How to update 2 for 4.1 vSphere vcenter server?

Similar Questions

• (3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  The following error message appears in my events of vCenter server every minute or so:

  "(3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  I have a license of vCenter Server Foundation (4.0) with three hosts. I am aware that this license only supports three hosts. Why vCenter should log an error every minute to tell me that? Can I have it also ignored it clutter visually the events list?

  And to meet me once again, VMware has just contacted me and he was recorded as a bug and will be fixed in update 1 when coming out.

• How can I get the VM of vSphere vCenter?

  I use vSphere 6.0 Update 1 b, and PowerCLI 6.0 Update 2

  I need to move my VM vCenter to a new data store.  The only thing I don't know is the name of the vCenter VM VM (this may change).

  I have the VI server object for my vCenter Server, which is returned from the connect-VIServer cmdlet

  Is there a way I can use the VI server object to get the VM vCenter, or is it possible to ask all virtual machines which is a vCenter?

  Appreciate any guidance.

  Maureen

  Thanks for the help, that's what I did.

  $vctObj = to connect-viServer $vctIPAddress

  $vmList = get-vm-Server $vctObj

  $vctVMObj = $vmList | {When | $_.guest.} {IPAddress-match $vctObj.Name}

  Thanks for the help.

• How can I safely expand the vdisk my vCenter server located on?

  Hey all, I'm a fairly recent convert to VMware and I really like what it has to offer. I'm still learning about it even after my class a week about a month ago. My current dilemma is that my vCenter server is a virtual machine sitting on a 120 GB vdisk but when I go to the summary page for this virtual machine storage usage is 124,17 GB. I was going to close vCenter and vSphere Client software to increase the size of the disk, but I was afraid that that affect my running virtual machines? I tried Googling and couldn't find anything definitive either way. So, can I safely stop vCenter and increase its size to drive this way? If this is not the case, what is the best way to increase the size of the disk?

  Thank you

  Joe B

  Assuming that it is a virtual Windows machine (vCenter Server is also available as a Linux-based appliance) you don't need to shut down the guest operating system. Just resize the virtual disk of the virtual machine in the virtual machine settings and then increase the size of the partition in the disk of the guest Manager.

  BTW. used 124 GB drive space intended to trade files of the virtual machine, and a few configuration files.

  André

• How to update BIOS for Portege 7200

  Is someone out there to have a procedure to update the bios of a Portege 7200CT without the docking station.

  Toshiba posted a procedure in its newsletter, but it does not explain how to do the update without the docking station. As everyone knows that the Portege 7200CT has his floppy drive on the docking station and if we follow the Toshiba update the procedure to disconnect the laptop, so how do we proceed with the update if the update software requires a floppy drive that is enabled by default on the drive has :

  Hope someone out there has something to share!

  Hello

  I looked on the Toshiba site and there is no update the BIOS of your laptop. You have problems with your Portege?

• Where are the instructions for the upgrade to vCenter Server Appliance 5.0.0 updated 1 b to vCenter Server Appliance 5.1?

  I looked through the release notes and could not find an answer for this... the current ASB does not see the updates available to perform this move on the current instance of VSA... someone at - there more information on this?

  Check out http://kb.vmware.com/kb/2033990

• Planning for removal capacity physical vCenter Server 5

  We currently have a vCenter / ESXi 5 environment that hosts all our end test development servers. We have 4 ESXi servers running on the servers, Proliant DL 380 G7 with 144 GB of RAM each, 8 NETWORK ports and processors Intel core 2 x 6 on each server ESXi. This all the hooks in a HP P2000 SAN with 7 TB of space. We plan to move production of 7-8 servers in this environment, for the most part, SQL 2008 / Win 2008 R2 servers. I want to do a capacity planning and am looking for a tool that will calculate the virtual needs for my physical servers. I see the VMware Capacity Planner, but it seems that it is for capacity planning for existing VMware environments. I want to the capacity plan for my physical servers and anticipate the small jets I need resources, if I move to the virtual environment. I think I need to expand the virtual environment, but I want to know how much.

  I think that Capacity Planner, it's exactly what you're looking for.

  http://www.VMware.com/products/capacity-planner/

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• How many updates required to turn light Hall v. 5.2 up to v. 5.7.1? I downloaded 118 so far!

  How many updates required for v. 5.2 up to v. 5.7.1 Lightroom? I downloaded 118 so far!

  Thank you, Bill

  Uninstall your current lr5 and install the latest version of the lr5 (5.7.1) directly:

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Support for multiple instances of vSphere vCenter

  I installed the demo of (construction 4.4.0 - EE #1509 - July 28, 2010 - Release Build) Hyperic 4.4 company Web site to test the support of monitoring VMware vSphere 4.0.
  
  I have installed an agent Win32 on W2003 server which hosts the 4.0U2 of vSphere vCenter server and configured it. Once resources have been configured, I edited the VMware vCenter resource to add a user/password valid and after a short while the ESXi host servers and virtual machines appeared in the vSphere browse/HQ screen. Everything works well.
  
  I then tried to add a different vCenter server with its own ESXi host servers (with a new agent installed on W2003 this server) and that's where the problem starts. After that I added the name of user and password in the detail of the vCenter inventory, new ESXi and VM guests begin to appear under "recently added". When I go to the screen of vSphere browse/HQ original vCenter disappeared and a mixture of the other vCenter servers host and its own host servers appear under the vCenter newly added.
  
  I would be able to monitor the 2 different vCenter servers?

  Multiple vcenter instances are supported.  When you configure the resource, be sure to use the IP address of the box instead of the default loop address.  When HQ sees multiple vcenters air-conditioned and come with 127.0.0.1 in the URL of SDK, it blends.  Configuring IP should solve the problem you are experiencing.

• I need some help please (I can not log in via customer web Vsphere Vcenter)

  Dear professionals

  as you can see in the photos attached, I can not connect on the web client via Vsphere vcenter server.

  should I use same ([email protected]) username and password that I used for SSO?

  I don't know exactly what username and password should I use.

  Please help me because I blocked at this point.

  Thank you very much

  naoufl

  Hello

  I can see on the screenshot that you misspelled the username administrator as Administratore, how ever the default Super powers are

  username: [email protected]

  Paswweord: master password of the SSO.

  Thank you

  Avinash

• How can upgrade the extensions of vcenter Server version 5.0.0.16964

  I upgraded vCenter Server 4.1 to version 5.0, but a message box has been invited during the process of upgrading to vCenter which is attached with this post. Please help how can install extensions to upgrade version of vCenter server 5.0.0.16964.

  Use the vSphere client (when it is connected to the vCenter Server 5) and check plugins/extensions you installed here: Menu "Plugins / manage plugins.

  You must update the plugin Manager Update to the new version. If everything else is enabled and work so no more away from updates are required.

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• Saving a vCenter Server in vSphere Client Web (5.5)

  Hello

  I was wondering if it is possible to save multiple vCenter servers (all vCenter Server devices) with a single instance of vSphere Web Client that runs on one of these devices to vCenter?

  VCSA1 > use built in Web Client to manage all vCenter servers.

  VCSA2 > register with VCSA1.

  VCSA3 > register with VCSA1.

  I find no 5.5 specific information but what I've read I think it's possible on 5.1. The ' admin - cmd.sh' script does not seem to be present in my 5.5 VCSA however.

  VSphere Documentation Centre

  The Server system, a device to vCenter Server vCenter is pre-recorded with the vSphere Client Web inside the unit. To register for another system of vCenter Server with the vSphere Client Web installed as part of a vCenter Server Appliance, you must use the admin-app script from the command line rather than the Web-based administration tool.

  vCenter Infrastructure Navigator 5.7 Documentation Center

  /usr/lib/VMware-vSphere-client/scripts/Admin-cmd.sh register https://WebClient.mydomain.com:9443 / vsphere client Director of VC.mydomain.com 'CENSORSHIP'

  Thanks for any help.

  The admin app is no longer available with vCenter 5.5. If you register all the vCSA to a SSo central, they will all see the place in the web client unique management this SSO Server vCenter.

• Someone at - it get the update of 5.1u1 to the vcenter service device to work?

  Hi people:

  I tried to update the server vcenter 5 hardware. 1 b to 5.1u1, and the update will fail.  The log (/ opt/vmware/var/log/vami/updatecli.log) is full of errors like the one following that simply keep repeating:

  

  I tried to do the update as well via a Web download and downloading the iso file and applying from there.  Same result both times.  Had to go back to the snapshot before the upgrade.   Anyone has any success applied this update?

  Seems to be a known problem: https://www.vmware.com/support/vsphere5/doc/vsphere-vcenter-server-51u1-release-notes.html#upgradeissues

  VCenter Server Appliance 5.1.x to vCenter Server Appliance 5.1 update update 1 stops at web interface user while showing the status of update installation of updates *.
  When you try to upgrade to vCenter Server Appliance 5.1.x to vCenter Server Appliance 5.1 update 1, the update process stops an hour and the status of update to the user Web interface shows as installation of updates. However, subsequently, the update is properly an hour.

  Workaround: No.