How to use a FMS server

Similar Questions

• How to use the second server virtual router?

  Hey guys. I have a basic configuration to the House. ISP-ISP-router and my host pc. I want to be able to separate my virtual network on my home network. I have a second cisco router (WRT320N). I also have two network cards integrated with my motherboard. Now, is it possible to use the secondary router for my virtual server for my test environment?

  So far, I connected the external port of the ISP router on the internal port of the router Cisco-for the basic configuration. I guess, I need to connect the secondary of my host network adapter to the router cisco-but then, I do not know how to configure vmware to use secondary nic as NIC default.

  Any help is appreciated.

  Thank you

  Right, I found the solution, but I thought I'd share it for people who do not know.

  Router installation as follows:

  ISP-router to Host (NIC_1) to the host (192.168.0.1) connectivity

  ISP-router-Cisco-router (Internet Port) (192.168.1.1)

  MUST be on different subnets

  Cisco-router to Host (NIC_2) (in the NIC_2 adapter properties, all checkboxes except VMware Bridge Protocol MUST be deselected HOST, so please use NIC_2)

  VMware, Virtual Network Editor, full of connection Type must be selected as MANUAL that points to your NIC_2

  AND

  the parameters of the Virtual Machine to the network card, ' Custom: specific Virtual Network ' should point to NIC_2.

  This will allow you to use your second NETWORK card for your virtual machine (but the MAC address will be assigned by VMware... does cause no problem at all)

  Your virtual, in my case, Windows Server 2008 R2 operating system, will be no connectivity until you assign a static TCP/IPv4 address.

  This will isolate your virtual network on your home network.

  I hope this helps the other.

• How to use a time server to build a clock in flash?

  Hello.

  I see a lot of cool clocks done in flash, but they charge the time based on the date and time of your machine. I want to build a clock that takes the time to an official time server so that it will always be up-to-date.

  The problem is I don't know how to do this and I can't find anything about it.

  Someone at - it indexes?

  Thank you very much.

  you will need to find an official clock that has an RSS feed, create a script server to load this power and send to your swf file after your swf calls the script.  You can then analyze the flow in your swf file and use it to display the clock that you created.

• which cluster service and how we use them in server 2003 sp 2 and 2008

  Hello

  I want to know about cluster service, which is to use a Server 2003 sp - 2 and Server 2008 why we use

  Thank you
  Kind regards
  Patrice Hiren

  Please transfer your inquiry in the most appropriate in the Windows Server Forum.  Thank you!

• How to use 2 AAA server to different connection end

  Hello, could you help me?

  It is a part of my setup; I would add another RADIUS server, witch should take care of the telnet at vty 0 4.

  10,20,30,40 RADIUS server supports virtual access, and I have another RADIUS server which takes care of to connect to our network equipment.

  ! Cisco 7204 with system flash c7200-io3s56i - mz.121 - 4.bin

  !

  AAA new-model

  AAA authentication login default group Ganymede +.

  enable AAA authentication login no_tacacs

  AAA authentication ppp default group Ganymede +.

  AAA authorization exec default group Ganymede +.

  AAA authorization network default group Ganymede +.

  AAA accounting exec default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  !

  virtual-virtual-model profile 1

  virtual - profile aaa

  !

  interface Serial2/0:15

  ISDN30 description

  no ip address

  encapsulation ppp

  no ip route cache

  No keepalive

  Dialer pool-Member 10

  primary-net5 ISDN switch type

  first request ISDN tei negotiation

  XXXXXXX calling ISDN

  no fair queue

  compress the stac

  No cdp enable

  Chap PPP authentication protocol

  multilink PPP Panel

  !

  interface virtual-Template1

  IP unnumbered FastEthernet1/0

  NAT outside IP

  Chap PPP authentication protocol

  !

  host key 10,20,30,40 radius-server *.

  !

  Line con 0

  exec-timeout 20 0

  password *.

  connection of authentication no_tacacs

  transport of entry no

  FlowControl hardware

  line to 0

  line vty 0 4

  access-class 1

  exec-timeout 60 0

  password *.

  connection of authentication no_tacacs

  transport telnet entry

  telnet output transport

  If I just add

  AAA authentication login vtymethod group Ganymede + activate

  10.50.60.70 host key radius-server *.

  line vty 0 4

  connection of authentication vtymethod

  My telnet request 10,20,30,40 and I refused! Could help you make a secure solution?

  Thank you

  Jens

  I think that your solution would be to set up a group of different RADIUS servers with the new server of the new group and use the new group to authenticate your vty. The config might look like this:

  AAA server Ganymede group + vty_TAC

  Server 10.50.60.70

  enable AAA authentication login vtymethod group vty_TAC

  10.50.60.70 host key radius-server *.

  I set up this kind of thing and it worked fine. When I set it up I have explicitly configured (so named) two different RADIUS server groups and referenced groups of specific servers for each authentication method. I did not understand if it works to keep the default group Ganymede + and use it for your authentication normal or if you may need to configure a default group for this.

  Try it and tell us what is happening.

  HTH

  Rick

• How to use the test server.

  I have my website concretestairslondon.co.uk and I want to redesign this website; However, I still want the old one as it is until my new is ready.

  I have another domain and hosting and I would test this site I am building. I'll stop the crawlers to the site via htaccess so I don't get penalized for content duplicate.

  I like the feature to automatically download to the server via save with Dreamweaver, but I'm afraid it will download to the remote server. What is the way to download only to a remote server when the site is fully completed and tests are completed?

  In fact, you can have all the servers defined in the site definition, but DW use only those that you have enabled by checking either FTP or TESTS. In this case, let them all off except for the testing server.

• AS3 via an Fms Server

  This is a mutual question as3 and fms, I'm not sure - an experienced user can help in this forum, but...

  In my flv file, I have 500 hundred videos of small size (20 seconds if - 0,80 MB wise bytes) in the library. In a test, randomly tese Inc. 6 come out on the screen and since this is a test, if you choose the correct video, the next question (another 6 videos randomly come and so on...)

  I have 2 questions here

  1. my swf works well with 20 videos (flv playback) in the library, but when I filled the library with 500 of them, is there a problem of size possible because of the ability of libraray (I think that the scene is not a problem because only 6 videos are available on the scene every time)

  2. If I publish this swf in the net and use a fms server to make it possible that everyone can use the swf and videos at the same time.

  what capacity I'll choose as -? How many people at the same time. There are options like 100 people-300-500 people at the same time. But in brief in my library I have videos and randomly 6 have500 on the scene.

  Thnx...

  If you import these short video files in your Flash movie, you don't need to use a Flash media server. In any case, you probably don't want import 500 video files in your movie. At the very least, that will make a unique 400 MB file that your user will have to handle the download.

  If you only 6 videos at the same time, you can randomly select 6 to view, download and use. Continue to download 6 at a time as needed as the program continues.

  The number of users should have little or no effect on the ability of the server to meet the demand. Each file is small and calling to 6 at a time won't cause tension on a server. Yet once, there is no need of a Flash media server.

• Is the server protocol multimedia Microsoft supports IPv6 traffic? Can if so someone tell me how to use any application that supports Microsoft media server protocol?

  Is the server protocol multimedia Microsoft supports IPv6 traffic? Can if so someone tell me how to use any application that supports Microsoft media server protocol?

  There is some information about technet, for example:
   
  http://TechNet.Microsoft.com/en-us/library/ee126148
   
  Depending on where you're going with this, you will find probably more people
  able to discuss in the technet promedia and networking forums.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How to find the right server to use windowsmail to send and receive e-mails?

  How to find the right server to use windowsmail to send and receive e-mails?

  Who is your current e-mail server? (Which is after the @ in your address).
   
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish 

• How can I add changes to the site after the publication, in passing does not by the cat of the company. (I used the FTP server option section directly)

  How can I add changes in a file of Muse after I already pushed to my domain I bought through GoDaddy using the FTP server directly. I'm not BusinessCatalyst and I don't want to. How can I make changes directly from Muse and then direct update to the site? If this isn't an option, how I add administrators browser edition. I have in the browser active editing on the site, but which is insofar as it allows me to get. He actually let me add someone to do or give me a way.

  You can change/update the site directly from Muse through the option publish to publish the Business Catalyst select drop-down list and choose the url for the site.

  https://helpx.Adobe.com/Muse/using/publishing-websites.html#id_83339

  https://helpx.Adobe.com/Muse/how-to/muse-publish-site-business-catalyst.html

  About IBE, you can connect to your site and add site admin users.

  Go to Site Settings > users Admin > invite.

  Thank you

  Sanjit

• How start/use vCenter Server?

  Hi guys, first I want to apologize to post an easy question to most of you, but it seems that could not answer this question with most of our staff here. For starters, I installed a vCenter Server 4.0 on a Windows XP Pro 32 Bit. The installation goes smoothly using the default SQL database that provides VMware. However after you have installed the server vCenter, we could not find anywhere! We tried to find it in all programs & gt; & gt; VMware & gt; & gt; & lt; And nothing! & gt;! If I'm not mistaken there must be an executable file as the vSphere Client shortcut located in the same directory?

  So far, we have concluded that the vCenter Server is installed in the computer as we gazed at the Add/Remove program list and found the vCenter Server installed! We also enabled vCenter Server Services but still nothing. We find the vCenter Server in the wrong direction or we should access the vCenter Server via a web browser? Any solutions would be appreciated.

  VMthinker wrote:

  UH thanks for your reply but I'm abit still confuse as I just want to know how to start the vCenter Server?

  The method is similar to the start of the vSphere client whereby you just double click the shortcut icon?

  vCenter runs like a bouquet of services. The installation created these services, to 'autostart' and began to their. Because they are defined in the autostart, they become active whenever the system is booted.

  I have already installed the server vCenter Server if the host of the vCenter server would be the same IP as the server ESXi?

  No, of course not. vCenter runs on a separate host Windows. The vCenter server IP address must be unique within the subnet IP used as each host must have a unique IP address.

  Even once, the vClient dowhnload, beginning as you start Word (or Openoffice), enter hostr of the vCenter server's NetBIOS name or its IP address as the destination to connect to and a combination of DOMAIN\username of a user who belongs to the vCenter server's local administrator group.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to use the copy utility for app from one server to another

  Hello
  I use hyperion 9.3.1 and I want to synchronize two applications on different server, I know how to use the utility to copy of app, but on the same server, I think that we can also use this utility to copy the application from one server to another using the properties file but I dnt know how to do it because the example is SQL and I am using and database oracle
  can you guys please help.
  
  Published by: sharad sapra on March 31, 2011 11:33

  Hello

  1. create a property file (this example is relevant if you have a repository of ORACLE, you can find more information in http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/frameset.htm?ch09s01s01.html]):

  SOURCE_APP_JDBC_CATALOG = SOURCE_APP
  SOURCE_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
  SOURCE_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
  SOURCE_APP_JDBC_USERNAME = schemaName
  SOURCE_APP_JDBC_PASSWORD = schemaPassword
  SOURCE_APP_JDBC_DATABASE_TYPE = ORA
  SOURCE_APP_OLAP_SERVER = olapServerName:port
  SOURCE_APP_OLAP_USERNAME = olapUserName
  SOURCE_APP_OLAP_PASSWORD = olapUserPassword
  SOURCE_APP_OLAP_APPNAME = SOURCE_APP

  TARGET_APP_JDBC_CATALOG = TARGET_APP
  TARGET_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
  TARGET_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
  TARGET_APP_JDBC_USERNAME = DatabaseSchemaName
  TARGET_APP_JDBC_PASSWORD = DatabaseSchemaPassword
  TARGET_APP_JDBC_DATABASE_TYPE = ORA
  TARGET_APP_OLAP_SERVER = olapServerName:port
  TARGET_APP_OLAP_USERNAME = olapUserName
  TARGET_APP_OLAP_PASSWORD = olapUserPassword
  TARGET_APP_OLAP_APPNAME = TARGET_APP

  2. open CMD and type copyapp /S:yourSourceAppName T:yourTargetAppName P:yourPropertiesFileName.properties /L:yourLogFileName.log

  Once the migration has been successful, you must update your users using the UpdateUsers.cmd (UpdateUsers.cmd and PlanningUserName PlanningUserPassword TARGET_APP).

  I hope this helps...

  Kind regards
  André

• How to use FMS 3.5.1

  Hello world

  Today, it's my first day on FMS 3.5.1.

  How to use FMS?

  can you help me please?

  Thanks in advance,

  JaxNa

  Hello

  First of all congratulations to establish successfully FMS 3.5.1 (I hope that you have set up)

  I will also propose you to upgrade 3.5.3, which is a free update or 3.5.

  Now as to get started go on Flash Media Developer Centre, especially on the getting started tab at http://www.adobe.com/devnet/flashmediaserver/?view=gettingstarted

  Browse all items here to get an idea of the FMS and how it is used.

  Then, you can try some cool samples at http://www.adobe.com/devnet/flashmediaserver/?view=samples learn how real-world applications are built.

  Get back if you need more info.

  Thank you

  Abhishek

• Foglight FMS server

  I tried to see how to get the FMS of Foglight Server as it doesn't seem to be a product, what I am hoping is that, if I can get the FMS of Foglight Server I can fill a gap where I can get my Foglight NMS alerts in my current environment of SCOM.  I don't want to give up that I bought a few months ago to go to another product that has the integration of SCOM.

  Any info that it's possible would be greatly appreciated.

  Thank you

  Hi Greg -.

  (FMS) Foglight Management Server is indeed point principal of aggregation and integration of the Foglight framework. You can start the process of obtaining an administration here Server trial download: http://www.quest.com/foglight or by registering at support.quest.com.

  A high level overview you will need to do is:

  1. to organize a trial of the Foglight Management Server (you may want to work with our sales or pre-sales teams to get this set up)

  2. Once you have a FMS running, you will integrate your Foglight NMS information into the FMS using Foglight NMS integration cartridge.

  3. in addition to the cartridge of NMS integration, you'll need an additional integration Foglight cartridge - cartridge allows you to integrate with a variety of third parties, including SCOM FMS systems. There is a video on the SCOM integration that you can find here:

  http://www.quest.com/TV/all-videos/959824273001/vFoglight---SCOM-integration/video/

  Note that the video was made with vFoglight (which is simply the FMS put in place with a cartridge of monitoring VMWare), but also long as you have the Foglight cartridge for installed integrations, the process must be the same.

  I hope this helps.

  Robert Statsinger

• The iPhone Mail uses the smtp server that does not exist

  My iphone SE mail constantly uses an smtp server that is not listed anywhere, but has been used there are 2 iphones.

  I deleted the account and smtp servers several times.

  There is only one main smtp server... not supplements

  I try to send an email whenever I get: user name and password smtp:mail06xxxxxxxx@authsmtp. Vodafone.nl is incorrect.

  vodafone is not my provider and I use the smtp server of vodafone.

  Anyone has an idea on how to address this problem?

  Have you tried to manually create the email account using the selection 'other '?

  What your email account provider?