How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

Similar Questions

• I am able to scan from the scanner and printer, but can't seem to scan onto computor

  I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.

  Hello

  I suggest you to update the latest drivers for the scanner\printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/323166

  It will be useful.

• My new HP laptop is running Windows 7. I want to add my printer HP LaserJet 4 L printer but can't seem to get the driver. Help!

  I was able to get the driver and the ut6ilize my HP Laser Jet 4 L printer.  Since my hard drive had to be replaced, I was not able to get the LaserJe6t from HP again 4L printer driver.  Help!

  With the help of a very knowledgeable Microsoft Tech, I was able to get the driver for my printer HP LaserJet 4 L printer.  It is listed on page 6 of 6 Iin the CATALOG.COM UPDATE from MICROSOFT.

  Hope this helps others, I know that this quest for the pilot was long and painful, but my trusty printer prints well!

  Good luck, Pat

• How can I change my size of police and style, I can't seem to be able to do this?

  I had to have windows Vista on my computer reloaded. Once all updates were caught up, I seem to have lost the ability to change my font style and size in all of my test email boxes. I mean all the emails, Yahoo, Windows mail and hotmail. It will show that I changed it but when I start to type in the body of the email it will size 12 time Roman or Verdana, which is in my hotmail. How can I fix this feature. Help, please. I'm kinda a computer dummy here. Thank you

  Hello

  If you have a mouse with the scroll button, please hold down the CTRL key and press the scroll of the mouse wheel to adjust the size of your font.  In addition, you can adjust the parameters of resolution DPI and screen.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to open a file with the extension .odg using Vista?

  How to open a file with the extension .odg using Vista?

  Hi Defiant503,

  Thank you for visiting the forums of answers.microsoft.com.

  I did some research and a file ending with .odg is an OpenDocument Document OpenOffice/StarOffice (Ver 2) of graphics by Sun Microsystems, Inc.    This means that in order to open this file, you will need this program to open it.  You will not be able to open this file with Vista.

  I hope this information helps.

  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• How a microwave oven interferes with the WIFI signal?

  MICRO-WIFI INTERFERENCE

  Please explain THAT HOW A MICROWAVE actually INTERFERES with the laptop WIFI signal...  How to turn off the oven microwave takes the PC adapter, for example?  When the microwave oven is off and don't use it, should also be disconnected? In the equipped cafes in WIFI, are microwave ovens, degrading the quality of the signal?

  I thank very you much for your comments.

  Joe

  This is caused by the fact that both microwave and most wifi routers operate at a frequency of 2.4 Ghz, there is a setting on some wifi routers that allow you to operate at 5 GHz, but this frequency moves not by walls well, insofar as they interfere, the microwave should not disseminate its frequency outside the oven microwave and most of the routers wifi broadcast in all the directions, radio waves can bounce off the walls and envelope the room and other areas as well, this isn't a line of site, so unless you have your computer very close to the microwave you should not receive any interference at all. or course, if you stick the router inside the microwave.

  Hope this helps,
  -Ray

• How to remove a step with the polygon Lasso tool

  How to remove a step with the polygon Lasso tool

  In PS, all you have to do is to hit the DELETE key and you can go back a little with the polygon Lasso tool. How to accomplish this in Fireworks?

  Another option that gives you a lot of control is to use the tool pen instead of the polygon lasso. Because it's a vector path, you can refine the outline very easily using the tools of feather and Subselects and when you are satisfied with the result, click on modify > convert a path to the top. You can even choose to keep or delete the vector path in the preferences panel.

  HTH

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• How to install firefox last with the custom network home page

  I'm trying to figure out how to do a network with the latest firefox installation, but suitable for the bringing into default homepage for the intranet portal of companies. I have several thousand computers that require installation and pushing by network is the only realistic method, but I can't find a solution on how to change the homepage for this. Help, please!

  See:

  • http://Mike.kaply.com/2012/08/29/setting-the-default-Firefox-homepage-with-AutoConfig/
  • https://addons.Mozilla.org/firefox/addon/CCK/

• How to drag a desktop with the magic trackpad icon?

  How to drag a desktop with the magic trackpad icon? It is coupled with a Mac Mini El Capitan 10.11.4 running.

  Thank you.

  Place the cursor on the icon then press on and hold and drag your finger across the surface of the touchpad.

  If problem, then check your trackpad preferences.

  Note also you maybe isn't able to move them they will break again) if other that None is selected in the sort by if you hold with two fingers and choose

• How to take a photo with the Acer Iconia W 4 820

  Hello

  Anyone know how to take a photo with the Acer Iconia W4 820 Tablet and get it back on my pc?

  hans0919

  Easiest is to copy the files with a USB key, but the most elegant (IMHO) is across the network. Just join each machine to your homegroup, and you can copy back.

• How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

  How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

  Everything you always wanted to know about the acoustics in first Pro CC - YouTube

• How to animate a line with the pen tool to give the impression that it is plotted?

  How to animate a line with the pen tool to give the impression that it is plotted?

  Or you can choose the pen tool (g), set the padding to zero and the race to what you want, then draw a path, then press U twice to reveal all of the properties that have been changed for the layer, and then click Add (top-right) and select Connect the tracks.

  To make the race work just animate the start or end point and sent to paint on original or reveal original or normal.