Re: Satellite P300 start

Similar Questions

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• Windows does not start on my Satellite P300

  Hi all

  I have a problem with my Toshiba Satellite P300-22R.
  When I start the PC, the normal start screen comes (Toshiba Leading Innovation) I can also launch the BIOS and all the stuff. But now nothing works again! I'm still in this screen, Windows will not start and when I press F2 I don't come to the BIOS. Can you help me?

  Thank you and best regards

  Angelo

  Start your laptop and press F8 to display the advanced startup options. To start Windows in safe mode, try to please.
  Send comments.

• Problems with my satellite P300 - 15 ° C to start after the upgrade to windows7

  After that I installed windows 7 on my laptop Toshiba Satellite P300 - 15 c every time I start my laptop it gives me an error until I get home the log on screen with my user account.

  He says the following:

  Microsoft C++ Runtime Library

  This application has requested the execution in an unusual way.
  For more information, contact the application support team.

  I can press OK or closing 'X' top right of the window. When I push one of these buttons several times (any one it seems) my phone enters the login screen correctly.

  However, naturally I'm not really satisfied with this condition to my laptop. Advice how can I solve this problem?

  Thanks in advance,

  Heuts

  Work for an answer please.

• Re: Could not start the camera on Satellite P300

  I have a Satellite P300 and I use Windows Vista. In recent weeks one have a problem starting the camera. I always get the message

  CEC_Main.exe does not work

  I need help.

  Thank you

  Have you tried to reinstall the webcam software?
  Latest version, you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp-

• Re: Bios won't start on Satellite P300

  Hi, on my Satellite P300 does not start Bios.
  How can I restore factory settings?

  Hello

  I m afraid. I put t understand what you mean exactly
  You are not able to access the BIOS?

  You want to reinstall the OS and want to set the laptop to factory settings?

  If Yes, then try to boot from the DVD of recovery (if created).
  If you have n t try a recovery DVDs start the installation from the HARD disk.
  The new laptops HARD drive recovery and you should be able to reinstall the OS by pressing the F8 key-> choosing fix my computer-> Toshiba Recovery

  This should launch the installation of the HARD disk

  Check

• Satellite P300-156 won't start or by MAIL

  Hello

  I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.

  I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)

  Any help would be greatly appreciated

  Thank you

  Did you update the BIOS or something?
  For me, this is a normal behavior when the BIOS chip is faulty.

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• Satellite P300 - blinking icon to the Start button and the gel

  My high school daughter years showed me his homework in WORD was starting to show different symbols flashing all the time on the page. I suggested she reboot Satellite P300 - 01, and since then, we have not been able to go beyond the base of office.
  The Start button (or office) flashes continuously and we cannot enter in all programs at all.
  I'm very grateful for any assistance.

  The P300 is only 2 months old.

  Hello

  Believe me, it is really not easy to say what is happening with this laptop. as a first step, you can try to start Notepad using F8 and enter safe mode.

  If these will be works, start System Restore utility and attempt to restore the operating system on time earlier. Perhaps one day before all this began. I hope that you will be able to use it again as before.

  If this isn't the case, please let us know.

• Cannot start the Satellite P300-1FN - nothing happens

  Hi all

  I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.
  I blocked some drivers and updates, then it prompted me to restart.

  I turned it off and left while I had lunch, then tried to start and nothing happened.
  I mean nothing, not even the power led comes on. I put the battery in which I know has at least half a load and nothing.

  The fuse, still nothing changed. What is everything?
  It is quite dead.

  Any help appreciated.

  G

  > I mean nothing, not even the power led lights up.
  Sounds not good man

  Sounds like the motherboard or CPU problem because no s lights are on.

  But try this;
  Unplug the power adapter, remove the battery, wait some time (2-4 hours) and reconnect the two parts.
  Check if you could power the unit in place.

  If this is not possible then I would recommend contacting a professional technician to ASP.

  Sorry, but that's all I can suggest

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Problems starting with Satellite P300 - 19K

  I have a portable Satellite P300 - 19K 1 month.

  Several times since I got it when I booted my system and got the password to logon windows my screen became a series of coloured horizontal lines and the Hung system completely. The only solution was to close by holding power button for 5 seconds. Screen start then on reboot that I would get in the trunk, but that did not work. Then, I learned that if I use the F8 key just I hit the power button I can get into a lot of upgraders and I was able to recover using the restore system but every time I lose a few programs that I need to reinstall.

  What has now happened 4 times in a month and becomes boring. I downloaded the latest display driver for the display of my card ATI Mobility Radeon HD 3650, but when I went to install it I learned the version I have on board is the same and everything is beautiful.

  Someone had something similar or have a solution?

  Hello

  If this happens with own pre-installed Vista (factory settings), please contact the nearest service provider and ask for help.
  Please do not test with some additional drivers. It WILL work properly with the factory settings.
  Addresses and phone numbers for ASP you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!