AS3 via an Fms Server

Similar Questions

• Install an operating system on the Portege R100 laptop via my RIS server

  I am trying to install Windows XP on one of my laptop Toshiba Portege R100 customers via my RIS server, I install the RIS server correctly with network card drivers, but my problem is that the laptop says "NTLDR is missing, cannot resume" and restarting the laptop and I would remove the battery and put it back in front of the laptop would work and then I could get to the PXE boot agent and then it would crash and I would still have to the whole process.

  I know that this problem is to do with a corrupted CMOS sensor but how am I ment to Flash bios without using it to boot from a floppy drive (external).

  Please help it's driving me crazy!

  Thank you

  More details!

  Hello

  If a "NTLDR is missing" message that this indicates that the hard drive is not bootable. I think that the Portege customer cannot boot from LAN (RIS server)
  Have you enabled the option in the BIOS correctly?

  Check if the network boot protocol is enabled. You can choose between PXE and RPL.
  And if the LAN has been defined first in the boot order.

• Cannot "connect as current user" via the Security Server

  Hello community,

  I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.

  Single domain

  Customer of the horizon is 3.5.2 and joined to a domain

  2 Security Server 6.2.1 x

  2 Server 6.2.1 connection x

  On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:

  2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)

  2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}

  2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application

  The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.

  In the windows event log, the following error message appears:

  BROKER_USER_AUTHFAILED_GENERAL

  Failed to authenticate the user < UNAUTHENTICATED >

  Attributes:

  Node = hostnameofconnectionsserver.mydomain.com

  Gravity = AUDIT_FAIL

  Time = Mon 28 Dec 19:51:16 THIS 2015

  Module = broker

  UserDisplayName = < UNAUTHENTICATED >

  Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter

  Recognized = true

  Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.

• How to add a data center on the virtual center via VI client server?

  How to add a data center on the virtual center via VI client server?

  I formatted ESX server & ESX Server Update installed keeping the data center on the storage (of many desktop computers)

  Now I have fresh installed a new server of virtual & added the ESX Server, but I'm unable to reattach existing data centers on storage.

  What will be the way to import of existing data on server Center virtual center?

  Help, please...

  Is ' VMware-VMimporter - 2.0.0 - 30557 "is the software through which I can solve my problem?

  You need to browse each data store, go to the folder of the virtual machine, right-click on the *.vmx file and add it to your inventory.

  Andrea

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• How to use a FMS server

  Hello

  I m new fms server... hello world application is my first application... I put my helloworld.asc in my

  FMS server (c: / / program Files/Adobe/FMS 4.0/applicaitons/HelloWorld folder/Helloworld.asc)... then restarted my server...

  I have my client application in my local system... I m using rtmp://my server/Helloworld to connect to the server...

  While click on my connection, I got this error

  "Sorry, the connection was rejected [Server.Reject]: (_defaultRoot_, _defaultVHost_): Application (HelloWorld/_definst_) is not a valid application signed;" loading access denied. "

  What is c?

  can someone give me guide step by step for how to launch the app Server fms... How to load the application? How to create the instance?

  This means you have Streaming Server License and that you can not use unsigned applications. You're bound to use only the applications 'live' & 'vod '.

  If you want to try other applications just for the purpose of learning, you can install Developer Edition.

• Problems of blackBerry Smartphones with the re-activation of account e-mail via Blackberry Enterprise server - Help!

  I have a Blackberry Bold 2 e-mail accounts (personal and business). Recently, I upgraded my Vodafone contract for only part of SIM and was able to keep my old SIM card. My personal email works fine but the business Edition should be re-activated. Instructions were to validate my password via the Blackberrry using the configuration or via the browser on my computer icon. Both options have failed because of the following:

  BlackBerry: received message that Blackberry Enterprise server has not responded to my request. An error has occurred. There are 5 possible reasons being given and I do not know how to rectify one of them.

  Browser on my computer: Incorrect ID or password. Made several attempts with different entries (don't know if my ID is my e-mail address and password for that or my Blackberry).

  Can anyone suggest how I can do this move? Thank you.

  Hello and welcome to the community!

  I think you need to talk to Vodafone to ensure that your data plan still includes services / BES-level... such is required for full use of BES.

  You should also talk to your BES admins... they, well, all control.

  Good luck!

• Foglight FMS server

  I tried to see how to get the FMS of Foglight Server as it doesn't seem to be a product, what I am hoping is that, if I can get the FMS of Foglight Server I can fill a gap where I can get my Foglight NMS alerts in my current environment of SCOM.  I don't want to give up that I bought a few months ago to go to another product that has the integration of SCOM.

  Any info that it's possible would be greatly appreciated.

  Thank you

  Hi Greg -.

  (FMS) Foglight Management Server is indeed point principal of aggregation and integration of the Foglight framework. You can start the process of obtaining an administration here Server trial download: http://www.quest.com/foglight or by registering at support.quest.com.

  A high level overview you will need to do is:

  1. to organize a trial of the Foglight Management Server (you may want to work with our sales or pre-sales teams to get this set up)

  2. Once you have a FMS running, you will integrate your Foglight NMS information into the FMS using Foglight NMS integration cartridge.

  3. in addition to the cartridge of NMS integration, you'll need an additional integration Foglight cartridge - cartridge allows you to integrate with a variety of third parties, including SCOM FMS systems. There is a video on the SCOM integration that you can find here:

  http://www.quest.com/TV/all-videos/959824273001/vFoglight---SCOM-integration/video/

  Note that the video was made with vFoglight (which is simply the FMS put in place with a cartridge of monitoring VMWare), but also long as you have the Foglight cartridge for installed integrations, the process must be the same.

  I hope this helps.

  Robert Statsinger

• View customer Horizon | Unable to login via the Security Server

  Hello people,

  We strive to deploy VMware View 5.3. Everything is complete we are able to access desktop of customer view through connection to the server. But when we try to connect to the desktop via security server, authentication of the user position get us the attached error.

  Can someone please help me to understand and resolve the error?

  Thank you!

  Hari.

  Thank you for your response. Issues was DNS resolution external URL referred to the client device. We decided. Thank you.

  Hari.

• Download AMS/FMS server broken tool link

  Hello

  I am trying to download the server FMS/AMS tool, for example f4vpp.  However, the download link is broken. After clicking on the download link http://www.adobe.com/products/adobe-media-server-family/tool-downloads.html, it directs you to http://www.adobe.com/go/fms_tools_samples/, but there is no download.

  It has been broken for a long time now, anyone could you please fix it?  It is urgent and I need tool.

  Thank you

  JI

  By clicking on the link to download tools are to Adobe ID login page post you should be able to download.

  You can attach some screenshots?

• Allow only specific APEX App via Oracle Http Server

  Hello
  
  I have some difficulty to fix my Oracle APEX + Oracle HTTP Server environment.
  
  There are currently about 20 Applications that run on the server of the APEX, and I want to publish 2 of them outdoors for the users.
  
  I added a certificate in Oracle Wallet Manager to ensure the OHS, but I can access all Applications on the server of the APEX by changing just the suffix of the ID of the Application.
  
  How can allow only two applications accessible via internet?
  
  Concerning

  Hello

  Well, need us so much more information.

  You can edit a zip file of all the relevant configuration file, or you could send them to me at [email protected].

  Then I take a look and we can post the result here.

  It should also be completely specified URL that you use since you seem so use the virtual hosting.

  See you soon,.
  Dietmar.

• problems of synchronization on the language of the side FMS server!

  My app (FMS4.5) FMS use a table on the main.asc,

  those who connect to the server will be change(remove/add) the array element,

  I'm concerned if there is a synchronization issues with that?

  Is there any class that I can use to lock/unlock the table when I change the table?

  THX!

  You can have synchronization problems. For the use of locking/unlocking, you can use server side of shared objects. For more information on the shared object, see the link below:

  http://help.Adobe.com/en_US/adobemediaserver/ssaslr/WS5b3ccc516d4fbf351e63e3d11a11afc95e-7 e63SSASLR.2.3.html

• Quick Guide to FMS server-side?

  Are there examples very simple to write an app to hello world on FMS, which is accessed from Flex?  Something as simple as a Flex application stitching a custom FMS application and a response from the server-side ActionScript would be great.  I looked all through the documentation, and it seems to be lacking.

  See you soon

  Please take a look at the tutorials on FMSguru: http://fmsguru.com/tutorials.cfm - they are very useful

• How many concurrent users on a FMS server?

  We want to broadcast direct meetings with the majority of users access to our inTRAnet. 320 x 240, 30 fps, dual 2.8 GHz, 4 GB server of widows. Anyone with a similar setup to use EGIA service 200 or 500 concurrent users? We have two campuses and I need to know if I need spec a second server if we get above a certain number. How many simultaneous users can I supprot with the above configuration? Thank you
  
  

  FMS should be able to manage your 500 customers without a problem by using the configuration you mentioned (some of my apps regularly see many times more than that on a single server). I use a slightly beefier processor in my boxes... quad core Kentsfield Xeon / 4 GB ram.

  That said, also, make sure you have enough flow to your NETWORK card to carry the traffic. To 500 concurrent clients, a current of low-bandwidth of 300 Kbps puts you on point 150Mbps, so you'll need to run the numbers before commit you to a single network is used for in the case where you can't have enough juice for one box.

• Password restricted to 16 characters when sending messages via the mail server outgoing Live/Outlook

  When you use a plus 16-character password, Thunderbird fails to connect to the SMTP outgoing/outlook live.

  The problem persists after you turn off my AV, turn off my VPN, from Thunderbird in safe mode and even after the addition of a '1' at the end of my password 16ch.

  Interestingly, Microsoft has the following warning when changing your password:
  WARNING: passwords longer than 16 characters cannot be used with the Xbox 360

  See the attached screenshots.

  It is a limitation imposed my mail server, not Thunderbird. It is not just the Xbox it's all e-mail clients. The major problem is, Microsoft either don't use folk with general IT experience, preferring the Microsoft professionals who really don't know anything else or deliberately do everything except web mail as difficult as possible. They want you in Microsoft walled garden.

  I'm starting to see four Internets. Apple, Microsoft, Google one, then the open internet, the champions of Mozilla, unfortunately none of the other three Internet really want interoperability. They like vendor lock-in...

• Transfer of viruses via a terminal server

  A computer infected by a virus transfer the virus to another computer through a terminal server?

  If configure you remote desktop to use local resources, it is possible. As long as local resources options are not enabled, it is unlikely to happen.