How to use cmd in host();

Similar Questions

• How to use the control host for creating folders

  I want to create a folder called abc in my C drive using forms 6i.
  How can I do this by using the Host command?

  Host('MD C:\ABC');
  

  François

• How to use a specific host directory in the ftp configuration?

  I'm restoring links in CS4 to my sites after an upgrade from Vista to 7.

  I use Go Daddy and the ability of subdirectory. I had a hard time to set up the ftp connection and I saw in another view that the directory of the host must be left blank. This actually worked. The problem is that I want to control the access of the various creators of Web sites that is contained in a hosting account. When I use the directory correct host in the Site Definition dialog box, as I did with my setup in Vista, I get the error message:

  «FTP error - could not open the remote folder [FileName] /.» Access denied. The file exists may not, or there may be a permissions problem. »

  However, the file exists. I tried various uses of oblique, in front, in the back and at the same time, without success. I don't know that there is an answer.

  Any ideas?

  Thank you

  Mark

  You can verify that your user account has access to other accounts?  Is it a reseller account where you have your own accounts or is it a box dedicated or VPS where accounts can be in different directories?  What is a Windows or Linux box

  There are a few things that could happen, but if it ends up being a permission Godaddy problem will be the only ones who can help you with that.  But just an example of a path on a Unix/Linux environment, "public_html /".  There is no leading slash, but there is a slash in the path.  If you connect to a Windows Server, it might be slightly different, but my only experience with Windows is in a network/VPN environment, so if this is your case, I'm sure someone here can help you.

• my e-mail address is showing that Charter is not a host, so I can't send mail! How can I find the host in order to use my mail or to change?

  How can I find my host for my email?

  1. What email program are you using?
  2. Who is your mail server? (Which is after the @ in your address).
  3. What happens if you try to send a test message?
  4. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• I lost my Muse files, when my computer broke down. went to my domain, all of my info Web sites host goDaddy. in a file zip (websitebackup3.zip) how to use this Info. to get my Web site up?

  My name is KennyD

  I lost my Muse files, when my computer broke down. went to my domain, all of my info Web sites host goDaddy. in a file zip (websitebackup3.zip) how to use this Info. to get my Web site up?

  You can not. You need the .muse file.

  Always a good idea to keep backups.

• How to use iCloud in the image of the host for forum messages?

  I've just upgraded my Aperture library to Photos and spent three weeks to download all my photos on the cloud.  Now that they are on the rise in the cloud, I was wondering if I can use iCloud to host images for posting on internet forums and others?  Many of them will not directly let you download a picture, a link just here where she is already hosted (using the [IMG] tags).  In the past I had used SmugMug for this, but it seems silly to pay two subscriptions for the pictures of clouds (my library is big enough I'll have to pay Apple a monthly fee for additional storage space).

  I guess the way to proceed is to implement a shared Album and set it on the Public website.  It doesn't seem to be an option in the Photos app or site generated, to set the resolution of the images related to.  Any suggestions?

  Also: If you are going to edit the original photo, the shared up-to-date automatically version?  In my quick test convert the picture black white & in my pictures library does not change appearance of the image in the shared Album.  Sounds strange because it suggests Apple organize two versions of the image - one for me and one for sharing.  Surely, who double their storage needs?  If the photos are not synchronized, I might be better off just export those I want to publish on Flikr, or something similar (but free), which is correctly set up for what I'm trying to do.

  Thank you

  I guess the way to proceed is to implement a shared Album and set it on the Public website.  It doesn't seem to be an option in the Photos app or site generated, to set the resolution of the images related to.  Any suggestions?

  Yes.  It is the only way to share image files.

  The resolution is automatically set. iCloud Photo Sharing FAQ - Apple Support

  iCloud, photo sharing supports most of the formats RAW, TIFF, PNG, and JPEG photo. Once shared, pictures taken with your standard devices, reflex, or iOS devices will be up to 2048 pixels on the long edge. Panoramic photos can be up to 5400 pixels wide.

  Also: If you are going to edit the original photo, the shared up-to-date automatically version?  In my quick test convert the picture black white & in my pictures library does not change appearance of the image in the shared Album.

  No, you need to simply share the edited again version and remove the old version of the shared album.

  Sounds strange because it suggests Apple organize two versions of the image - one for me and one for sharing.  Surely, who double their storage needs?

  Shared albums use a different part of your library to iCloud iCloud. The storage of shared photos does not count against your iCloud subscription, but it is limited, see: iCloud: My Photo Stream and iCloud Photo Sharing limit

• How can I remove a folder directories using cmd?

  I had problem deleting files from a USB - it showed the removal, but the files were still in the directory. I tried to use cmd to delete, which worked until I found a directory which contained 2 subdirectories with no data. What command can I use to remove these subdirectories?
  I use Windows Vista

  You can use the RD or RMDIR command to remove a subdirectory (for example, the folder). At the CMD prompt type RMDIR /? for syntax.

• How to use outside of class in the packed library plugins

  I found the article very useful to Michael Lacasse (https://decibel.ni.com/content/docs/DOC-19176) how to use the library packaged as plugins. This approach makes the most sense when you try to distribute additional code after that your executable is already installed.

  My problem is that when I try to use a class from the main code in a plugin, plugins no longer works. Ideally, I would have liked the parent plugin interface to inherit from a class that is used in the main code, either by using the class as parameter of the plugin would be the next best thing.

  I had several mistakes, some runtime (#1448) or at the time of publishing ("VI it does not match other screws in the method: connector side terminal (s)"). I set to use clusters to transfer data to the plugins.

  My question is: is it possible to use a class defined in the main code in a packed-project-library, either inherited or as a parameter? If Yes, do you have any examples?

  It is not made with real CLASS structures, but I do the same with PPLs.

  Don't try to inherit from something in the MAIN host.

  Create the ancestor class in a separate PPL.

  Use it for the most PART, as it is.

  Inherit it in your modules.

• Is there an online class to learn exactly how to use the command prompt which is quite through. OR y at - it clear a book that explains in detail for this? Who should I contact?

  I would like to know how to use the command prompt.  The nethodology type in the cmd prompt with the syntax and the Liposuction, in other words, the real return to a command prompt. I downloaded about evertthing I can find about this, but can't seem to put it all.

  My OS is Windows XP Pro sp3, lots of RAM, my address is * address email is removed from the privacy *.   I would like to take a rough online study if one is available if it is not too expensive.

  It really depends on what you mean by "to a command prompt."

  If you open a command prompt window (for example, in start > run > cmd > OK), you can enter a number of orders.  The list of available commands, including their syntax, is here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds.mspx?mfr=true

  You can also follow the links here:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds_o.mspx

  If you want to get more sophisticated - automating command-line tasks - you can start here: http://technet.microsoft.com/en-us/scriptcenter/default.aspx

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How o use an icon in a standard report to display the details by using a hyperlink with APEX 5.0

  Hello

  I work with APEX 5.0.

  I would like a report (classic) display a report of details (also classical report) using a hyperlink, but not a "text-hyperlink" like 'click here for details'.

  Instead, I want to use a small icon which will occur the same result when you click on.

  It works fine, when the hyperlink is defined as text like: 'click here for details'.

  When I try to use an image, I don't get the desired result.

  Here's what I tried to Hare:

  1)

  Link-> Link attributes, then filled column: src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40 ' or img src =" & WORKSPACE_IMAGES. " "" #ICON_NAME # "width ="40"height = 40.

  = > no picture for the items in the column, but the link already created for each column of the remains (and works)

  2)

  Formatting of column-> HTML Expression, then filled: < img src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40" >

  = > the image appears for each column element, but the hyperlink is gone.

  Somone has idea how to use a picture/icon to have a hyperling in screens reported a detail?

  Thank you in advance for sharing your experience.

  Kimd cordially

  Hi Patrick,

  Link to the column-> then filled:

  Link text = #ICON_IS #

  Link attributes =.

  Target = this Application Page

  Page = 5

  Article 1 = P5_DEPTNO

  Value 1 = #DEPTNO #.

  Article 2 = P5_DEPARTMENT

  Value 2 = #DNAME #.

  Put this   in the link text not in attributes of link

  Remove the code from the link attributes.

  I don't have how to make it the way that describe you.

  Apex. Oracle.com is a hosted version of application Express, you can build online applications.

  Go to this link and the application workspace https://apex.oracle.com/en/

  Hope this helps you,

  Kind regards

  Jitendra

• Dreamweaver how to use php in dreamweaver cc

  How to use php dreamweaver form.

  See setting up a PHP environment in Dreamweaver

  http://www.Adobe.com/devnet/Dreamweaver/articles/setup_php.html

  For contact forms, I find it is best to test the form on your real hosting server - you'll have fewer surprises like that.

  tutorial into 3 parts: Contact form sensitive with Bootstrap and PHP (part 1)
  

  Nancy O.

• How to upgrade an ESXi host from the command line

  Sorry for bumping an old thread. I'm new to ESXi. I'm under ESXi 5.5 build 1331820 and I am at a loss how to apply patches.

  Preferably, I would like to apply all the relevant patches through console (SSH). Can someone give me pointers how to do this? Thank you

  Moderator note (a.p.): branched to a new discussion of software patch to version 1331820?

  Welcome to the community,

  on how to patch a ESXi host from the command line, please see for example http://kb.vmware.com/kb/2008939

  Basically download you the latest hotfix package and install it using the command esxcli . That said, please make sure that your hardware is supported by the patch that you want to apply (see http://www.vmware.com/go/hcl). You can also do before installing the patch, is to do a "dry - run" to know what . VIBS are removed and which are installed by the patch. To do this add -dry - run to the esxcli command line.

  In the case where something goes wrong, you can revert to the previous state by pressing SHIFT-R , while the ESXi hosts begins the start-up.

  André

• How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  Ashley,

  What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?