More problems with BSOD? Need help!

Similar Questions

• BlackBerry sudden Z10 and serious problem with Z10 NEED HELP Please

  I have a z10, one of the first who came out in Toronto (if it is one)
  (difference), a few hours ago, I fell into a serious and sudden
  problem.

  I was able to swipe left and right between the pages of apps, even fall down
  Since the Summit, but I cannot open anything, not even not making a call or settings
  Options.

  Any time I try, for a fraction of a second, it looks like its about load
  something then nothing. (image slides to the right quickly and goes back
  each attempt)

  So I first did a reset, same problem, so I did a battery pull (15 minutes) and the problem is.

  I tried via USB to do a backup on blackberry Manager and maybe do a
  Re - install everything, but when I was invited to the password
  my camera on my PC, it told me that it was (I use a wrong password
  This blackberry on my computer 4-7 days a week, twice a day sometimes for an
  year and I have never miss typed my password, nor have I changed it)

  After trying everything to make sure that the first letter was maybe upper/lower
  cases, even my other possible phone password, nothing worked...

  On the 5th unsuccessful attempt my phone prompted me to type "blackberry", which
  I did, then I typed my password on my phone that I type in about 15 times
  one day because I put my phone in a lock in 5 minutes and has always said that he was wrong... I'm no attempt of 9/10 on and lost
  for options.

  Please if anyone can give me any suggestions, or even how do I back up my phone
  and now, or I have a previous backup of whipe form 4 months ago that I
  I wouldn't come back in the worst cases.

  Thanks in advance for your help

  Well... If you are in 9 out of 10 here and you don't mind not to restore your device, then enter the password again once and then the device should enter the device wipe mode. That will reset your device to factory setting and then you can start fresh by reloading your backup made the earlier

• Having problems with backups - need help

  First of all, I have no idea where the backups are stored when they are done. Where is the area I can tell Lightroom where I saved backups?

  Second, sometimes I do a lot of work and would like to do a backup of the catalog at this time, how can I tell Lightroom to backup whenever I want? or is it possible?

  Thirdly, I know where I want to recorded while I'm doing arbitrary prior to scheduled backups regular backups of backups of Lightroom?

  THA was simply having answer to these three questions would be a big help to me.

  TIA,

  Ken

  Default backups are in the Lightroom folder in backups. However every time the back up menu shows you the possibility where to locate the back upward.

• Satellite M40X - big problems with Sims 3 - help with disk drives!

  Hello
  I recently bought the sims 3 and unfortunately an error message appears saying "Disk authentication failure" I noticed after calling EA games and reading through many forums that there was a problem evident with laptops Toshiba and their ability to play the sims 3 (disk DLA).
  I did like the forums all recommended, and I have disabled the DLA drive, uninstalled the sims and restarted the computer. Not only could I not play the sims or re - install, but my computer did not recognize even the hard drive, he kept saying 'bad volume' etc.
  I got the sims on the computer and then re-enabled the DLA drive, causing my computer to close and show a major error on a blue screen.

  I then turned the computer back on, and it does not recognize the disc sims 3 more... It recognizes the other placed disks in the cd-rom drive... But now when I put the sims 3 in the player and enter my computer to open it it tells me to insert a disc into the cd player...

  My questions are the following...

  A.) how can I get my hard drive to recognize the disc sims being in the drive

  (B) once this problem is solved, how can I go about installing and using the sims 3 without disabling the DLA, which proved detrimental drive.

  (C.) other problems with computers laptop toshiba have turned around an individual driver... Metisha or something? My driver's - VOB COMPUTERSYSTEME GMHB
  Or something to that effect, which means that it has nothing to do with the DLA drive.

  For the person who can help me, that would be so so appreciated...

  Thank you

  Please e-mail me the answer incase I can't come on the forum to work... - [email protected]

  THANKS AGAIN!

  Hello

  Please take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44255

  This isn't a problem or issue of laptop but the Sims 3 game problem
  It has been fixed in version 1.2.7

  Maybe you need to download all the patches and updates the game for you!

• PROBLEM WITH NETBOOK! Help, please

  Hello guys,.

  I'm having a serious problem with my HP mini 210 netbook 1028TU.
  
  I formatted my hard drive to create two different partitions, about a month ago and installed Windows 8 Preview Release from the Microsoft Site
  After 2 weeks of use, once Windows defender detected and quarantined 4 Trojan virus. When I saw that I tried to remove them, while eliminating the netbook suddenly stopped without any BSOD or a message.
  
  I tried to restart, but now it just won't start, nothing happened since the beginning of the start screen. So I did a USB bootable windows7 to reformat the hard drive and do a clean install of windos7 Starter as it was over early. It went well and I deleted the partitions and developments and begin the installation. During Installation when it reaches 35%, he stopped and showed windows cannot be installed. I tried again, but now he hung up while he was showing "the installation program starts.
  
  Now when I start my PC it shows: -.
  
  Your PC needs to be repaired
  and an unexpected error has occurred.

  Error code: 0xc0000034

  In addition, I ran test drive by the bios and it stuck and showed "Replace hard disk 1" in RED
  
  Please guys help me I really need for my netbook

  Fix.

  Removing and reinstalling the drive is a troubleshooting step to determine if your hard disk is damaged.

  Do that first.

  If no joy, then the hard drive will be replaced by a new to make you a netbook to a usable state.

• Problem after update, need help

  Guys, I update my vista Home premium today. But I had my (Synaptics) touchpad problem. This is virtual scrolling does not work. When I open the window mouse (from Control Panel) and go to the "Device settings" tab, then click 'Settings', the windows setting for Synaptics open successfully, but shows only 2 menus: Overview and button (while it should be more, like: tapping, virtual scrolling, etc.).

  I tried uninstalling the driver for the TouchPad and reinstall using the former and most recent driver that I got from internet. But the result is always the same.

  My Question is: what is the problem with my Touch Pad device settings and how to make it right?

  Thank you very much for your help.

  Hi d3m14w,

  Welcome to the Microsoft Forums.

  We would like to get some more information from you to help solve your problem.  You better, please answer the following questions.

  1. who is the computer or the manufacturer of the device and what is the the model number of the computer or device that has problems?

  2. the measures to check the update history: click Start-> Control Panel-> security, and then under Windows Update, click view update history. Check your Windows Update history and in this list, what is the date of the last installed update that has raised questions and made me know the KB numbers or the name of all updates installed recently?

  Sangeeta displayed
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BSOD, need help

  Hi all

  OK, so I've had my PC for over a year and have never had any problems with it. Recently, some new drivers are released for ATI - specifically, the drivers beta 13.9 and 13.11. When I updated, I started having BSOD at irregular intervals. They would produce normally when you play, I watch a video with Skype, or sometimes when I tried to load a game.
  Extremely frustrating. Anyway, I tried a few things like removing new pilots and return to 'old'. However, the problem still persists.
  I thought: "ok, something is going seriously here." So I decided to format the C drive everything.
  When I reinstalled windows and installed the drivers the problem was still there. I noticed that my windows had problems trying to install updates.
  I reformatted again, but this time I did installed all ati drivers. I decided that I would let windows install all updates first. As a result the PC BSOD when installing updates. This occurred at least 3 - 4 times during installation, updates. Therefore, I think that the problem is something to with one of the Windows Update files.
  I ran disk for drive C auditor and all is well. I also ran a Windows Memory Diagnostic tool, everything was fine.
  Blue screen display:
  Empty the file 120113-7020 - 01.dmp

  Crash Time 12/01/2013 21:14:09

  Bug MEMORY_MANAGEMENT control chain

  0x0000001a bug check code

  Parameter 1 00000000'00041790

  Parameter 2 fffffa80'011ae760

  Parameter 3 00000000' 0000ffff

  Parameter 4 00000000 00000000'

  Caused by the driver ntoskrnl.exe

  Caused by the address ntoskrnl.exe + 75bc0

  Description NT Kernel & system files

  Operating system Microsoft® Windows® product names

  Company Microsoft Corporation

  Version 6.1.7601.18247 (win7sp1_gdr.130828 - 1532) file

  X 64 processor

  Crash address ntoskrnl.exe + 75bc0

  Path of the C:\Windows\Minidump\120113-7020-01.dmp file

  Processor number 4

  Major version 15

  Minor version 7601

  276 440 dump file size

  Empty file name 12/01/2013 21:14:44
  2nd set:
  "120113-7144 - 01.dmp 12/01/2013 11:45:40 0x000000d1 DRIVER_IRQL_NOT_LESS_OR_EQUAL 00000000 ' 00 c 30000 00000000'00000002 00000000'00000001 fffff800 ' 0365e5df ntoskrnl.exe ntoskrnl.exe + 75bc0 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828 - 1532) x 64 ntoskrnl.exe + 75bc0 C:\Windows\Minidump\120113-7144-01.dmp 4 15 7601 276 384 11:46:42 01/12/2013
  Other stuff:
  CPU: Intel I5 - 3570 k
  RAM: 8 GB
  GPU: AMD 7850
  MOBO - Gigabyte GA-Z77X-DH3
  PSU: 750W
  AVerMedia HD C985 game capture
  Any help would be greatly appreciated.
   

  No problem, as I said, this indicates defective RAM. Make sure that the RAM you replace by is compatible.

  Kind regards

  Patrick

• Problem with export! Help, please

  Hello

  I am currently working on my new project in Redcode 4.5 k shoot and I got in big trouble export my movie.

  I tried to export the movie to the H.264 format / HDTV 1080 p 25f and there was NO noise or a sound terrible when I looked the exported movie!

  Can it be a problem that I copied a number of sequenzes varius in a sequence? I did it because I wanted to have a sequence where I can put the pieces together.

  Maybe that's the problem!

  Please help me!

  M

  Guten Tag,

  Am fantastischen an meinem neuen Projekt und beim Exportieren ist folgendes aufgetreten problem:

  ICH Versuche in first Photo aus einer zu exportieren sequence das mit dem Vorgabe Format H.264: HDTV 1080 p 25f dann erhalte ich einen Film mit entweder Bel your oder mit einem hohen Pfeiffen.

  DAS Filmmateriao das ich wurde auf einer bearbeite redone Redcode Codec quality 4.5 k.

  Kann're breast dass der nicht ist weil ich fertig einzelne possible export sequences kopiert habe und einer neuerstellten sequence zusammengefügt habe, eine quasi sequence as scenes standing habe um sie fertig sleeps aus the other scenes-sequences zusammenzustellen.

  Ware toll wenn someone could help!

  Danke

  M

  Hello! Welcome to the forums here at Adobe!

  As long as you can hear the sound when you play through your final sequence, you should have no problems to export as long as your audio options are correctly set in your export Panel. Nesting of the sequences that you have described is a very common task and will not at all affect your audio files.

  Make sure that your "Export the Audio" checkbox is checked in the window of your export. If this isn't the case, then that would explain your problems. If it is checked, then there may be something more deep as the cause, in which case it would be helpful if you could post us screenshots of your table of sound mixing and the head section of your audio tracks in the timeline panel.

  Also make sure that you're using Adobe PrPro 5.5 and that you have all the updates correct, including the RED importer, as the new RED files do not work in older versions of first. If files were shot on the RED Epic, sound doesn't work at all in native file (known bug) first and so you will have to use program Cine - X RED to export audio files to make separately and synchronize with your video. However, you would never get audio in your timeline at all, and so I think you would have noticed this problem before that you have to export, so I think that's not your problem.

  Good luck and report what you find with your export settings!

• Recurring problems with flash, please help Urgent for the University works

  Hello, Im having problems, my 1st chassis code is

  Stop();
  import flash.events.MouseEvent;
  sync_btn.addEventListener (MouseEvent.CLICK, onClick);

  function onClick (e:MouseEvent): void {}
  gotoAndStop (2);
  }

  This seems to work very well and get my in box 2, which is where I have problems, my goal is to make a button to proceed and a button to return to the first image I p much copied what you used.

  Stop();
  SyncMusic_btn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler1);
  function mouseDownHandler1(event:MouseEvent):void {}
  gotoAndStop (3);
  }

  BktoConfig_btn.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler2);
  function mouseDownHandler2(event:MouseEvent):void {}
  gotoAndStop (1);
  }

  Instance names were copied directly from where I named them so they're right, it makes me crazy because ive been working in cs5.5 in college and on cs4 at home and my cs4 does not work my cs5.5 work, that I had made a start on (when it worked)
  I get the error message:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at Untitled_fla::MainTimeline/frame2()
  at flash.display::MovieClip/gotoAndStop()
  at Untitled_fla::MainTimeline/onClick()

  And the button will back does not work, Im urgently need help because this assignment is due next week, and Ive been working on it for at least 2 weeks now and nothing I can seems to work.

  1009 error indicates that one of the objects targeted by your code are out of reach.  This may mean that the object...

  n ' is not in the display list

  n ' is not have an instance name (or the name of the instance is misspelled)

  n ' is not in the frame where this code tries to talk to her

  -is animated in place, but is not assigned the name of the instances of each keyframe for her

  -is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).

  If you go to your section to publish the Flash settings and select permit debugging option, your error message should have a suite of line number the number of the frame that will help you to isolate the object that is involved.

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• problem with bsod

  I have a serious problem with a bsod after installing a graphics card, the computer will work as long I do not play all the games and if I do then will be blocking and do a minidump and then I get the bsod. Here are the links to skydrive for the dmp and info file system, please answer

  link info sytem https://skydrive.live.com/redir?resid=9AA1469B8D6620A3! 107 & authkey =! AJlUv5dDp-NorFU

  link files DMP https://skydrive.live.com/redir?resid=9AA1469B8D6620A3! 108 & authkey =! AHVFp5R9qGlphgw

  watchdog.sys crashes 0 x 00000119, his dxgmms1.sys crashing

  Ntoskrnl.exe crashes also

  dxgkrnl.sys x 3 crashes 0 x 00000116

  It may be crashing your atikmpag.sys of video card drivers

  discache.sys crashes also 0 x 00000117
  See if it updated the ATI drivers on the AMD website.
  And see if HRT fixes the crash of directx. Extract then install

• Problem with Adobe online help

  Dear Sir.

  Hi, my name is Palm.

  J' have a problem with using Adobe. Whenever I use the function 'Leyer Style' > > 'Gradient overlay'.

  Adobe online help is often poster without my by pressing o. r click on whatever it is.

  It was a problem with my work.

  I have to restart the program. To working again.

  
  Thank you for aid.

  Nice day!

  This thread does not bode well for the issuance

  http://forums.Adobe.com/message/5209896#5209896

  What version work woth and is it fully updated?

  Kind regards

  Pfaffenbichler

• I have adobe first 10 items and I'm having some problems with it please help

  Here are the problems I am having with Adobe Premiere Elements 10:

  1 transitions won't load. The word loading will appear and it will not come to the top.

  2. the videos will not play smoothly. When I press on play skipps in a way he will not play smooth, making it very difficult to change.

  3 keeps closing on me. It will be something that comes up that says "Adobe premiere elements has stopped working and closes in the program. He does constantly.

  Please help me I don't know what's the problem with him.

  The first two numbers sound like a video driver issue.

  What is the make and model of your video/chip card?

  What is the installed video driver number and date?

  For the last number, it could be many things, including the video driver. I look over this ARTICLEand if there is nothing in the first part, then proceed to set up a computer in the second part of the OS. It would probably be a good time to publish the complete specifications. your computer and the images of your project and Source. Finally, the third part covers many of the troubleshooting tips and provides many links.

  Good luck

  Hunt

• I HAVE WIN 7 64-BIT, MOZILLA FIREFOX IS MY BROWSER HASVING PROBLEMS WITH JAVA CAN HELP PLEASE

  I HAVE WINDOWS 7 64 BIT LAP TOP, I'M WITH MOZILLA FIRE FOX AS MY BROWSER, HAVING PROBLEMS WITH JAVA... WHICH SHOULD I USE? ALSO CAN I HAVE THE WINDOWS PHOTO VIEWER TO OPEN FILES

  First; There, please do not type in uppercase.  It is considered rude and make your post less readable.

  The version of Java to use depends on the browser.  Firefox is a 32-bit browser therefore uses the 32-bit version of Java.
  Internet Explorer, for example, has a 32-bit and 64-bit version in Windows 7, the two versions of Java may apply depending on whether you are using.

  The Windows Photo Viewer can open different types of graphic files, what is the problem?

• Problem signature App - need help with fixing my "package-author-Id".

  Hi all

  I have a problem of updating an application already in the world of Blackberry.

  I recently created a new version of an Android/Blackberry app existing.

  I can't download it on the Blackberrystore but because of the error:

  "File BAR ("xxxx") was rejected. The BAR ("yyyy") package ID does not match ID of the app ("zzzz") Package. »

  After reviewing the MANIFEST file inside the bar, I discovered that the package author Id differs from that in my old bars.

  According to my research, it is because I'm using a new bbidtoken.csk file (which I downloaded from https://developer.blackberry.com/codesigning/ using my old login ID Blackberry. I downloaded a new bbidtoken.csk, because the old one expired recently).

  After research, I found this article: "'http://devblog.blackberry.com/2013/08/code-signing-keys-be-gone-welcome-blackberry-id/ ' who suggested linking the new bbidtoken to my barsigner.csk"

  Unfortunately I do not have the barsigner.csk (there is an existing application that I took over), so now I've hit a wall.

  It would be more appreciated if someone knowledgeable could help my solve my problem.

  Additional info:

  Files I have:

  -old bbidtoken.csk

  -new bbidtoken.csk

  -author.p12

  -a barsigner.db empty (?)

  -bbt_id.RSA/.pub (not sure if necessary)

  Method used to sign App: Eclipse plugin, Blackberry

  When you download a new token ID BlackBerry (bbidtoken.csk) you must ensure that you use the same account on BlackBerry ID that was used to create the previous token.  As long as the account is the same, the package-author-Id will be the same and you will be able to sign the updates and fix the error you get.