How to value for selectOneChoice

Similar Questions

• Setting default value for selectOneChoice when the Page loads

  BPM JDev 11.1.1.5.0
  
  I have a selectOneChoice component bound to a BPM data control. You need to set a specific value as the default value when the page is loaded for the first time.

  I did the scope of the bean managed as pageFlowScope.
  Then created a variable of string in the bean called 'postal code' and its setter I wrote like:

  You can follow this approach as well. But when you call the countryCode setter? You must set the value of the variable string.

  Then, I used your code in the jspx page.

  You need to edit my code in the jspx you use a managed bean. The code will change as below.

  I was suggesting to use a variable of pageFlowScope as defined in my previous code snippet. And on pageload, set this variable. To find out how to write/execute java code before page loads refer to this post:
  http://www.baigzeeshan.com/2011/05/How-to-run-Java-code-on-every-page-load.html
  In the afterPhase of the post method, you can set the variable pageFlowScope as shown below.

  AdfFacesContext.getCurrentInstance().getPageFlowScope().put("countryCode", "IndiaIN");
  

• How to value for the default text setting is all

  Hey all

  I have a requirement they want a parameter on the article number,

  This parameter as text and field as the default value as

  I tried everything but nothing doesn't work, is it possible? If so please guide me what I'm missing or hurt

  Thank you

  Yes, this can be done.

  You must handle this in your SQL code. Here is an example

  Approach 1:

  -----------

  Definition of parameter in your data model: P_ITEM_NUM

  Data type of parameter/type: text/string

  The parameter default value: white

  In the SQL: where ITEM_NUMBER = NVL(:P_ITEM_NUM,ITEM_NUMBER) - ITEM_NUMBER here is your database column

  At runtime, if no value is given for article number parameter - the NVL function will consider the incoming value with null and it will run the report for all values of report item.

  Approach 2:

  -----------

  Everything is the same as 1, except the default approach.

  The default parameter value: all the

  In this case, your SQL must DECODE statement

  Where ITEM_NUMBER = DECODE(:P_ITEM_NUM,'All',ITEM_NUMBER,:P_ITEM_NUM) - it's like an IF statement

• How to value for the variable user massively

  Hello world
  
  Is it possible to massively value variable user, for example the currentVersion value variable user as 'Work' for all users instead of setting a preference?
  
  Thank you very much
  Van Huy.

  It kind of defeats the object if you want to set a user variable in the world and perhaps a substitution variable can be a better option.
  In any case, one option is to export the LCM user preferences, update the output and then import them into.
  If you want to take the risk of piracy tables then look at HSP_USER_VARIABLE_VALUE, HSP_USER_VARIABLE and HSP_OBJECT

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How the value for several variables using a single guest

  Is there a way to put more than one variable with a single guest?
  for example, the value @CurrentYear and @PasteYear using just a single guest for @CurrentYear.
  
  A clue?
  
  Thank you
  
  Luke

  Using variables to repository you can set like this.
  Check this link http://gerardnico.com/wiki/dat/obiee/set_variable

  If brand pls help

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• How to reset the value of selectOneChoice when it is af:table

  12.1.3 Jdev

  I need to reset the selectOneChoice of the first empty value when you click a Refresh"" button.  The selectOneChoice is located in one of the columns of af: table.  I tried to reset by getting the selectOneChoice component and set the value to «»   Please see the snipplet of code for more details. However if the selectOneChoice is not within the af: table, then using the same way to reset works!

  in jspx

  	"< af:commandToolbarButton id ="ctb15"icon="/images/refresh_qualifier.png "shortDesc ="Refresh"action =" #{viewScope.backing_requestOverview.onRefresh} "partialSubmit ="false"> < / af:commandToolbarButton >"
  	< af:table value = "#{bindings." ItasTaskAssigneesListVO1.collectionModel}. var = "row". lines = ' #{bindings. " ItasTaskAssigneesListVO1.rangeSize}. emptyText = "#{bindings." ItasTaskAssigneesListVO1.viewable? "{'No data to display.': 'Access Denied.'}". fetchSize = "#{bindings." ItasTaskAssigneesListVO1.rangeSize}. rowBandingInterval = '1' id = 't4 '. styleClass = "AFStretchWidth."

  columnStretching = "column: c1.

  rowSelection = 'single '.

  selectionListener = "#{bindings." ItasTaskAssigneesListVO1.collectionModel.makeCurrent}.

  selectedRowKeys = ' #{bindings. " ItasTaskAssigneesListVO1.collectionModel.selectedRow} ">"

  < af:column id = "c6" headerText = "Action".

  rendering = "#{bindings." EventLevelTypeCode.inputValue! ' = ' 10 G ' & amp; & amp;! viewScope.backing_requestOverview.isReadOnly} ">"

  < af:selectOneChoice id = "soc2".

  autoSubmit = 'true '.

  valueChangeListener = "#{viewScope.backing_requestOverview.onChangeMyPendingAction} '"

  Disabled = "#{!}" line. TaskActionEnabled} ">"

  < f: selectItems value = "#{backing_requestOverview.actionsMap [row." StatusUid]} ".

  ID = "si3" / >

  < / af:selectOneChoice >

  < / af:column >

  < / af:table >

  < af:selectOneChoice id = "soc222" >

  < af:selectItem label = "Complete"

  value = "COMPLETE"

  ID = "si4" / >

  < af:selectItem label = "Assign".

  value = "ASSIGN".

  ID = "si555" / >

  < / af:selectOneChoice >

  Java bean:

  public String onRefresh() {}

  RichSelectOneChoice actionDropdown = (RichSelectOneChoice) JSFUtils.findComponentInRoot ("soc2");

  actionDropdown.setValue("");

  RichSelectOneChoice actionDropdown2 = (RichSelectOneChoice) JSFUtils.findComponentInRoot ("soc222");

  actionDropdown.setValue("");

  If (actionDropdown! = null) {}

  AdfFacesContext.getCurrentInstance () .addPartialTarget (actionDropdown);

  }

  If (actionDropdown2! = null) {}

  AdfFacesContext.getCurrentInstance () .addPartialTarget (actionDropdown2);

  }

  }

  Please notify.

  Thank you

  -Mina

  The root of the problem remains the same. As long as you don't set a value for each of SPC property that you use, you cannot reset them without running into trouble.

  An soc within a table must be stored too, you must provide the form of attribute value each of them. If you only use a soc, to distinguish the action to take, it belongs in the table.

  Timo

• How can we formulize a threshold value for the maximum number of connections for LDAP?

  Hi all
  
  We use Sun one DS 5.2 on the Solaris platform.
  
  How can we define the value for the attribute config "nsslapd-maxconnections" because it depends on allocaated for each process's file descriptors.
  If you please also correcct me if the above statement is false.
  
  Thank you.

  Hello

  This attribute can be used to limit the number of simultaneous client connections slapd can handle. The main goal is to Cap slapd memory usage.
  By default, this limit is undefined, so slapd can handle up to the number max allowed for the slapd process file descriptor.

  Use only when necessary. You can use the ulimit command to get the limit of the OS settings.

  -Sylvain

• Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Hi Bob

  I think that you have found the solution but if still you are facing the question, please give me the url of the site that opens another provision in the tablet.

  Please make sure desktop redirection is checked in the site properties page layout.

  Thank you

  Sanjit

• How to go from sysdate as the initial value for reports?

  Hi, I am using Oracle 10 G reports. I would like to know how to pass sysdate as initial value for the property of a date in the parameter element user. Help, please. Thank you

  arms777 wrote:
  I want to say is, if you select range of property for the specific parameter, there is a property for the initial value (type of data, width, mask entry, initial value, Validation trigger, list of values, etc.). Does this mean that I can just put sysdate on the initial value of the parameter property? I really need to use a trigger for this? In forms, I don't have to create a trigger to do this, simply put sysdate on the initial value of the item property. I hope you understand what I mean. Thanks again.

  I can't find another way...

  This from Reports FAQ
  How to set the initial values of the parameters to the form of the parameter at run time? +

  This is what is mainly used for BeforeForm relaxation. Even if you used a select statement to create a search list for the parameter, this statement is completely parsed before the form parameter is opened. Simply assign the parameter to a value in the trigger BeforeForm will choose this option as a default value displayed to the user. For example, suppose you have a parameter called p_input_date that is intended to contain a date of the invoice. The following example will select the date of the most recent invoice being the default and notes that it correctly handle exceptions to ensure that the report does not arbitrarily die if this default setting fails. Also note that, as all the triggers of report, it should return a true or false value.

  function BeforePForm return boolean is
  begin
  select max(bill_period_end_date + 1)
    into :p_input_date
    from billing_period
   where bill_period_end_date <= (select trunc(sysdate)
                                    from dual);
    return (TRUE);
  exception
    when others then
       :p_input_date := null;
       return true;
  end;
  

  If someone useful or appropriate, please mark accordingly.

• How to list the numbers in the list of values for a url parameter IRIN/filter

  Hello
  
  I'dl likes to call it the Apex interactive report with filter IRIN parameter page in the URL
  to get the report to get a list of the IDS of the action.
  
  When the filter looks like IRIN_ACTION_ID:189353, I get the report for action_id = 189353 correctly.
  However, the point would be to get the report for a set of values action_id, but I am struggling to find the format how to list more worth action_id to achieve the desired result.
  
  
  It works, gives what I expect:
  http://../pls/Apex/f?p=999:916:1087915793180497:CIR:IRIN_ACTION_ID:189353
  
  These formats do not work, here, I'm trying to get the action_id report IN 189353,19004
  http://.../pls/Apex/f?p=999:916:CIR:IRIN_ACTION_ID:189353 %2C 190043
  http://.../pls/Apex/f?p=999:916:CIR:IRIN_ACTION_ID:189353, 190043
  
  Action_id = 190043 is not included in the report that there is.
  
  Please can someone confirm how the values of type numbers must appear in the URL for the IN operator?
  
  Thank you very much
  Lajos
  
  Published by: lvarady on 10-Sep-2011 06:39

  The way to proceed is to encapsulate all the values passed within backslashes. Like this: \189353,190043\

  Passing in your url and it has all the great work!

• How to select the default value for a choice of selection when page.jsff load

  Hello everyone, I am newbie have little problem
  
  I have problem with soc (selectOneChoice)
  in this case I ' to select the default value of af: SelectOneChoice (select first selectItem) when the page is finished loading
  
  < af:selectOneChoice label = "" Jenny Bahan: "id = 'soc1'"
  autoSubmit = 'true '.
  valueChangeListener = "#{WHStockSetReleaseBean.cekJenisBahan} '"
  Binding = "#{WHStockSetReleaseBean.v_jenisBahan}" >
  * < af:selectItem label = "GBB" value = "GBB" id = "si2" / > * = > i'want to select this value for the default (select first selectItem)
  < af:selectItem label = "GBP" value = "GBP" id = "si1" / >
  < / af:selectOneChoice >
  
  If someone help me to solve this problem
  
  THX
  agungdmt

  Hello

  try to set the attribute value to af:selectOneChoice like that.

  Kind regards
  Sicard.

• Default value for af:selectOneChoice

  Hello
  
  I have the selectOneChoice on my screen...
  

  < af:selectOneChoice label = 'Target' id = 'socTarget'

  > value = "#{pageFlowScope.DefaultPreventMB.queryCriteria.selectedTarget} '"
  > visible = "#{pageFlowScope.DefaultPreventMB.visibleTarget} '"
  > styleClass = autoSubmit 'fieldHeight' = 'true '.
  > shortDesc = "shows the subset of borrowers that a school wants to 'target' of their communication to the."
  > partialTriggers = "socAction socSchool".
  > valueChangeListener = "#{pageFlowScope.DefaultPreventMB.selectedTargetValueChangeListener}" >
  * < af:selectItem label = 'Offender Active cohort' value = 'DAC' id = 'si71' / > *.
  * < af:selectItem label = 'All offenders' value = "DA" id = "si81."
  *rendered="#{pageFlowScope.DefaultPreventMB.visibleDelinquentAll}"/ > *.
  * < af:selectItem label = 'Each borrower' value = 'IB' id = 'si91' / > *.
  > < / af:selectOneChoice >
  
  This choice of a selection, I have 3 select assigned static elements. And I want to default to what a choice selection of "* offender Active cohort." Because right now, all the time when page load I see a blank space in a first time in this select one option and 3 static elements are below it. But we do not want an empty string at the top, instead, we want to show the "* offender Active cohort." Please let me know if anyone of you knows.
  
  Thanks for your time.
  
  Kind regards
  Kiran kristelle
  
  Published by: KKONJETI on July 14, 2010 11:20

  Hi Kiran,

  expression(#{pageFlowScope.DefaultPreventMB.queryCriteria.selectedTarget}) EL bound to the value property of selectOneChoice may not have a value, due to which it displays blank as default. If you want to "Delinquent Active cohort" to be the default value for queryCriteria.selectedTarget must be the default value set to "DAC".

  Jean Lou

• How can I display the display value for an element of lov in another area

  My page has a few elements that allow the user to select specific criteria for their report.
  pn_person - select point based on lov. Lov shows the name of the person and returns the code of the person in pn_person
  
  When the user has made their choice, they press a button that the report is generated.
  
  I want to do is show the display value for one of the search fields in the title of the report (for example, person_name) region. I think to do that I need to create a (hidden) pn_person_name point, then I put & pn_person_name. as a region
  
  However, how can I get the value of pn_person in pn_person_name display?
  
  I thought that apex_item.text_from_lov, but don't know how to use it - what elements (types), the calculations / process I need to create...
  
  THX Caron
  
  Published by: user11267129 on January 7, 2010 15:01
  
  Published by: user11267129 on January 7, 2010 15:02
  
  Published by: user11267129 on January 7, 2010 15:02

  Caron:

  You can use javascript to set the value of 'pn_person_name' to display the LOV selection value.
  Set the form field HTML to the elements attributes for the element of selection as list page

  onchange=$s('PN_PERSON_NAME',this.options[this.selectedIndex].text)
  

  CITY

  Published by: city has on January 7, 2010 17:22

• How to read or get the current selected value of selectonechoice

  How to read or get the current selected value of selectonechoice, so that it can be used in the custom query.
  
  selectOneChoice11.getValue () m:System.NET.SocketAddress.ToString () returns the index of the list.
  
  from 0 - number of values in selectonechoice.
  
  I want to read the exact value of selected.
  
  Concerning
  
  Niaz M

  Why don't you try this?

  Re: Value of SelectOneChoice in valueChangeListener

  Both approaches will work...

  Julian