How to: use the integrated web camera

Similar Questions

• How to use the tool in camera raw ch cc mac adjustment

  How to use the tool in ps cc mac.

  Specific measures.

  Thank you!

  Hi brunog,.

  Please see the tutorials below.

  Making color and tonal corrections in Adobe Camera Raw

  Tutorials Adobe Camera Raw 8 - tool straighten

  Hope that helps.

  Kind regards

  Mohit

• How to: Perform a Firmware Upgrade using the integrated Web server for HP printers

  Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.

  Hope this video is useful if you find that it had to update the firmware on your HP printer.

• How to use the external USB camera on iPhone IOS 6?

  Hello

  I need to use an external USB Endoscope for the inspection of vehicles and etc. using IOS on iPhone 6.  I bought an external USB 2.0 adapter lightning, plugged in the endoscope (comments showed that this endoscope works on IOS devices) and it pops up and says that the device used too much power to be used on the device.  You are not sure if Apple cut the device to use at that time or not? But the device was always powered up as shown on the drive of the USB light on the endoscope.

  I downloaded several types of applications of the observer including I think that the right VLC who apparently used one of the reviewers and I couldn't figure out how to get an any of them to allow the selection of an external camera.

  Does anyone have an idea if it will work or how I can make it work?

  I would be very grateful for any input or assistance with this!

  Here is the link of the product:

  http://AMZN.to/25pJpXY

  Thank you very much

  Dave

  I must also point out that this unit has worked on Android Samsung Galaxy Note 5 with no problem and no warning of power.

• Performing a Firmware Upgrade using the integrated HP printers Web server

  Hi all

  This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.

  Hope that the information contained in my previous post are useful if you are in the need to update the firmware on your Laserjet.

• Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hello

  Search for information to Acer.

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• How to use the camera application

  original title: using the camera application

  According to me, that there is a photo on Metro Screen App.  Is there a documentation or a tutorial on how to use it and what it is for?

  When I click it, I see three small icons in the bottom right...  Camera, Timer and video options.  I don't know what to do with them.

  I see me, looking me in the opposite direction, that seems odd.  I found a folder in my pictures, to my surprise, with pictures of me and two videos! I think that pictures should occur when I click on the screen, but I have no idea how I created a video or how to do it again.

  This looks like a fun app but I need help to use.  I couldn't find anything in the help files.

  Any help would be greatly appreciated.

  MaryLou

  Note: I probably don't not select the category of app so if not, please move this where it needs to go.

  Dena, regardless on the computer because it is an external Kodak camera.  I know how to use the camera itself, but the camera application that appears on the screen of metro is NOT just easy to use.  It shows 3 small icons, one is a timer, the other is for the videos and I forgot what the other one was for.

  In any case, I finally thought to it.  To use the camera, you click on it, then you must click on the screen to start the camera going.   I'm not sure that the timer is for, but again, once you click on the timer icon, you click on the screen to start the timer.

  My camera screen is not screen mode have won 8 metro.  The camera works fine via desktop applications.  I have it working in the version of Win 8 of Skype as well.

  I like to win 8 but it is so lacking in the documentation that it is difficult to learn to use the new ways of doing.

  Thanks for the reply but as I said... has been resolved.

• How to use the wait flag integrated at the level of the element during the AJAX call

  Hello
  I would like to use the integrated waiting indicator that appears next to the selection in cascade and textfields autocomplete lists in my own AJAX call. But I don't know how to attach to the question that I'm updating.
  Can someone help me in the right direction?
  
  In my case, I'm running the database to update the value of an elements to the screen. My Javascript looks like this
  

  function MY_FUNCTION
   (p_get_item1
   ,p_get_item2
   ,p_get_item3)
  {
    //create the AJAX call refering to the APEX application process
    var ajaxRequest = new htmldb_Get(null, $v('pFlowId'), 'APPLICATION_PROCESS=AP_NAME', $v('pFlowStepId'));    
    
    //put values on screen into APEX PL/SQL variables
    ajaxRequest.addParam('x01',$v(p_get_item1));
    ajaxRequest.addParam('x02',$v(p_get_item2));    
    ajaxRequest.addParam('x03',$v(p_get_item3));    
  
    //do the actual AJAX call 
    var ajaxResponse = ajaxRequest.get();   
    //and set the items on screen based on the JSON text returning  
    json_SetItems(ajaxResponse);  
  }

  Thanks in advance

  You must use jquery instead of htmldb_get to make real asynchronous, and then add the rotation like this icon

  I used the jquery post method to call the process of request here

  function MY_FUNCTION
  (p_get_item1, p_get_item2, p_get_item3) {
       //show indicator
       $('#YOUR_ITEM_NAME').after('');
  
       $.post('wwv_flow.show', {
            "p_request" : 'APPLICATION_PROCESS=AP_NAME',
            "p_flow_id" : $v('pFlowId'),
            "p_flow_step_id" : $v('pFlowStepId'),
            "p_instance" : $v('pInstance'),
            "x01" : $v(p_get_item1),
            "x02" : $v(p_get_item2),
            "x03" : $v(p_get_item3)
       },
            function (data) {
            //and set the items on screen based on the JSON text returning
            json_SetItems(ajaxResponse);
            //remove indicator
            $('#YOUR_ITEM_NAME').next(".loading-indicator").remove();
       });
  }
   
  

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• How to use the webcam

  I have an Acer laptop AS 5740, I'm useless with all the technology, can someone tell me how to use the web cam it please?

  Hello

  If it is a built-in webcam, the instructions for use of the device will vary between manufacturers.

  Your best resource for this information is Support of Acer.

  Here is a link to the product page for your computer. This page contains all the documentation for this system and devices.

  Acer support: downloads & Documents - Support Notebook / sucks / Aspire 5740:
  http://support.Acer.com/us/en/product/default.aspx?tab=2&modelId=1870

  If you cannot find the information in this location, use the following link to request to Acer.

  Acer Support - answers, E-Mail, Chat - find answers: http://acer.custhelp.com/app/answers/list

  Concerning

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• How to use the adapter wireless Satellite C660D?

  Hello world!

  Crazy us looking for the adapter wireless Satellite C660D-164... is there an integrated? or do I have to buy an external? Can not know how to set up a wi - fi and bluetooth connection. The manual is not descriptive.

  Installed all the drivers form the site.

  Pleas help ASAP.

  As far as I know all the portable toshiba have too much especially the bluetooth and WIRELESS network card.
  Use of WLAN is very simply. Thing the most important ist wireless network adapter must be installed and activated correctly.

  In the document s user manuals, you can find good description how to use the WLAN.

  The question is: do you use your laptop with the original operating system preinstalled that you got with it or you use own preloaded?

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.