How to use the different style sheets for ChangeAttributeRequest workflow in OAM
HelloWe have a requirement to invoke different change attribute request workflows (change password, change email etc.) of external JSPs.
I want to apply different style sheets for each workflow. In the URL of the workflow if I get style = the style sheet name its not not using this stylesheet. Its still using the same basic (wf_changeattr.xsl) stylesheet. How can I use different style sheets? Pointers on this is appreciated.
Thank you inadvance.
Kind regards
Srikanth
Hi Srikanth,
Are you using & xsl = stylesheetname or & style = parameter? XSL = must specify a specific xsl file, while & style specifies a complete style (for example & style = style0 for the default style).
Kind regards
Colin
Tags: Fusion Middleware
Similar Questions
-
How to use the hierarchy of position for approval workflow custom?
Dear all,
I created a custom workflow that is triggered whenever develops a new provider site.
Now, I want to add the trust hierarchy in this stream. To do this, I want to use the hierarchy of the Position.
I didn't find useful resources to do so. Can you help me please?
Kind regards
NatashaSalvation;
Please check:
Adding a custom Workflow process [ID 374930.1]Respect of
HELIOS -
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
-
How to use the sign ' # ' in jQuery for id?
How to use the sign ' # ' in jQuery for id? When I try to use it as ($('#PropertyAttributeValue').css ('color', 'red') ;) I got error as follows:)
The CFML compiler treated:
- An expression that starts at line 64, column 37.
The expression might be missing an end #, for example, #expr instead of #expr #. - The body of a beginning of tag cfoutput on line 19, column 18.
Use the two hashes to escape the first:
($('##PropertyAttributeValue').css ('color', 'red') ;))
- An expression that starts at line 64, column 37.
-
How to use the same services-config for servers the and remote.
My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.
<? XML version = "1.0" encoding = "UTF-8"? >
<>services-config
< services >
< id = 'amfphp-flashremoting-service' service
Class = "Flex.Messaging.services.RemotingService"
messageTypes = "flex.messaging.messages.RemotingMessage' >"
< destination id = "amfphp" >
<>channels
< Ref channel = "my-amfphp" / >
< / channels >
Properties of <>
< source > * < / source >
< / properties >
< / destination >
< / service >
< / services >
<>channels
< channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
< / channel-definition >
< / channels >
< / services-config >I think the problem is the line
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "but I don't know how to use the same services-config for servers the and remote.
I'll back up a bit.
Breakpoint URLS are defined as follows in the services - config.xml:
https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure
The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.
If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.
In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.
-
Different style sheets for several accordians?
I am a newbie to Dreamweaver CS4 and you just to add my first accordion to a Web page. I modified the stylesheet of the accordion, and it looks and works like I want. My question is this:
If I want to install an accordion with a different style on a different site page, when I insert the accordion on the second page, Dreamweaver automatically generates a new stylesheeet with a different name for the second accordion? Or the new accordion automatically adopt (or replace) styles of the first?
I appreciate your advice.
Thank you
Scott
Scott,
Thanks for your reply, Randy. I'm sorry to be a bit slow on this, but I want to be sure that I understand what you're saying.
If I add this second accordion to a second page, by default it will adopt the same style sheet that I created and modified for my first accordion?
If this is the case, so I just make a copy renamed this stylesheet, edit it, and then specify the new name of the style sheet in code to the new page?
As I understand it, what you've done so faris to modify the SpryAssets/SpryAccordian.css. Fix?
If so, * to rename the SpryAccordianFunky.css file (or something correctly descriptive). Dreamweaver asks if you want to update the links, so don't answer 'Yes' then your existing page breaks.
Now, next time you add a Spry Accordion to a page, will add a new copy of SpryAccordian.css in the SpryAssets folder and that Spry Malaccaaccordian will get the default appearance. If you want the 'other' look, then rename the reference to SpryAccordian.css to use the new file.
HTH,
Randy
-
How to use the sony hdr-XR160 for a video stream live
Im trying to use the Sony HDR-XR160 for a video live feed to the internet, but can't seem to find out if this is possible.
The camcorder has HDMI and A / V output connections. Depending on your computer, you can connect the camcorder to a HDMI IN and A / V in port. Once connected, you can start streaming using the appropriate software. Please see the manual for more information on the available ports, you can use your computer operating.
Please note that USB streaming is not supported by this unit.
If my post answered your question, please mark it as "accept as a Solution.
-
How to use the different start for the resolution of specific device screen
How to use different splash Screen for the resolution of specific device in Webworks for Smartphone.
Please suggest me the solution.The BB10, you can use the element of the rim: splash:
https://developer.BlackBerry.com/HTML5/documentation/rim_splash_element.html
-
Batchmodel: How to use the different positions of the switch-for EHR?
Hello
I use the Batchmodel OR three EHR. HAD the current number can be read from RunState.TestSockets.MyIndex.
Can the lot this three EHR. What is the way - OR to use different maneuvers (OR-SwitchExec) to each dut?
TestPlan is for example
Configure the DMM
Put
Measure
Turn off the switch.
Switching is of course different for each Instrument.
I really should add an if around each switching (= endless work) or is there an easy way that I'm not currently?
If (RunState.TestSockets.MyIndex == 0)
DUT1 switch
Else if (RunState.TestSockets.MyIndex == 1)
Switch to DUT2
Else if (RunState.TestSockets.MyIndex == 2)
Switch to DUT3
on the other
end
Thanks for the tips
Best regards
OO
I wouldn't use either of the prerequisite or if things... It's too much work and I'm lazy.
I would just use the built in step of switching:
http://zone.NI.com/reference/en-XX/help/370404G-01/NISE/TestStand/
Name your routegroups in Switch Executive to match your shooting numbers.
For example, in the process (s) to connect: box can have the following expression:
"SigGenToUUT" + Str (RunState.TestSocket.MyIndex)
And have a road connecting the signal generator to the UUT named SigGenToUUT0. It would be for USE in socket 0.
Just a thought!
-
How to assign the different VTEP subnet for each grid of a group pool?
The design guide NSX to use L3 access design, it is recommended to use the same number VLAN per rack, but with the other subnet
10.66. < id rack >.0
10.77. < id rack >.0
10.88 < id rack >.0
10.99 < id rack >.0
If the client compute cluster spread on grids, then we will have a different subnet for each rack VTEP, something like (assuming that vlan 77 is for VTEP0
< rack 1 > 10.77.1.1, 10.77.1.2, 10.77.1.3...
< rack 2 > 10.77.2.1, 10.77.2.2, 10.77.2.3...
During the preparation of the host, GUI invites you to assign VTEP for Pool DHCP/IP, looks like most of the cases we use Pool of IP, then for the compute cluster, how can assign us VTEP IP in a different subnet in a single group?
Thank you
Clarisse
You have two options:
(1) DHCP using support on every TOR address suggest you. This is the recommended approach
(2) DHCP then changing manually the VMkernel interface IP address on each ESXi host to match the required subnet - this is not recommended because it is not automatic, but is still supported
-
How to use the Satellite M500-ST5401 for mobile calls using Bluetooth
Team,
I would like to know more information about the bluetooth connectivity of a laptop for mobile phones bluetooth-enabled. My model is Toshiba Satellite M500-ST5401.
What I'd like to meet, I have a Sony Ericsson mobile phone and it has bluetooth with A2DP function.
Normally, if we have a headset stereo bluetooth
Mobile can be coupled and listen to music using the bluetooth headset for music that plays on the mobile phone.The same that I feel every time I get a call on my phone, I would like to transfer the call to my laptop where I would use portable speaker to listen to the voice of the caller and the computer laptop microphone to answer the call of mobile, and then it will be supported by mobile phones.
Please let me know if this is possible, I just want to hold the phone away from my hand and wanted to manage calls incoming and outgoing, sitting just in front of the computer using technology built into cell phones and mobile devices.
Please recommend me what are all the driver software and the hardware must be installed to achieve this.
Your response is much appreciated thanks in advance.
You have already started a thread on this topic:
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=181953
Don t create different threads on a single theme to avoid misunderstandings! -
How to use the rule in WordPad for Windows 7
Aid for the revised new WordPad for Windows 7 does not mention rule. There is no indication as to the definition of the margins of sovereign or how to click on the settings tab.
The margin for Wordpad settings are stored in the Page layout dialog box. Access it from the "file" menu (icon just to the right of the home tab).
Change tabs is a matter of clicking on the rule itself. Once a custom tab has been created, the tab spaces by default in 0.5 are replaced until the tabs custom custom tab can be moved left and right to improve positioning, or dragged the rule to remove. The rule also allows to change the body and the first indents of line from any point.
If you prefer to work with dialog boxes for the settings section/tab, right-click on any paragraph and select the paragraph menu item. It can also be raised with the paragraph buttonon the home Ribbon, then on the right-most button tab in the second row or paragraph section. The tabs button is at the bottom left of this new dialog box.
Using WordPad
http://Windows.Microsoft.com/en-CA/Windows7/using-WordPadIf you use the Internet to find more information, do not forget to include Windows7 in your search terms so that you get the appropriate information. (for example 'tab in Windows 7 wordpad settings')
- If this proposal of solution solves your problem, please go back and mark as answer for others to consider.
-
How to use the personal style polifonoc in a partition?
Hello community,
In Logic 9, I used to combine 2 flutes in 1 staff and used personal style polifonic when they played different roles.
How logic X?
Thanks in advance.
It works exactly the same way. Why is your question?
-
How to use the different policies of VPN configuration
Hello
I'm trying to configure two different policies in a cisco VPN router 1760. Say politics 10 and 20 as below
------------------------
crypto ISAKMP policy 10
md5 hash
preshared authentication
!
crypto ISAKMP policy 20
BA 3des
preshared authentication
Group 2-----------------
What I want to know is, how can I use different strategies for different peers because some customers want 3DES/MD5 and some 3DES/SHA with Group 2, etc.
For example, for A customer, I need to use 10 policy and for client B, I need 20 policy.
I would like to know how I can bind policy according to my needs currently all default values to a single strategy. I have this option in Nortel and other boxes of Firewall and I don't know how I can do this.
We have all these binding as political ikakmp are
no doubt, you can just play with the order of the isakmp political and which initiates first of all, these are the only 2 ways to do this, as I see it
first play with the order of isakmp policy
Second, it also depends on who is the opening
-
I created a labview project that contains about 40 vi. Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards. As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development. The problem is how long it takes to go and change the control panel of each single vi. I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.
All controls in the control panel are in a bundle, so all values are passed to 1 thread.
I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.
I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.
Is there a another way to display the front panel of a Subvi next using a panel of void? Is there a better way to propagate changes in a bundle in a series of vi?
Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.
Have fun
Ben
Maybe you are looking for
-
Someone has used my card with Apple paying respect
I received a call yesterday from my Bank and they said that if I used my credit 2 debit card purchases at Wal Mart. They used Apple pay to pay my question is how they could put my card on Apple info pay. I do not have an Apple payroll account but can
-
Contrast of the menu bar is sick. How can I make it look more vivid?
How can I increase the contrast for the Menu bar?
-
Envy 17: How to change the new answers to installation of PC
I just got my new HP Envy 17 with 10 Pro 64 - bit Windows for the first time. He went through a series of first time, the Setup screens. Two screens will appear with the options of privacy settings with respect to sending any information to Microsoft
-
I would like to know if I can listen to books on a Sansa Fuze. I am a student of Microsoft Windows and would like to walk and read. The "rocket" allow to do this? Thanks in advance Bob
-
Vista Premium check A few years ago, I bought a second hand PC... It has been a real installation CD of Vista Home basic. However, the computer is running on a Vista Ultimate. Recently I installed the updates, but I needed to verify the copy of vista