How to use the Clone Stamp tool

Similar Questions

• Help with using the Clone Stamp tool.  How do a get a better game?

  Hello

  Please see my sample image:

  

  As shown in the picture, I want to remove the wood in the corner.  I thought using the Clone Stamp tool would give me the look of the corner by sampling above the wood and then clone on the wood.  But what I got is a lighter angle of research, not what I want.  I tried some blending mode, but I don't get the game I want, so I thought I would ask here.  Is there a better way to do it?  I have this same problem with other image like this.  I take a point of sampling part of the image and then the Clone Stamp ends by lighter or a different shade in the buffer zone.  Yet once, maybe the clone stamp tool is not the right tool to do this, if so, what else is there?  The Healing Brush tool is worse for what I do in the type of healing.

  Thank you

  The Clone tool may not be the best choice when large areas are involved. It is easier and faster to make a selection of an area of choice and then using Edit > transform > deformation to replicate and extend the area selected, as shown here

  

• Could not use the Clone Stamp tool as the area to clone has not been set

  Freshly installed 10 items.  Can not use the option-click to define an area for the clone stamp.  The error I get is:

  Could not use the clone stamp tool because the area to clone has not been defined (option - click to set a sampling point).

  New Mac Mini.  Had the same problems in Elements 9 so I installed the trial of 10.  Is it an error of keyboard shortcut?  Do not have this problem with Elements 9 on my Mac Air or my Windows 7 system.

  I'm not a newbie and know how to use the tool clone.  I won't say that I'm an expert, so if it's something related to diapers please throw some ideas.

  Yes, that sounds like a problem of layers.  If the area that you use to define the source of duplication is a transparent area on one of your layers, it will not work.  Released from the Palette layers, then make sure that you use the area of the image (and not the mask area) - if the area of the image on the layer is active, it will have a border.

  Ken

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• Appearance of the Clone Stamp tool

  OK - Here's a pickle that drives me crazy:

  In general, when I use the Clone Stamp tool, I put it to a diameter of, say, 19. He presents himself as a circle on my image and I can use it without problem.

  Occasionally, it instead of it will appear as a sign-it works the same, but the Visual driving me crazy! It seems finally back in the circle, but I can't understand how to control actually when!

  Help oh please.

  Thank you

  The CAPS LOCK key. Shift made the target reticle.

• When you try to use the clone stamp. a red part appears and the message saying it is a mistake and close photoshop, reopening the same case, no problem there is little time

  When you try to use the Clone Stamp tool, the screen becomes a partial red screen and a message from Windows saying that an error has occurred and close Photoshop.

  The same thing happens again after the reboot, ALL work is lost, this has happened only recently

  Hi all, thanks for your help, I went into preferences and disabled tick graphic, now everything is OK thanks Ben so

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• Stupid Photoshop. Clone tool does not. That means "could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)" means?

  Please help and bear with me, I can not know what you are talking about. Total newb

  Nice day!

  The Clone Stamp tool is intended to be used to paint the parts of an image on one image (the same or another).

  To do this, a sampling point must be set for Photoshop 'know' what piece to be used and which is done with the Clone tool from the selected buffer, alt-click on the space provided.

  Kind regards

  Pfaffenbichler

• I have a problem with the Clone Stamp tool?

  The Clone Stamp tool doesn't work really well it does not tell the source select and the pad want not applied the correction?

  You have two active subscriptions.

  1, adobe Stock.

  2. the plan of creative of cloud photography

  Please let us know the question you face with which order a screenshot will be more useful.

  Concerning

  Stéphane

• Hello! I use photoshop elements 12 and I just set a new model. Using the pattern stamp tool, I'm brushing my boss on my photo; However, the model will be released in checkerboard and I don't want it to be checkered, on

  Hello! I use photoshop elements 12 and I just set a new model. Using the pattern stamp tool, I'm brushing my boss on my photo; However, the model will come out in checkerboard and I don't want be check patterns, only the template itself. I tried checking and unchecking the box alignment, but it doesn't seem to change anything. How to brush on the model without making a checkerboard pattern.

  Well, defined bosses are in fact repeat patterns, that is why your seeing what looks like multiple images of the same thing.

  This means that if you try to cover a larger area than the initial size of defined pattern, the pattern is repeated.

  What you could do is to make a selection of the area you want to fill the (flower) pattern with and go to layer > new fill layer > model

  Use a combination of the scale slider, then move the model on the image until your happy with the set up.

  (while the Model dialog box fill is open you can click on the area of document and move the model)

  front

  

  After

  

• Automated control of the option line in the Clone Stamp tool. Intentional? Or my installation?

  Hello

  Today, I noticed an "Aligned" somewhat unusual in the Clone Stamp tool when behavior is deselected. By double-clicking on the image with the button alt or option key causes of the behavior of the tool of change and 'Aligned' to become verified. So if you do not intend using aligned, you alt/option click of your mouse to point the source, decide on a different source point, click alt/option and all of a sudden you find yourself using an aligned clone stamp.

  This does not happen with the Healing Brush tool, which makes me think this isn't an intentional shortcut. It is also powerful irritant.

  I tried it with x 64 and x 32 CS6 on Windows. It happens on both. It also happens on the Macintosh? Is it possible to turn off this behavior?

  Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08 / 08:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  Best wishes

  Dave

  Discussion title has been edited by: Dave S.-C.

  OK, according to Jeffrey Tranberry, there is currently no way to change this behaviour given - reset tool (something that I constantly forget!) reduces the time that the second click took to be recognized, allowing better control of the tool for me. Hope this helps someone in the future.

  If changes should be made to this I would double click switch to be turned off completely.

  Post edited by: Dave S-C (corrected name of JT)

• Problem with the brush of the Clone Stamp tool.

  I have not had this problem before.

  The brush takes the form of the Clone Stamp tool, that it is in the Toolbox, instead of a circle, as it was before.

  I have not found a solution to help : Brushes Sets the brush. Click the arrow next to the brush sample, choose a brush category from the pop-up menu of the brushes, and then select a brush thumbnail.

  In the photoshop elements Editor, go to Preferences > display & cursors

  and adjust the slider of the paint on normal or full-screen.

  

  MTSTUNER

• CS3: alignment of the Clone Stamp tool

  This has been me mad for years and I finally decided to post it here to see if I could get help.

  Imagine a photo of a wall against the horizon. Dead-level in the framework. There is a smutch at the intersection of the wall and the horizon, I want to clean up with the clone stamp. I use the sliders 'accurate', btw.

  So I pressed at the same intersection a little on the side of the smutch option. Once I did the crosshairs disappear to make things more difficult than they should be, but I move tool directly horizontally , and then click the center of the tool to the specific intersection.

  The tool sticks an image which is moved vertically by a number of pixels. No matter how to move tool when I click I can't get the hotspot of the tool on the ground where it should be.

  Why is this? Happens all the time. There must be something I am doing wrong.

  Thanks in advance

  You can always press the option key to get line of sight again, then release the right of option before starting the cloning. So: Press option, reticle is just between the finger and the wall, click on to the bottom to get source. Press option again to get line of sight, move the tool horizontally and aim using crosshairs, OUTPUT option and start cloning.

  Also check out the clone source Panel (window > source of duplication). It has an overlay and the shift feature could be useful. You don't seem a prime candidate for the new preview of clone feature in CS4.

  http://www.Peachpit.com/guides/content.aspx?g=Photoshop&seqNum=410

• How to fix the clone stamp?

  MAC OS / Photoshop CS5 As you can see in the attached picture, my selection of clone stamps originate at the edges of the outline, which makes using it very clumsy to use. My installation of PS home and all the facilities of this company is not done. I tried to play with all the clone stamp settings, reset the settings to clone stamp and reset Photoshop general preferences on startup. However, nothing I've tried has had no effect. So, how can I get this adjusted so that the clone selected buffer zone extends to the edges of the gray outline?

  

  What version of mac os x are you using?

  If what JJMack suggested above does make a difference, then in general the brush

  size with photoshop on mac os x slider can be affected by the setting of the size of the cursor

  located in universal access. usually, you want the size of the cursor set to Normal.

  something like this, depending on your version of os x:

  http://etc.USF.edu/techease/4all/vision/how-do-i-increase-the-size-of-the-cursor-in-Mac-OS - x.

• Please help, I have reset the Clone Stamp tool in CS5 and it's always the same.

  Hello

  I run Photoshop CS5 on my Mac and I have not had problems since I installed Photoshop originally. Yesterday, the Clone Stamp went crazy mad and starts to move the frame surrounding whenever I chose a source. I have uninstalled, reinstalled, plug-ins installed and reset tools (reset several times). Nothing has changed and I have some urgent changes to make. Please help, thanks.

  PS, I have read several forums that were kind of related to this problem and nothing I've read has helped. Sorry if it's repetitive other problems for everyone.

  If you go to window > Clone Source and choose Clipped, isn't that better?