How to use 'with query clause"in DBadapter

Similar Questions

• ACR computers how I use with 1 CC?

  ACR computers how I use with 1 CC?

  You can install your applications on both computers. If you try to install on a third, you are asked to disable one of the other two installs. Note that you can not use both installed at the same time however.

  Hope that helps

• WITH query Clause does not work in Oracle reports.

  Hi gurus,
  
  I use a query WITH clause and want to create a report by using the same query.
  
  But when I am trying to build a report, request gives error like "WITH clause table or view does not exist.
  
  But the same query works perfectly in line of sql.
  
  Does support the Oracle WITH clause query reports?
  
  Please suggest.
  
  
  Thank you
  Onkar

  I met a similar problem before and worked around it by moving the query to a pipeline function in the database as described in the unexpected CLAUSE causes ORA-00942 in Report Builder

  I hope this helps.

• Camileo X 100-how to use with other software?

  Hello

  I have a camera video camileo x 100. Can someone tell me how to use this unit on other software rather than the CRA? Won't codec, I use vegas video 8 and I try to convert you arc soft video converter, the only problem is

  1. I don't see video without audio
  2. regardless of the profile, I chose the converter does not give me the original size I shot the video
  3. the video is really badly coded and his jumps every time I press on play or make.

  Can you recommend some sort of software where I can convert these files and always keep it without loss?

  I think that it is a terrible problem! Why do you make a camera where you can not even change freely with a versatile codec? The arc soft video demo edition is low and in my opinion it is not supposed to buy a camera with these limited edition modes

  I would be really appreciated if someone could give a suggestion for a converter that can be used!

  Thank you!

  Hey,.

  Identical or similar question already here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56484&TSTART=0

  I m X 100 not owner, but I Camileo H30 is I think its predecessor and it generates AVI video files and I can use those files with each program. Image and sound are working correctly, even the camera software is not installed.

  I don t know what Vegas Video 8 program, but normally each program can handle avi files. Also check the page of manufacturing of this video program for an update.

  I hope that helps! :)

  Welcome them

• How is used with fx i18n resources: include?

  I can't seem to get bundles of resources working with fx: include.  This old post suggests it should work, but I'm running into two different errors.  I downloaded a very simple example here:

  https://DL.dropboxusercontent.com/u/8788282/sample-app.zip

  The example has everything set up the way I expect to work.  When I open "MainView.fxml" with SceneBuilder (7 bundled JRE), I get a MissingResourceException.  When I try to run "SampleApp" using JDK8-b111 I get a NullPointerException.  In the second case, it seems that fxmlloader might be passing a null to ResourceBundle ClassLoader.

  Does anyone know how to use beams of resource with nested views?  The Introduction of to FXML. JavaFX 2.2 docs silence resources fx: includes, but does not explain how it is supposed to work.

  A possible workaround is to make sure the ResourceBundle you go to your main FXMLLoader is not loaded by the system class loader. I think that the best way to proceed is to wrap the resource group, you get in the usual way in a trivial wrapper implementation. Something like this:

  import java.io.IOException;
  import java.util.Enumeration;
  import java.util.Locale;
  import java.util.ResourceBundle;
  import java.util.Set;
  
  import javafx.application.Application;
  import javafx.fxml.FXMLLoader;
  import javafx.scene.Parent;
  import javafx.scene.Scene;
  import javafx.stage.Stage;
  
  public class ResourcesTest extends Application {
  
   @Override
    public void start(Stage primaryStage) throws IOException {
         ResourceBundle resources = new ResourceBundleWrapper(ResourceBundle.getBundle("resources.Resources"));
         System.out.println(this.getClass().getClassLoader());
         System.out.println(resources.getClass().getClassLoader());
         FXMLLoader loader = new FXMLLoader(getClass().getResource("ResourcesTest.fxml"), resources);
         Parent root = (Parent) loader.load();
         Scene scene = new Scene(root, 300, 120);
         primaryStage.setScene(scene);
         primaryStage.show();
    }
  
    public static void main(String[] args) {
         launch(args);
    }
  
   // this class effectively does nothing, but it will be loaded by the
   // application class loader
   // instead of the system class loader.
    private static class ResourceBundleWrapper extends ResourceBundle {
  
         private final ResourceBundle bundle;
  
         ResourceBundleWrapper(ResourceBundle bundle) {
              this.bundle = bundle;
         }
  
         @Override
         protected Object handleGetObject(String key) {
              return bundle.getObject(key);
         }
  
         @Override
         public Enumeration getKeys() {
              return bundle.getKeys();
         }
  
         @Override
         public boolean containsKey(String key) {
              return bundle.containsKey(key);
         }
  
         @Override
         public Locale getLocale() {
              return bundle.getLocale();
         }
  
         @Override
         public Set keySet() {
              return bundle.keySet();
         }
  
         }
  }
  

  The simplest workarounds is may be possible, but I don't see one right now...

• How to use WITH Clause of Apex classic report

  Hello.

  I use Apex 4.2.1 on mod_plsq and Oracle 11 g 3.

  I need to create a report classic usiing a WITH clause in the SQL report.  Apex keeps throwing the error 'CAN finf SELECT statement.

  I then wrapped my report query in an envelope, SELECT * clause.  Apex then raises an error you need to use a variable LONG.

  How is - a uses a WITH clause in the report query.

  Here is my report query:

  SELECT *.

  Of

  (

  WITH W

  AS

  (

  SELECT

  MIN (W1. URMT_BTRS_PK URMT_BTRS_PK),

  MIN (W1. EARLIER_NOTICE_ID URMT_NOTICES_ID),

  TO_CHAR (MAX (W1. EARLIER_NOTICE_TYPE NOTICE_TYPE)),

  TO_CHAR (MAX (W1. NOTICE_TYPE)) | '- Day' EARLIER_NOTICE_TYPE_DESC,.

  MAX (W1. LATER_NOTICE_ID URMT_NOTICES_ID),

  TO_CHAR (MIN (W1. LATER_NOTICE_TYPE NOTICE_TYPE)),

  TO_CHAR (MIN (W1. NOTICE_TYPE)) | '- Day' LATER_NOTICE_TYPE_DESC,.

  W1. NOCHG_STATUS_ORDER,

  W1. CHG_STATUS_ORDER,

  W1. ADD_STATUS_ORDER,

  W1. REM_STATUS_ORDER

  Of

  (

  SELECT

  URMT_BTRS_PK,

  URMT_NOTICES_ID,

  NOTICE_TYPE,

  : P202_NOCHG_STATUS_ORDER AS NOCHG_STATUS_ORDER,

  : P202_CHG_STATUS_ORDER AS CHG_STATUS_ORDER,

  : P202_ADD_STATUS_ORDER AS ADD_STATUS_ORDER,

  : P202_REM_STATUS_ORDER AS REM_STATUS_ORDER

  Of

  V_URMT_COMPARE_NUCLIDE_DATA

  WHERE

  URMT_NOTICES_ID IN (TO_NUMBER(:P202_COMPARE_EARLER_NOTICE_ID), TO_NUMBER (:P202_COMPARE_LATER_NOTICE_ID))

  ) W1

  )

  ------------------

  SELECT

  CASE WHEN (X.STATUS IS NULL) THEN

  CASE WHEN (INSTR(X.MASS ||)

  X.NUCLIDE_FRACTION

  ((' *', 1, 1) > 0) THEN '< div class = "chg_highlight" >' | HTF. ESCAPE_SC (' changed (' |)) (SELECT EARLIER_NOTICE_TYPE |) ' => ' || LATER_NOTICE_TYPE | ((' W)) | "< / div >"

  Else 'no change '.

  END

  WHERE (X.STATUS = 'Added') THEN ' < div class = "add_highlight" > ' | HTF. ESCAPE_SC(X.STATUS ||) "To" | (BY SELECTING LATER_NOTICE_TYPE_DESC IN W)) || "< / div >"

  WHERE (X.STATUS = 'Deleted') THEN "< div class ="rem_highlight"> ' |" HTF. ESCAPE_SC(X.STATUS ||) 'From ' | (BY SELECTING EARLIER_NOTICE_TYPE_DESC IN W)) || "< / div >"

  OF OTHER X.STATUS

  END AS STATUS

  ----

  CASE WHEN (X.STATUS_ORDER IS NULL) THEN

  CASE WHEN (INSTR(X.MASS ||)

  X.NUCLIDE_FRACTION

  ((' *', 1, 1) > 0) THEN (SELECT CHG_STATUS_ORDER FROM W)

  OTHER (SELECT NOCHG_STATUS_ORDER FROM W)

  END

  OF OTHER X.STATUS_ORDER

  END AS STATUS_ORDER,

  ----

  X.NUCLIDE,

  ----

  CASE WHEN (X.STATUS IS NULL) THEN

  BOX WHEN (SUBSTR (X.MASS, 1, 1) = ' *') THEN SUBSTR (X.MASS, 2).

  OF OTHER X.MASS

  END

  OF OTHER X.MASS

  MASS OF THE END AS,

  ----

  CASE WHEN (X.STATUS IS NULL) THEN

  BOX WHEN (SUBSTR (X.NUCLIDE_FRACTION, 1, 1) = ' *') THEN SUBSTR (X.NUCLIDE_FRACTION, 2).

  OF OTHER X.NUCLIDE_FRACTION

  END

  OF OTHER X.NUCLIDE_FRACTION

  END AS NUCLIDE_FRACTION

  Of

  (

  -THE NUCLIDES EXIST IN * TWO * BEFORE AND AFTER VIEW.  SOME OF THEIR ATTRIBUTES (MASS, NUCLIDE_FRACTION, ETC.)  MAY HAVE CHANGED.

  SELECT

  STATUS AS NULL,

  VALUE NULL AS STATUS_ORDER,

  C.NUCLIDE,

  BOX WHEN (NVL (C.A_MASS, 'Null')! = NVL (C.B_MASS, 'Null')) THEN ' *' | '< div class = "chg_highlight" >' | HTF. ESCAPE_SC (NVL (C.A_MASS, 'Null') |) ' => ' || NVL (C.B_MASS, 'Null')) | "< / div >"

  Of ANOTHER NVL (C.B_MASS, 'Null')

  MASS OF THE END AS,

  ----

  BOX WHEN (NVL (C.A_NUCLIDE_FRACTION, 'Null')! = NVL (C.B_NUCLIDE_FRACTION, 'Null')) THEN ' *' | '< div class = "chg_highlight" >' | HTF. ESCAPE_SC (NVL (C.A_NUCLIDE_FRACTION, 'Null') |) ' => ' || NVL (C.B_NUCLIDE_FRACTION, 'Null')) | "< / div >"

  Of ANOTHER NVL (C.B_NUCLIDE_FRACTION, 'Null')

  END AS NUCLIDE_FRACTION

  Of

  (

  SELECT

  A.NUCLIDE,

  TO_CHAR(A.MASS, '999.99EEEE') AS A_MASS,

  TO_CHAR(A.NUCLIDE_FRACTION, '99999.999EEEE') AS A_NUCLIDE_FRACTION,

  ----

  TO_CHAR(B.MASS, '999.99EEEE') AS B_MASS,

  TO_CHAR(B.NUCLIDE_FRACTION, '99999.999EEEE') AS B_NUCLIDE_FRACTION

  Of

  V_URMT_COMPARE_NUCLIDE_DATA, A.

  V_URMT_COMPARE_NUCLIDE_DATA B

  WHERE

  1 = 1

  AND A.URMT_BTRS_PK = B.URMT_BTRS_PK

  AND A.NUCLIDE = B.NUCLIDE

  AND A.URMT_BTRS_PK = (SELECT URMT_BTRS_PK FROM W)-TO_NUMBER(:P202_URMT_BTRS_PK)

  AND A.URMT_NOTICES_ID = (SELECT EARLIER_NOTICE_ID FROM W) - TO_NUMBER(:P202_COMPARE_EARLER_NOTICE_ID) - PRIOR NOTICE (EXAMPLE: 30 DAYS)

  AND B.URMT_NOTICES_ID = (SELECT LATER_NOTICE_ID FROM W) - TO_NUMBER(:P202_COMPARE_LATER_NOTICE_ID) - FURTHER VIEWS (EXAMPLE: 7 DAYS.)  NOTE: PRIOR NOTICE IS COMPARED WITH OPINIONS LATER, FOR EXAMPLE, 30 DAYS IS COMPARED TO 7 DAYS)

  ) C

  UNION

  -ADDED NOTICE LATER NUCLIDES.  THEY DO NOT APPEAR IN THE EARLIER OPINION.

  SELECT

  "Added" AS the STATUS,

  (BY SELECTING ADD_STATUS_ORDER IN W) AS STATUS_ORDER,

  A.NUCLIDE,

  TO_CHAR(A.MASS, '999.99EEEE') AS A_MASS,

  TO_CHAR(A.NUCLIDE_FRACTION, '99999.999EEEE') AS A_NUCLIDE_FRACTION

  Of

  V_URMT_COMPARE_NUCLIDE_DATA HAS

  WHERE

  1 = 1

  AND A.URMT_BTRS_PK = (SELECT URMT_BTRS_PK FROM W)-TO_NUMBER(:P202_URMT_BTRS_PK)

  AND A.URMT_NOTICES_ID = (SELECT LATER_NOTICE_ID FROM W)-TO_NUMBER(:P202_COMPARE_LATER_NOTICE_ID)

  AND NOT EXISTS

  (SELECT NULL

  OF V_URMT_COMPARE_NUCLIDE_DATA B

  WHERE B.URMT_BTRS_PK = A.URMT_BTRS_PK

  AND B.NUCLIDE = A.NUCLIDE

  AND B.URMT_NOTICES_ID = (SELECT EARLIER_NOTICE_ID FROM W)-TO_NUMBER(:P202_COMPARE_EARLIER_NOTICE_ID)

  )

  UNION

  -DELETED THE PREVIOUS NOTICE NUCLIDES.  THEY DO NOT APPEAR IN THE NOTICE LATER.

  SELECT

  'Removed' AS the STATUS,

  (BY SELECTING REM_STATUS_ORDER IN W) AS STATUS_ORDER,

  A.NUCLIDE,

  TO_CHAR(A.MASS, '999.99EEEE') AS A_MASS,

  TO_CHAR(A.NUCLIDE_FRACTION, '99999.999EEEE') AS A_NUCLIDE_FRACTION

  Of

  V_URMT_COMPARE_NUCLIDE_DATA HAS

  WHERE

  1 = 1

  AND A.URMT_BTRS_PK = (SELECT URMT_BTRS_PK FROM W)-TO_NUMBER(:P202_URMT_BTRS_PK)

  AND A.URMT_NOTICES_ID = (SELECT EARLIER_NOTICE_ID FROM W)-TO_NUMBER(:P202_COMPARE_EARLER_NOTICE_ID)

  AND NOT EXISTS

  (SELECT NULL

  OF V_URMT_COMPARE_NUCLIDE_DATA B

  WHERE B.URMT_BTRS_PK = A.URMT_BTRS_PK

  AND B.NUCLIDE = A.NUCLIDE

  AND B.URMT_NOTICES_ID = (SELECT LATER_NOTICE_ID FROM W)-TO_NUMBER(:P202_COMPARE_LATER_NOTICE_ID)

  )

  ) X

  )

  I have searched this forum for clues but found nothing.

  Any help would be appreciated.

  Thank you.

  Elijah

  EEG wrote:

  I'll now try to place my report within a packaged procedure, and then run it from there.  You don't love doing cela, but seem to don't have is not a choice.

  Elijah

  Huh?  How can you put a SELECT statement in a procedure?  you return a cursor reference?

  You create VIEWS.  You have three sections.  Give an opinion on each of them.  Test them with SQL Developer (or SQL * more)

  Build from there.

  In fact, it looks like you are trying to compare two tables"and return a DIFF

  THINKING IN SETS

  Use the WITH clause to build a 'virtual' table for EARLIER_NOTICE and a 'virtual' table for LATER_NOTICE.

  Use FULL OUTER JOIN to compare the two.

  THE FORMAT OF THE EXAMPLE:

  select * from (
  with w as ( .... )
  ,table_A as ( -- build the Virtual Table for EARLIER_NOTICE
  SELECT *
   FROM
   V_URMT_COMPARE_NUCLIDE_DATA A1
     join W on (A1.urmt_btrs_pk, W.urmt_btrs_pk  and A1.earlier_notcie_id=W.earlier_notice_id)
  
  --  old code
  -- WHERE
  -- 1 = 1-- why???
  -- AND A.URMT_BTRS_PK     = (SELECT URMT_BTRS_PK FROM W)    --TO_NUMBER(:P202_URMT_BTRS_PK)
  -- AND A.URMT_NOTICES_ID = (SELECT EARLIER_NOTICE_ID FROM W)   --TO_NUMBER(:P202_COMPARE_EARLER_NOTICE_ID)
  ,table_b as ( -- build the Virtual Table for the LATER_NOTICE
  
   select *
   from
  
   V_URMT_COMPARE_NUCLIDE_DATA B1
     join W on (b1.urmt_btrs_pk = W.urmt_btrs_pk  and b1.urmt_notice_id=W.later_notice_id)
  )
  
  --/*** NOW - WE COMPARE THE TWO ***/
  select CASE
      when A.urmt_btrs_pk is null then 'ADDED'
      when B.urmt_btrs_pk is null then 'DELETED'
      else 'possibily updated'
  end CHANGES_MADE
    , A.*
    , B.*
  
  FROM TABLE_A A FULL OUTER JOIN B
  ON (
   A.URMT_BTRS_PK = B.URMT_BTRS_PK
  AND A.NUCLIDE = B.NUCLIDE )
  

  
  

  
  

  
  

• How to use several query string in a URL?

  Can someone help me with the use of more than a query string in a URL?  I would like to pass on the details of the campaignID (for the CLR) and industry (redirect after form submission) with a click of an email to a landing page.

  Thank you very much

  Alan,

  There are two posts really great on this topic that should help you get there quite easily.

  First, take a look at the position of glreichertof EE12. EE12 - Do-It - Thomson Reuters - Super power of blind forms

  Then visit chorenfto post on the blind forms. Eloqua10: trigger multiple actions with a click-through email (via 'send blind form')

  I have these two positions of reference whenever I need an update on query strings and always answers my questions.

  Good luck.

  Krista

• How to use with my Satellite A300 safety lock?

  Hello.. I found the manual book of the user of my toshiba and I saw something iteresting. There are "safety lock". I hadn't used before, I want to use now, but I don't have its operation.

  Can someone tell me more about this? Thanks :)

  Hello

  More information on this topic, you will find under
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=445936
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=298207

  It's nice to lock your laptop. Meet information where you can order such padlock with computer cable.

• Expression.Evaluate () - how to use with propertyobject?

  Hello

  I have the code in a reminder of model of process and would like to evaluate an expression in the context of Runstate.Caller.

  I found the method

  Expression. Evaluate (evaluationContext, evaluationOptions is EvalOption_NoOptions)

  That's exactly what I need. However, if I have a CallingStep.Expr, which is an expression, I can't access the Evaluate() function. It is not available, only the functions PropertyObjects are.

  How can I throw it's an Expression, so I can access the function Evaluate?

  I really I could do:

  Runstate.CallingStep.Expr.Evaluate (Runstate.Caller, 0x0)

  This returns the expression evaluated in the context of the appellant as a PropertyObject.

  But this isn't the case, need me something to TS know Runstate.CallingStep.Expr is an Expression... even if I add it to the Panel of the watch, it shows that it is an expression...

  Thank you.

  Hello

  Try to use RunState.Caller. AsPropertyObject. EvaluateEx (xxx)

  Hope this helps

  Jürgen

• How to use the query xml in as3

  What follows is the result of the motion preset xml export.

  < motion duration = "1" xmlns="fl.motion. * ' xmlns:geom=" flash.geom. * ' xmlns:filters="flash.filters. * '>

  < source >

    < source frameRate = "24" x="449.5" y="138.55" scaleX="1" scaleY="1" rotation="0" elementType="movie clip" instanceName="ball" symbolName="ball">

  < size >

    < geom: Rectangle left="-51.5" top="-51.5" width="103" height="103"/>

  < / size >

  < transformationPoint >

    < geom: Point x="0.5" y="0.9956310679611651"/>

  < / transformationPoint >

  < / source >

  < / source >

  <Keyframe index="0"/>

  < / movement >

  
  

  can someone show me how the as3 in flash script should be to put the motion to my mc "ball" in the fla?
  

  You cannot use a string.  Use the movieclip, evt.target not evt.target.name.

  (p.s when you use the adobe forums, check useful/correct, if there is.)

• HOW TO USE THE CONNECT_BY CLAUSE

  Hi guys... I have a table like this
  
  create table emp_del (ename varchar2 (10), mname varchar2 (10))
  Insert into emp_del values ('ABC', 'MNO')
  Insert into emp_del values ('MNO', 'XYZ')
  Insert into emp_del values ('XYZ', 'king')
  Insert into emp_del values ('king', NULL)
  
  I use this sql to return the name of any employee senior...
  
  SELECT SYS_CONNECT_BY_PATH (MNAME, '-->') "MANAGER_NAME".
  OF EMP_DEL
  CONNECT PRIOR MNAME = ENAME
  START BY ENAME =: P_EMPLOYEE_NAME
  
  ex: ename = ABC
  released as: - > MNO
  -> MNO-> XYZ
  -> MNO-> XYZ-> King
  -> MNO-> XYZ-> king - >
  
  I just need the output to be-> King
  
  can you guys help me

  One way:

  select ename
  from(
    select e.*,connect_by_isleaf lf
    from emp_del e
    connect by prior mname=ename
    start with ename=:P_EMPLOYEE_NAME
    )
    where lf = 1
  

  Note: it can be simplified as below, just used a subquery to understand...

  select ename
  from emp_del e
  where connect_by_isleaf = 1
  connect by prior mname=ename
  start with ename=:P_EMPLOYEE_NAME
  

• How to use this query in oracle?

  Hi Sir,
  
  I use a SQL query that is
  
  declare @date date ='2012-10-25', @date1 varchar (5)
  Set @date1 = DATEPART (W, @date)
  impression @date1
  
  that its value means day 25 oct 5 back Thursday it is checking and counting from Sunday in this week so the result is 5 next.
  
  and storing in @date1
  
  the same result I want in oracle.
  
  Thank you

  Try this...

  /* Formatted on 10/5/2012 10:22:34 AM (QP5 v5.163.1008.3004) */
  SELECT TO_CHAR (TO_DATE ('2012-10-25', 'yyyy-mm-dd'), 'D') FROM DUAL;
  

  gives

  5
  

  HTH
  Vanessa B.

• Expl 9 command bar icon Mail how to use with outlook?

  I have win 7, CPH 9. When I try to use the mail icon I get: not properly installed default e-mail client.  ?  Is there a solution?

  Hi Lelandw,

  The error message you get is either because the default mail client program is not yet set on the computer, or maybe it's because the default mail client you defined is not working properly.

  If you want to set the Microsoft Outlook program as the program on the computer's default e-mail client, you can do that by referring to this article:

  Change the programs that Windows uses by default

   

  For more information, you might also need to a look at this article:

  Change default programs using Set Program Access and computer defaults

  Hope this information is useful.

• How can I use join query ANSI in Forms 10 g

  Dear all,

  How I use the query as mentioned below in Forms 10 g

  SELECT <fields>  
    FROM TableA a INNER JOIN TableB b ON a.key = b.key
  

  Kind regards

  Zafar Iqbal

  You cannot use the SQL commands that did not exist in the 8.0 database.

  Oracle Forms (and reports) has a full PL/SQL engine and (only) the SQL parser.

  However, form (and reports) PL/SQL engine / SQL parser is at a level that was in the Oracle 8.0 database.

  Kind regards

  Zlatko

• with the use of the clause in the cursor

  is it possible to use with the clause in the cursor declaration.
  
  See the simple example below.
  
  It gives an error.
  
  
  
  declare
  
  cursor t is
  
  (with Salvation as
  
  (select * from pepole)
  
  
  Select distinct hi.id of salvation where id = 55);
  
  
  Start
  
  
  null;
  
  
  end;

  Remove the outdoor set of parentheses.

  declare
  
  cursor t is
  with hi as
  (select * from emp )
  select distinct sal from hi;
  begin
  null;
  end;