How to use MultiNumericLimitcheck to custom c#-teststep

Similar Questions

• How to use PF_AppGetColor() indeed custom?

  Hello

  I am able to use PF_AppGetColor (PF_App_ColorType, PF_App_Color) and get the AE color required for use in the CEAP. But I'm not able to find a way to use PF_AppGetColor() in my custom effect. For now I'm connect to CEAP and get the required color. Please tell me how to use indeed custom PF_AppGetColor().

  Thank you

  Dheeraj.

  I use it in an effect.

  This comes directly from my code.

  Suites. AppSuite3()-> PF_AppGetColor (PF_App_Color_HOT_TEXT & appColor1);

  What happens when you try to use it?

• How to use a KeyManager custom in SSLSocketChannel non-blocking

  In our existing project I had to replace the SocketChannel non-blocking by SSLSocketChannel no blocking. My implementation of the SSLSocketChannel non-blocking mask all the SSL stuff and can be used as a SocketChannel overall of the project that just use the SSLSocketChannelProvider instead of SocketChannelProvider in one place.
  
  Now I have a new requirement. Different server-certificate should be used for various IPS on the same SSLServerSocket. The relationship between the IPs and certificates is well known. The first idea was to use a custom KeyManagerDelegate that extends from X509ExtendedKeyManager to select the certificate from the server. The KeyManagerDelegate should delegate calls to a KeyManager obtained by

  KeyManagerFactory.getInstance("NewSunX509").getKeyManagers();

  It works if I use a blocking SSLServerSocket obtained by SSLContext.getServerSocketFactory () .createServerSocket ();
  
  But the KeyManagerDelegate is never called by the SSLContext if I use my own non blocking SSLServerSocketChannel. Instead of calling my KeyManagerDelegate the SSLEngineImpl throws an Exception
  

  javax.net.ssl.SSLHandshakeException: no cipher suites in common
       at com.sun.net.ssl.internal.ssl.Handshaker.checkThrown(Handshaker.java:951)
       at com.sun.net.ssl.internal.ssl.SSLEngineImpl.checkTaskThrown(SSLEngineImpl.java:466)
       at com.sun.net.ssl.internal.ssl.SSLEngineImpl.writeAppRecord(SSLEngineImpl.java:1092)
       at com.sun.net.ssl.internal.ssl.SSLEngineImpl.wrap(SSLEngineImpl.java:1064)
       at javax.net.ssl.SSLEngine.wrap(SSLEngine.java:452) 

  The next thing I'm going to try would be to get the SSLContext to use my own SSLSocketChannelProvider as ServerSocketFactory.
  
  Or I use different SSLContext for each incoming connection, which would break my own design because the server had to waste his time with the construction of new SSLContext. Another possibility is to implement a callback in the ServerSocketChannel to get a new SSLContext for each accepted connection. It would be sure my design but looks like a ugly workaround solution for me and I do not know if it works.
  
  All the best ideas?
  
  Thanks Domi

  I just tested this with my SSLSocketChannel and it works like correctly, the KeyManager methods called as expected. You hurt something else ;-) Do not extend X509ExtendedKeyManager to work properly with the engine.

• How to use a custom in OBPM jsp taglibs?

  Could someone, please, explain to me the steps on how to use a taglib custom inside OBPM 10 g with jsp?
  I created a custom taglib, it works with other projects (with jdeveloper, for example), but I'm missing something to make it work with Obpm.
  
  Thank you

  Make sure you copy the .tld and .jar files appropriate for the tag library in the directories for the BPM execution:

  Copy the .tld into /webapps/workspace/WEB-INF

  Copy the jar file of taglib in /webapps/workspace/WEB-INF/lib

  Make sure you restart the workspace after making the above changes. If you are using enterprise, you must rebuild and install le.war/.ear to the workspace and to redeploy.

• How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards

  I have a T610 HP Smart Thin Client from scratch and I get zero Smart software to recognize the card chip when connecting. How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards. You can configure without the profile HP of the XML editor.

  Mike Sieradzki

  Hello ski_mike.

  Welcome to the HP Forums. I understand that you want to support with your Smart Client zero. However, it is a commercial product. To get assistance, thank you for posting your question on the business Forums HP: HP Enterprise Business Community

  Thank you

  Mario

• How to use the plugin Cordova customized with AEM Mobile?

  Hello

  I explored the basics of the AEM Mobile over the last days and also tried to use some plugins Cordova mentioned in the Plugins to the application tab. Now, I would like to know how to use a custom Cordova plugin or plugin other than those mentioned in this list in my application.

  Is it possible to achieve today? If Yes, please provide me with the markets / pointers to all documentation which explains the same thing.

  Custom plugins support is not yet available, but on the road map

• How to identify the siebel custom index created from DB without using siebel tools

  Dear Experts,

  Please let us know how to identify siebel custom indexes that are created directly through DB. We don't are not sure on the customer tables had created indexes.

  Thank you

  Carine Ch

  Hello carine,.

  Thank you for using Oracle communities.

  Custom indexes created without using Siebel tools are not included in the schema definition in the Siebel Repository.

  Just for your information, these indexes are deleted during the upgrade of database. In order to preserve these indexes, add them to the repository Siebel using Siebel Tools.

  Now come to your query you have utility DBCHCK.

  DBCHCK is that Siebel provided utility to compare the logical schema in the Siebel Repository against objects in the physical Oracle database.

  DBCHCK must be run regularly to check the status of the Siebel business, especially after a release.

  DBCHCK can be useful to identify custom index added by the development team, but not added to the repository using Siebel tools.

  You can run it from a server in the environment. A performance by connection to the base. This should be run from the folder siebsrvr

  You can get more information from document following knowledge.

  How the Dictutl and the dbchck to run? (Doc ID 475677.1)

  I hope it helps.

  Best regards

  Chetan

  P.S. If one of the answers was correct or useful, it would be great if you can mark as appropriate help the other identified correctly updated.

• I want how to use custom, actions, brushes ets...

  I want how to use custom, actions, brushes ets...

  I put the files here...

  C:\Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets

  When I load model and ets...
  There is nothing in the record...

  What should you do?

  I use Photoshop cc 2015...

  and workign in Photoshop cs6.

  You will need to put the diagrams in the subfolder of the boss, actions in the action etc subfolder.  I thought you just need to know the path to the CC 2015 presets in general.

  Here's my presets folder and all subfolders

  

• How to use custom css I can see the result in the preview windows

  help ~ ~ ~

  I want to create my animation by visualization.

  but I don't know how to use custom css

  and show its effect in the preview windows

  only the script?

  Hi Chen,

  If you want objects of style outside the properties available in the Animate application, you can do this by using the following syntax:

  .CSS ({$("myObject") sym.

  'background-color': 'red ',.

  "width": "200px".

  });

  However, this will only preview in the browser and not on stage as the code is not running at the time of the creation. You would get yourself in a place quite bad if this has happened since the events would trigger when you try to change

  If you have a style sheet that you have linked to your project, you can also add a class of objects that reflect the CSS when you preview in the browser.

  

  Sarah

• How to use my custom defiend function

  Dear all,
  
  I simply create a new custom set function that I send him a whole month and return name.
  The function registered successfully. and everything is ok, the newspapers are ok
  
  My question: how to use my @TOSTRING CDF
  
  the following code for the java class
  --------------------------------------------------------------------------------
  import java.lang. *;
  Import Java.util;
  import java.text.DateFormatSymbols.
  class toString {}
  
  public static String fromInt (int m)
  {
  
  return new DateFormatSymbols () .getShortMonths () [m-1];
  
  }
  
  }
  
  ------------------------------------------------------------------------------
  
  
  I tried the following and check syntax result successful and executed, but now
  
  
  VAR x = 2;
  'Project status' = @MEMBER (@CONCATENATE (@TOSTRING (x), '200'));
  
  
  Please advice

  Try to write a fix and check that @TOSTRING (x) is back, ex:
  DIFFICULTY (@MEMBER (@CONCATENATE (@TOSTRING (x), "200"))
  ;
  ENDFIX;

  Or

  Fix (@Member (@TOSTRING (x)))
  ;
  ENDFIX;

  You will find a line in the newspapers saying:
  Expression [@MEMBER (<>)]...

  See you soon... !!!

• How to use the utility to update (uefi) BIOS HP

  Notebook: G62 a10em

  I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

  and it is installed on my USB key.

  Now, how can I update my bios?

  The USB key contains now:

  BIOS

  | - Current (empty folder)

  | - New (empty folder)

  | - Previous (empty folder)

  BIOSUpdate

  -CryptRSA.efi

  -CryptRSA32.efi

  -HpBiosUpdate.efi

  -HpBiosUpdate.s09

  -HpBiosUpdate.sig

  -HpBiosUpdate32.efi

  -HpBiosUpdate32.s09

  -HpBiosUpdate32.sig

  my current version of bios is f. 08

  I did a cut above.

  After looking at the appropriate file you downloaded, it says this:

  "Prerequisites .
  -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

  There is little documentation on how to use it, but a Member here figured it out.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

  using Windows 7:

  Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.

  Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.

  I put in place a new USB key as follows:

  1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak

  2. Plug the USB

  3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.

  4. Select the option to install to a USB

  5. Select the option to create the partition HP_TOOLS

  6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.

  7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page

  8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder

  9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive

  10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.

  Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

  Having said that I'm not sure of what you do, once you boot the USB drive.

  .

• How to use an order superior mother Wavelet change to discreet Undecimated Wavelet

  Hello world. I am trying to compare the results obtained from Matlab app Wavelet Design and analysis, which uses an order of Daubechies 40th mother Wavelet in order to avoid an overlap between adjacent bands, for an MCSA (current Signature analysis) application engine. I use the Undecimated Wavelet Transform. For this VI I used, to the choice of the mother Wavelet, so the entry Wavelet and filter of analysis, as well as the wavelet Design VI terminal; the maximum order of mother Wavelet in the options above, was 14. What can I do to increase enforcement of the mother Wavelet?

  Hi janotron

  If you explore this example you can see how to increase the value of the wavelet, also if you have the file with the value of the wavelet, you can use the walevert filter to read a file, you can serch in the labview examples Wavelet selection order.

  Here is a link that explains how to create the value of the walevert Custom Wavelet analysis using Signal Processing Toolkit in LabVIEW

  As I've mencioned before Wavelet could then be treated using the Wavelet filter, here is the link which explain how to use the filter walevert WA Wavelet filter VI

  Concerning

  Brenda Vargas

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• How to create a buffer custom MTS?

  Hello

  I would use a Philips Lumiled K2 bomber led to a design.

  It has an ashaped hexagonal pad below the Led.

  I created a footprint that works very well, my design seems OK

  But I don't like how I had to do...

  Let me explain, I drew a haxagonal form and made a mask of block matching and the mask welding...

  Then I added a round SMT pin, then I might give the new pad a name (so that I can use in my patterns (pin5)

  But there should be an easier way...

  In the editor of Ultiboard pieces, creating a custom stamp, I can add a pad "custom".

  Then a window opens to select a custom of the database buffer

  (Check the filter in the screenshot, it says 'custom cushion shape'). but I can't find any form in databases...

  Then, next setp, I would create my own pads custom, polygonal and any key SMT odd form,

  And give a touch, a name of pin (number attribute...)

  How can I create a custom carpet?

  Best regards

  Johan

  Hi johan,.

  so you can create a custom stamp: tools, database, Manager of database filter: custom cushion shape. Filter parts: Createnew part. Custom PADE form OK. An open design window. Now, you can create a form in any form you like, by location of shapes (circle or polygon or...) Being the reference point is inside the shape of shure. File, save it in the database. Give it a name. File, close. If you now create a new part, you can use the new pad like any other key in the system.

  consider gerhard

• Sony Smart SCR42 case - how to use it?

  Where I can get information on how to use my smart case.

  Or who? can tell me an explanation for using it.

  Hi JVC,.

  Welcome to the community,

  You can always contact the customer within your region for the support service as well.

  Use my signature below for contact information.