How to use the control host for creating folders

Similar Questions

• How to use the control quantity for several sliders in the basic settings window

  In a Webinar instructor (Chris Orwig) showed how to make multiple adjustments in the base Panel in the develop module.  Then, he showed how close the Basic module by clicking the small triangle at the top of the module.  The Basic module closed when it made a single control bar and the cursor appears instead. This move allowed the instructor set all previously defined parameters of basic module at the same time.  I tried to do.  But when I close the base module that no control bar and the slider appear.  Any suggestions why this is the case?

  I use Lightroom 5.4 and OS 10.9.2.

  Obviously, he wasn't in the base Panel, but in the adjustment brush:

  

  By clicking the triangle at the end of the red arrow, you get this:

  

  And there is your cursor effect.

  HAL

• How to use the function @RETURN for poster messages Essbase in 11.1.2.1

  Hello
  
  I found the business support Essbase Hyperion Planning 11.1.2.1 @RETURN rule novelty.
  
  If I create a simple BR for planning app like below:
  "@RETURN ("test return message,"WARNING);
  Validation returns error and BR can not be deployed.
  
  One is how to use the function @RETURN br?
  
  Thank you!

  He probably should be in a calco for example block

  "Profit".
  (
  ....
  )

  It is more likely to be used with an IF ELSE command, you do not want to define the condition for the calculation, roughly what the feature is designed for output.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• How to use the different start for the resolution of specific device screen

  How to use different splash Screen for the resolution of specific device in Webworks for Smartphone.
  Please suggest me the solution.

  The BB10, you can use the element of the rim: splash:

  https://developer.BlackBerry.com/HTML5/documentation/rim_splash_element.html

• How to use the copy utility for app from one server to another

  Hello
  I use hyperion 9.3.1 and I want to synchronize two applications on different server, I know how to use the utility to copy of app, but on the same server, I think that we can also use this utility to copy the application from one server to another using the properties file but I dnt know how to do it because the example is SQL and I am using and database oracle
  can you guys please help.
  
  Published by: sharad sapra on March 31, 2011 11:33

  Hello

  1. create a property file (this example is relevant if you have a repository of ORACLE, you can find more information in http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/frameset.htm?ch09s01s01.html]):

  SOURCE_APP_JDBC_CATALOG = SOURCE_APP
  SOURCE_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
  SOURCE_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
  SOURCE_APP_JDBC_USERNAME = schemaName
  SOURCE_APP_JDBC_PASSWORD = schemaPassword
  SOURCE_APP_JDBC_DATABASE_TYPE = ORA
  SOURCE_APP_OLAP_SERVER = olapServerName:port
  SOURCE_APP_OLAP_USERNAME = olapUserName
  SOURCE_APP_OLAP_PASSWORD = olapUserPassword
  SOURCE_APP_OLAP_APPNAME = SOURCE_APP

  TARGET_APP_JDBC_CATALOG = TARGET_APP
  TARGET_APP_JDBC_DRIVER = Hyperion.JDBC.Oracle.OracleDriver
  TARGET_APP_JDBC_URL = jdbc:hyperion:oracle://RepositoryDatabaseServer; SID = DatabaseSID
  TARGET_APP_JDBC_USERNAME = DatabaseSchemaName
  TARGET_APP_JDBC_PASSWORD = DatabaseSchemaPassword
  TARGET_APP_JDBC_DATABASE_TYPE = ORA
  TARGET_APP_OLAP_SERVER = olapServerName:port
  TARGET_APP_OLAP_USERNAME = olapUserName
  TARGET_APP_OLAP_PASSWORD = olapUserPassword
  TARGET_APP_OLAP_APPNAME = TARGET_APP

  2. open CMD and type copyapp /S:yourSourceAppName T:yourTargetAppName P:yourPropertiesFileName.properties /L:yourLogFileName.log

  Once the migration has been successful, you must update your users using the UpdateUsers.cmd (UpdateUsers.cmd and PlanningUserName PlanningUserPassword TARGET_APP).

  I hope this helps...

  Kind regards
  André

• How to use the clause type conditionally create new lines

  This question is just for learning - no object other than to start real world to create versions of some queries known to learn how to measure the performance of the MODEL clause clause of the MODEL versions.

  The question is: How can you write a STANDARD clause that pivots (updates) ONLY the lines that actually need to rotate and do NOT change the lines that have no value and cannot be rotated.

  I found a good site that has about two dozen example articles on different pieces. This first link is the beginning of the series.

  SQL features tutorials - Clause TYPE

  http://www.sqlsnippets.com/en/topic-11663.html

  This link is to a clause of FAQ of BluShadow MODEL version "how to convert rows to columns."

  Line - MODEL method string

  http://www.sqlsnippets.com/en/topic-11987.html

  The solution to this link uses this line of source:

  POSITION KEY VAL

  --- ---------- ----------

  R08 0 v1, v2, v3,.

  and this result set:

  POSITION KEY VAL

  --- ---------- ----------

  R08 1 v1

  R08 2 v2

  R08 3 v3

  The reason why it produces that result set is this clause of the statement of MODEL

  RETURN THE UPDATED LINES

  If you comment on this article, you will see that the original lines are all in position 0. This means that the solution reproduced EACH SOURCE LINE even if there is only one item in the list of values.

  Thus, even a line source with a single value (for example, the r01 'a') will be updated and updated this line is returned.

  For a large number of data sources with only a few lines that actually need to rotate it would be a great performance of infringement.

  This is the sample data source

  with t as (button 1, 'a' value 'abc' col2, col3 'def' of the double
  Select Union all 2, 'b', 'ghi', 'jkl' from dual
  Union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
  Union all select 4, 'f', 'stu', 'vwx' from dual
  )
  Select the key, value, col2, col3
  t

  KEY, VALUE, COL2, COL3
  1, a, abc, def
  2, b, GHI, jkl
  3, "c, d, e, mno, pqr.
  4, f, stu, vwx

  Lines 1, 2 and 4 only have a value of (a, b, c respectively.

  Only line 3 must rotate. It contains "c, d, e" and which must become 3 lines in the result set

  Value of the key, col2 col3
  1 an abc def
  2B ghi jkl
  3 c mno, pqr
  3 d mno, pqr
  3 e mno, pqr
  4 f stu vwx

  The nut of the problem is that if the clause 'RETURN UPDATED ROWS' is used, then the lines 1, 2 and 4 must be updated in order to be returned in the result set. And if this clause is NOT used, then line 3 must be updated by 'c', d, e 'c' and two new product lines: one line for a ' and one for 'e '.

  How can you do this with the TYPE clause without the help of the clause "Return LINES UPDATE"? I don't have a solution to sample showing what I tried because I can't understand what it takes to even try.

  I have a solution that uses "RETURN UPDATED ROWS" but I want to compare this performance to the exercise, when this clause is NOT used.

  We ask BluShadow to add the solution of MODEL clause to this FAQ with other similar solutions.

  Like this?

  SQL > with t as
  () 2
  3 select the 1 key, 'a' val, 'abc' col2, col3 'def' of the double

  
  Select 4 Union all 2, 'b', 'ghi', 'jkl' from dual
  5 union all select 3, 'c, d, e, 'mno', 'pqr' from dual.
  Select 6 Union all the 4 'f', 'stu', 'vwx' from dual
  7)
  8. Select the key
  9, key_1
  10, val
  11, regexp_substr (val, ' [^,] +', 1, key_1) val_new
  12, col2
  13, col3
  14 t
  model 15
  16 partition by (key)
  dimension (1 key_1) 17
  18 measures (val, col2, col3, (length (val) - length (replace (val, ",")) + 1) as len)
  19 rules
  (20)
  21 val [for 1 to increment of len key_1 [1] 1] = val [1]
  22, col2 [for 1 to increment of len key_1 [1] 1] = col2 [1]
  23, col3 [for 1 to increment of len key_1 [1] 1] = col3 [1]
  24)
  25 order
  26 by key
  27, key_1;

  KEY KEY_1 VAL VAL_N NECK NECK
  ---------- ---------- ----- ----- --- ---
  1 1 has an abc def
  2 b 1 b ghi jkl
  3 1 c, d, e c mno pqr
  3 2 c, d, e d mno pqr
  3 3 c, d, e e mno pqr
  4 1 f f stu vwx

  6 selected lines.

• How to use the character (%) wild for php/DW research?

  I am trying to create a search engine that searches in the database to print documents on the basis of several criteria defined by the user.

  DW uses sprintf() to compile the MySQL query.

  I have my attempts to find a portion of a string that should come back to something like -'% xyz %' to give results like "xyzabc abc'"

  But as sprintf uses %s defined by the user to take the values of '%' is a special character.

  I tried to use: % s %%, / % s/%, \%%s\%, but nothing works. There is no error, but the php page opens not at runtime.

  How to find a sub string in the database using the query written in php using sprintf?

  All Solutions?

  pp140 wrote:

  I am trying to create a search engine that searches in the database to print documents on the basis of several criteria defined by the user.

  DW uses sprintf() to compile the MySQL query.

  I have my attempts to find a portion of a string that should come back to something like -'% xyz %' to give results likexyabc abc'

  As you have discovered, sprintf() using %s as a placeholder for the string. The % wild card must be in your channel. It is an example of my book for Dreamweaver CS4:

  $query_getAuthors = sprintf("SELECT first_name, family_name FROM authors  WHERE first_name LIKE %s OR family_name LIKE %s ORDER BY family_name ASC",     GetSQLValueString("%" . $colname_getAuthors . "%", "text"),     GetSQLValueString("%" . $colname2_getAuthors . "%", "text"));
  

  Two instances of %s in the sprintf() function are replaced by the values passed to GetSQLValueString(). In both cases, the wildcard character is concatenated to the variable passed as the first argument of GetSQLValueString().

• How to use the activation code for creative photography cloud

  Hi all

  I'm trying the rest of photography cc, and now I use the activation code, I found in my new camera. The problem is that I am not able to do. When I try to buy the 1 year subscription, it asks for my credit card and I don't have the option to insert the activation code.

  I tried to go into "plans & products", on my account, but there is no way to get the activation code...

  How to activate the rest of photography?

  Thanks in advance

  Hello

  We can see: -.

  How activate/redeem redemption Adobe CC Code

  Hope this Helps

• How can I learn how to use the effects affect for the 1st time?

  Download to help me with the aftect effect: 'Now Playing' for my movie maker. I'm frustrated b/c I don't know how to use it.

  I see that Rick has already you linked to my favorite updated resource on the way, but I wanted to warn you that EI is not a very easy to learn program. It's a real pleasure once you know what you're doing, but it will take a few months before you really understand how to use it - and it'll take a lifetime to master. It is a very powerful program, and as such, it has a steep learning curve.

  Do not expect to pick up in a day.

• How to use the object Handle for Image cropping and rotation

  I downloaded the handle of the rogue 2,008 object that I need to know how to use it for cropp and rotate the Image.

  Contact the vendor of this product for more information on its use.

• How to use the control ring before the G15

  Steps to set up the control ring before the G15 are difficult to follow in the guide.  Any help would be appreciated.

  Hi socaljd!

  Thanks for posting.

  When setting this up, there are a few things to know.  In the upper part of the graph in the menu to set the dial is M, AV, TV, and P.

  M: manual mode

  AV: Aperture priority mode

  TV: In the shutter priority Mode

  Program P: mode

  In each of them, you must define what function is controlled by the dial to shoot in this mode.  There are two settings to choose from, TV: shutter speed and AV: opening.  For example, in mode manual m: set it to TV, the dial will control shutter speed while you are shooting in manual mode.

• How to use the control commandButton within the works of carosuelItem in one click? ADF

  Hello
  IM using Mercile componet in Jspx page. Inside the carouselItem, Im using af:commandButton to MI to property Action calling a method in the managed bean, but when I click on the command button first time it does not call the method, but when still Im clicking the CommandButton even second time, which he calls the method that is appropriate.
  How to call the method in the click.
  
  Kind regards
  Felix

  Felix - as stated earlier a click on an element of the carousel (or an element in this article) is affecting first the development on this map.
  If this is the event you want to respond to, and then you can code something in the CarouselSpinListener of the af:carousel component.

• How to use the Pivot function for range group in oracle SQL

  Hello
  
  Hello!!!
  
  I need to display the data in the format below. There are 2 columns 1 is State and another is rate.
  
  State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Total
  AK 1 2 0 4 1 4 4 35 35 4 1 25
  AL 0 0 2 27 10 17 35 2 2 35 0 103
  AR 0 0 1 0 0 2 2 13 13 2 0 6
  AZ 0 1 2 14 2 14 13 3 3 13 0 57
  CA     0     0     1     6     2     7     3     4     4     3     0     34
  
  Developed the sub query but unable to use the beach on the pivot function. Please help on this.
  
  (select (SELECT short_description
  OF CODE_VALUES
  WHERE CODE_TYPE_CODE = ad. STATE_TYPE_IND_CODE
  AND VALUE = ad. STATE_CODE
  ) STATE,
  Nr.rate
  N-NEUTRAL
  c contacts,
  announcement of addresses,
  xref_contacts_addresses xca,
  neutral_rates nr
  where n.contact_id = c.contact_id
  and n.address_id = ad.address_id
  and xca.address_id = ad.address_id
  and xca.contact_id = c.contact_id
  and nr.contact_id = n.contact_id
  and nr.rate_frequency = 'HOUR')

  Like this

  with t
  as
  (
  select 'AL' state, 12 value from dual union all
  select 'AL' state, 67 value from dual union all
  select 'AL' state, 23 value from dual union all
  select 'AL' state, 12 value from dual union all
  select 'AL' state, 12 value from dual union all
  select 'AL' state, 78 value from dual union all
  select 'AL' state, 34 value from dual union all
  select 'AL' state, 4 value from dual union all
  select 'AL' state, 12 value from dual union all
  select 'AL' state, 15 value from dual union all
  select 'AZ' state, 6 value from dual union all
  select 'AZ' state, 123 value from dual union all
  select 'AZ' state, 123 value from dual union all
  select 'MA' state, 23 value from dual union all
  select 'MA' state, 120 value from dual union all
  select 'MA' state, 456 value from dual union all
  select 'MA' state, 11 value from dual union all
  select 'MA' state, 24 value from dual union all
  select 'MA' state, 34 value from dual union all
  select 'MA' state, 87 value from dual union all
  select 'MA' state, 23 value from dual union all
  select 'MA' state, 234 value from dual union all
  select 'MA' state, 789 value from dual union all
  select 'MH' state, 54321 value from dual
  )
  -- End of test data
  select state,
         nvl(count(decode(value, 0, 0)), 0) "<100",
         nvl(count(decode(value, 1, 1)), 0) "100-199",
         nvl(count(decode(value, 2, 2)), 0) "200-299",
         nvl(count(decode(value, 3, 3)), 0) "300-399",
         nvl(count(decode(value, 4, 4)), 0) "400-499",
         nvl(count(decode(value, 5, 5)), 0) "500-599",
         nvl(count(decode(value, 6, 6)), 0) "600-699",
         nvl(count(decode(value, 7, 7)), 0) "700-799",
         nvl(count(decode(value, 8, 8)), 0) "800-899",
         nvl(count(decode(value, 9, 9)), 0) "900-999",
         nvl(count(decode(value, 10, 10)), 0) ">=1000"
    from (
            select state, case when value < 100 then 0
                               when value between 100 and 199 then 1
                               when value between 200 and 299 then 2
                               when value between 300 and 399 then 3
                               when value between 400 and 499 then 4
                               when value between 500 and 599 then 5
                               when value between 600 and 699 then 6
                               when value between 700 and 799 then 7
                               when value between 800 and 899 then 8
                               when value between 900 and 999 then 9
                               when value >= 1000 then 10
                          end value
              from t
         )
   group
      by state
  

• [DITA] How to use the attribute valign for table row to control the position of a list

  This attribute seems quite apply to < TEXT >. If a ul, p, or fig element appears in the table cell, it will not work.

  I also tried to write a rule context to li, as ul < entry < row [valign = "middle"], but there is no chance.

  OK, I had finally it works.

  I should have written the rule of context as a paragraph, so that it will not be substituted by another rule.