textfields page again to see if all the data was stored:

  {if(sendLV.Name!=undefined)}

  nameTF.text = sendLV.name;

  }

  {if(sendLV.Address!=undefined)}

  addressTF.text = sendLV.address;

  }

  .

  .

  .

  etc.

  not only this will prevent loss of data among users of flash and frustrating, but you will be all set to call your script php with your populated loadvars.

• ESXi 4 re - install without loss of data on data warehouses separated, local

  I have an ESXi 4 installation home with 3 SATA drives installed with 3 data stores.

  1 data store is empty and is on the disc used to install ESXi (I intend to format this drive and re - install ESXi)

  My question is now: I would be able to "import" the other two stores of data on the new installation without losing my data? My VMs are located on two other data stores, and all my data is also located here...

  ESX will see and ask if you want to maintain or format.

  StarWind Software R & D

• Always on USB, how to turn it off

  This was asked before but without definitive answer. Could someone Acer please answer. Is it possible to disable the "Always on" function USB? That's when a mouse USB or another USB device is still powered by the battery even when the computer is completely turned off. If it is possible, how? If its ' is not possible, this function please maybe toggable in future laptops from Acer or obtained through a firmware update.

  Computer is Acer S7-392, but suspect that this affects several other models as well.

  Thank you

  Alain

  See if you have any way to disable in Charge USB Manager:

  http://Acer.custhelp.com/app/answers/detail/A_ID/29968/~/USB-charge-Manager

  .

• Fact ' slide to power on "drain the battery? / How to turn it off.

  Just, I got my W520 and noticed that the fingerprint sensor has failed in this setting (after I turn off the led is lit green). How fast did it drain the battery? It is an interesting possibility, but at least I can connect to the password of the bios is nothing more than a gimick I can say.

  -FDP

  No need to go into bios. Open "Thinkvantage fingerprint software"-> settings-> authentication (first tab), under the "safety walk", uncheck the "footprint user digital instead of the power button

• start sound and close sound-how doi turn then off?

  I have windows XP Home edition and I would like to turn off the sound that occurs when I start my computer and when I stopped him.  If you know how to do it please respond with directions

  Google searches have concluded that quite easily...

  http://www.askdavetaylor.com/how_do_i_disable_my_windows_startup_sound.html <- probably="" the="" one="" that="" will="" make="" the="" most="">

  http://KB.IU.edu/data/ajgs.html

  http://www.YouTube.com/watch?v=BCbnvj-PiW8

  http://www.YouTube.com/watch?v=tMZwh71Bycc