How to UN Manual/Auto-Clenup, use the data store

Similar Questions

• How can I add an ISO to the data store?

  How can I add an ISO to the data store?  It doesn't let me access the ISO.

  of the error, it seems that your iso is bad.

  hitting a md5 checksum or re-download the iso

• Detach a lun using the data store name?

  All (or Luc lol)

  I am wanting to use the disc to detach function, but instead of passing naa.id, I wish I could pass the name of a data store already disassembled data store to get the id of the naa. I would also like to pass a list of hosts, rather than to all guests who tied it.  I watched Alan functions but its going to each host rather than being able to move from a specific host.

  I took a slap at him earlier, but I'm a little confused on how to do it.

  http://www.lucd.info/2011/11/25/LUN-juggling-in-vSphere-5/

  Any help?

  With a small change to the functions of Alan, you can use a parameter of VMHost.

  In there, you specify one or more ESXi servers where the data store must be dismounted and detached.

• How to move a rule definition with the data store for esx alarm without re-creating the rule?

  Hi, I would spend my rule of definition of alarm of the data at the level of esx store, without re-creating the rule. Is this possible?

  In the Act, I don't want no definition of the alarm at the data store level. So, what is the best practice?

  
  
  Best regards

  It is currently not possible.  The rules are hierarchical, and there is no way to stop the inheritance, or move messages.  You will have to re-create them at the appropriate level.

  -KjB

  VMware vExpert

• Maintenance of the data store: umount CF datastore?

  Hello.

  We have a cluster of ESX (vSphere 4) with several warehouses (NFS and Fibre Channel) accessible from all ESX hosts and want to perform maintenance on one of the CF data stores. We do not want to stop all the ESX Cluster, since some of the VMS are in production use. Thus, one of the ESX hosts must be running during maintenance of the data store, with the VMs in storage migrated to a NFS data store to market.

  So far, it's simple: VMotion and Storage VMotion can be used to achieve a situation where all important machines are on the good ESX host, with their storage on the NFS datastore. The ESX host with virtual machines without importance will be stopped (after their virtual machines, of course).

  The crucial question is: How can we we safely power down the data store FC for maintenance? We have to somehow disconnect, umount, or cancel the configuration of the data store CF on the ESX host running? Or is it just to turn off the CF data store?

  Concerning

  Dominik

  This is a VMware KB detailed maintenance with unpresenting a LUN from a host - http://kb.vmware.com/kb/1015084 local put bare (using esxcli) host is necessary otherwise you will have a few interesting emails in your vmkernel logs

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Moving the data store files

  Hello
  
  It's on 11.2.2.4.1
  
  If I move my data store files (ds0, ds1, etc.) to a new location, is there a way to get TimesTen use from the new location?
  
  I tried moving them and update the sys.odbc.ini but get * 10003: unexpected database file exist for new data store * which I suppose is because the TT daemon keeps a record of location of data of the DSN file, as seen in ttStatus.
  
  I have to go through a route of backup/restore (http://docs.oracle.com/cd/E18283_01/timesten.112/e13063/upgrade.htm) to move data files a data store?
  
  Thank you.

  Yes, if you want to re - locate the control point files or transaction logs you must proceed as follows:

  1 stop all activities demand etc. on the data store.

  2. make a full backup using ttBackup.

  3. remove the data of the memory store.

  4. destroy the datastore usign ttDestroy.

  5. change the Datastore or LogDir attributes in sys.odbc.ini to point to the new locations.

  6. restore the backup data store using ttRestore

  7. you can now start and use the data store.

  It is the change of safely / supported only the location of the files in the data store.

  Chris

• Copying files to the data store

  I use the server ESXI 4.0 and a few Linux VM running. I would like to ask if there is a way to copy any file to any directory VM on the host main data store. If there is a way could someone please suggest some tips.

  You can use the data store browser (right-click on the icon for the data store).

  Or VMware Converter.

  Or enable SSH and SCP or FastSCP.

  André

• How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page

  I just noticed that (in comparison to Internet Explorer): in IE, when you preferred a Web page, it uses the actual name of the Web page (for example, for this page, it would be "Ask a Question Firefox Help" as the name of the bookmark), but in Mozilla, it uses the URL as the name of the bookmark. I was wondering if it was possible to change my Mozilla settings so that it uses the name of the Web page as the bookmark name instead of the URL? I hope that everyone understands what I am getting? If anyone can help me, I would really appreciate it. Thank you.

  Firefox uses the tag title for the name of the newly saved bookmark.

  When I bookmark on this forum page I get this for the 'name' of the bookmark.

  How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page | Firefox Support Forum | Firefox help

• 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

  How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

  can you please email me at [removed personal information]

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

  How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
  My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
  Thank you.

  Try this new extension - turn off private browsing:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

  Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

  Richie just needs to get to the function disable compensation no browsing history, who works at.

• I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

  I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

  option of command, escape on the keyboard and then on the force quit button for all applications listed

  then empty the trash

• Can I use my printer manually instead of using the wireless connection?

  Can I use my printer manually instead of using the wireless connection?

  cbg_37 wrote:
  

  It is an OfficeJet Pro 8610.

  Hello

  It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:

  

  Kind regards.

• How to rename a directory by using the command prompt

  How can I rename a directory using the command prompt?  Say I want to change c:\Users\User c:\users\user utilisateur\Mes Documents documents.  How can I do this?

  I looked in Google.  Here's what I found.

  G:\data>mkdir dir1
  G:\data>dir /b
  dir1
  G:\data>rename dir1 dir2
  G:\data>dir /b
  dir2
  G:\data>What would I write for the data? And what would I write for b?
  

  C:\docs>ren c:\docs\1.txt 2.txt
  C:\docs>dir /b
  2.txtPlease give me an example.Rod Computer
  

  OK, I fixed it.  I did go in safe mode, go to documents, right-click on the file, select Properties, security, advanced, owner and change the owner.  And that's all.

  They don't call me computer Rod for nothing!

  Thank you

• URG: How can I force APEX to use the specific schema: spaces of work APEX_040100 or entitled to another schema?

  Hi all

  Here's the scenario:

  1. My computer crashed. were to return to complete export (expdp 11.2.x to impdp 12 c). successfully done.
  2. Configured ADR blah blah... can access the admin of the apex.
  3. Problem is: administration interface does not SEE my workspaces apex Apex (only the workspace IN-HOUSE).
  4. After investigation it seems that APEX (after the upgrade) is somehow configured / run with: schema APEX_040200 and not

  APEX_040100 (as I have improved Apex in the old database versions).

  
  

  5. If I'm running the following:

  ALTER session set current_schema = APEX_040100;

  Select short_name, display_name

  of wwv_flow_companies

  where source_identifier is not null;

  
  

  I SEE all my beloved workspaces.

  6 my questions:

  a. How can I force APEX to use the specific schema: APEX_040100 instead of APEX_040200?

  b. or are there other alternatives to assign these workspaces in the current environment?

  
  

  Concerning

  Etay G
  

  Hello Brad,

  Thank you for your response. Appreciated.

  • You are right. Indeed, this should be the correct answer:
    • I forgot to mentioned I tried this (before the procedure below):
    • (https://docs.oracle.com/cd/E59726_01/install.50/e39144/trouble.htm#BABCBEAD)
  • Yet, as I had a little corrupted environment Apex after import (impdp), COMPREHENSIVE database this method of revocation (above) has failed several times to me.
  • What solved my problem was is mentioned here: https://community.oracle.com/thread/2565074?start=0&tstart=0
  • Here's what I have (solves the problem):
  • Deleted APEX_040200 Apex 4.2 installation().
  • Text left in DB is the only APEX_040100
  • Then, the version 5.0.3 and it worked!
  
  More importantly, after the installation of APEX, all workspaces, users, etc. are automatically correctly resided in APEX.
  • I think that if you have only 1 version of apex corrupted in DB. It should work as well. Remove again, schema using the above script (check version) with caution (after backup, etc.).

  Kind regards

  Etay G