How to work the Optimus compared to VMware Workstation 8 with enable 3D

Similar Questions

• How to locate the location of a VMware Workstation v10.0.3 vmdk readers when stereotypes are present.

  Re: How to find the location of a VMware Workstation v10.0.3 vmdk readers when stereotypes are present.

  Hello

  Since nearly five months, I have worked on a particular project and am reviewing me with the details of the project. The virtual machine has three virtual disks. I remember the BONES of the virtual machine as well as the first disc of the vmdk virtual machine data files are in the Windows host file containing the virtual machine. Nothing unusual so far. I remember that I put the third disk of the virtual machine on my axis f: physical, but I want to make sure that before you start again work on the project.

  I see of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003880 we should be able to examine the vmx file and see the locations of virtual disk. What I've noticed, is that since I was a snapshot, I see this:

  scsi0:2.present = 'TRUE '.

  scsi0:2.filename = "MyProject-Disk3 - 000001.vmdk".

  So what I see in the vmx is the physical location of the disk snapshot delta and not the physical location of the vmdk.

  I also did a search for vmware vmdk files - x.log and I find:

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-DSCPTR: open [0]: "sample - Disk3.vmdk" (0xe)

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-LINK: opened 'F:\MyProject-Disk3\MyProject-Disk3.vmdk' (0xe): monolithicSparse, 83886080 sectors / 40 GB.

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-LIB: open 'G:\VMware VMs\MyProject\MyProject-Disk3-000001.vmdk' (0xa, type monolithicSparse flags).

  So by brute force, I discovered that the parent for the VM Disk3 vmdk is the physical disk F. And even here, the only reason why I know that I have the right VM disk, because I included "Disk3" in the VM disk naming convention that I used.

  But what happens if I hadn't used a physical VM disk naming convention which did not include the name of the virtual disk of the virtual machine? How could 100% sure that the third disk of my VM was the vmdk parent that I had located on the physical disk F?

  There must be an easier way to do this for days just like that.

  I look forward to your reply.

  Kind regards...

  P.S. I noticed that if I close this virtual machine and click on the 3 hard drive (SCSI), it only shows the name of the file of the virtual delta "MyProject-Disk3 - 000001.vmdk" machine and not the parent vmdk.

  P.S. I noticed that if I close this VM and try using the disk utilities, the map shows that the path to the file delta 'MyProject-Disk3 - 000001.vmdk' and the parent vmdk.

  Virtual disk snapshot files have the file name of the virtual disk parent included in the file descriptor hard (text file), or in the hard data file according to the format of the virtual disk. In the case of a monolithic virtual disk format (i.e. a hard single file), you may need to use a hex editor to find the 'parentFileNameHint' somewhere between 0x200 and 0x400.

  André

• I'm stuck on my blackberry torch smart phone blackBerry. How to find the password? I had 6 attempts, with remaining 4.

  I'm stuck on my blackberry of the flame. How to find the password?  I had 6 attempts, with remaining 4.

  Can you be more specific on what kind of password is ask?

  On what screen?

• How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Mr President.

  How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Concerning

  Normally at the height of the table control you need property autoheightRows -1 and then set height in the table like this inlinestyle

  height: 300px;

• Cannot turn on the virtual machine in VMware workstation

  Hello

  I have windows 2008 stocked VM of windows 4.1.Inside ESX VM 2008 I installed VMware workstation and created the virtual machine in vmware workstation. When I have tride to power on the VM iam getting error below. Please help me.

  "Running vmware workstation in a virutal machine requires external thr virtual machine is configured to run the vmware esx host operation system.you may not power on a vierutal machine until the external virtual machine is reconfigured.

  Thank you

  Victor

  This is the VM vmx nested - you must add this line to the external virtual machine - one who runs in ESXi

• How to create the BC4J Package in JDev 10 g (with OAF)?

  How to create the BC4J Package in JDev 10 g (with OAF)?
  
  I use JDev 10.1.3.3.0 with Extension OA release 12.0.6. Right-click on the project of the new option Business Package of components is missing, I tried the business components of the Tables option but could not continiue as steps in the tutorial have does not match this wizard individual. I read on this forum that you can use this option to create the EOs and your and then specify packages later.
  
  Any help will be appreciated. The tutorial that I'm following is the Oracle Application Framework (tutorials) the JDevDoc\Index.html Toolbox
  
  Thank you
  Vijay

  Hello

  Tutorial is not being updated, Jdeveloper 10 g, there is no need to create the BC4j package explicitly, you just create AM OT or VO and mention the name of package, JDeveloper will take care rest of things, create new your EOs

  Right-click on the project--> New--> business components ADF (under the enterprise level)---> Module object/Application/view of object entity.

  Thank you
  Pratap

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to work the optimization backup and the backup retention period?

  I'm a little confused on how these 2 features will work together.
  
  Incase I enabled optimization backup and have retention backup value someday. Then I have this tablespace 'users', which is read-only. Please let me know if my understanding is correct.
  
  Date................ Action................................ Backup
  -----
  Monday... Full backup... 'users' saved
  Tuesday... Full backup... 'users' unsaved
  Wednesday... Delete Obselete... backup 'users' deleted
  Thursday... Restore database...?
  
  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted?

  Hello;

  Someday - the retention value, it is much too low. You may lose more than your example of demand. Set the highest. (Start with 2 or 3 and test, test, test)

  How backup works of optimization in what concerns the retention policy?

  RMAN only works with files during the retention period.

  For example, consider a backup optimization with a retention period of 5 days.

  RMAN will only compare the data file with backup within the period of 5 days games - even if the data file it as backup has not changed in this 5 days.

  So be very careful. Given your political retention is so low, I would not use optimization.

  I was wondering if at Thursday I'm still able to restore the database if tablespace 'users' are deleted? Very good luck, you will lose data.

  Test your period of detention inside and outside before look you at optimization.

  Best regards

  mseberg

• How to see the latest version of Vmware Tools in CentOS guestOS?

  After the installation of the new v5.0.0. VmWare Player on Win7 hostOS I improved as VmWare Tools in CentOS guestOS.

  After that (and restart) I wanted to check/verify the current installed version of VmWare Tools and entered (as usual in previous versions):

  VMware-toolbox - version

  Unfortunately, the Terminal was told: "unknown command".

  Who is wrong?

  If not, how can I check the currently installed version of VmWare Tools?

  Matt

  Try the following command:

  vmware-toolbox-cmd --version
  

  It reported the following on my setup:

  9.2.0.15626 (build-799703)
  

• How to work the Scrollbar properties

  I am wanting to use control of ScrollBar instead of the horizontal scroll bar of waveform chart to force appropriate resizing, but I'm having a problem, understand what actually do the properties for it. Let's say my X axis has 140 points on it. When zoomed in on the data just say see the 50 points. Use of DocMax/Min, size Page and increment to ensure I can view all data moving left and right without slack at both ends of thescrollbar? I watched both the context-sensitive help for the properties and the scrollbar of cluster sample.

  I guess I am, how to position the cursor in the correct position based on the position of the data being viewed?

  I enclose my current attempt. The code I need help is in Config_Scrollbar.vi located in the false outer case.

  VI have been written in labview 2012

  He got.

  

• ST2420 exactly how to work the color controls?

  Try to adjust the brightness and to get rid of a yellow cast

  User Guide should tell you how to run the color controls:
  FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/Dell-st2420l_User%27s%20Guide_en-us.PDF

• How to work the first Adobe pro in 2 monitors?

  How to work in 2 monitors adobe Prime Minister pro

  Edition-Preferences/tab reading... as shown below:

  

  Neil

• How to recognize the physical cd in vmware

  Hi all, I tried to recognize the physical cd in vmware

  but it is undetectable.

  Do I know what can be please?

  Welcome to the community,

  What version of operating system and VMware Workstation host do you use? Is this a problem starting from a CD or CD playback, a guest already installed OS (what guest operating system do you use)?

  You did that the virtual CD drive is 'connected' (e.g. 'Connect to light' enabled)? In some cases, it may be necessary to activate the "legacy emulation" in the "Advanced...". "CD-ROM settings.

  André

• How do I download the latest installers of VMware Workstation?

  Hello.

  I usually download the latest versions of workstations VMware from its web site, but I can't ("unable to process your request. Please try again later. ("error). I don't want to use the internal update because it won't let me keep the installer. Where can we download large installers to archive locally without using internal updater to my VMware Workstation?

  Thank you in advance.

  A key can be registered only once, since the service IT gave you the key, I guess that have it in their VMware account. You can ask to give you permission to download on My VMware portal.

  André

• How to get the free license for VMware vSphere Hypervisor 5?

  Please show me the link where I can get the free license for VMware vSphere key 5?

  Connect the link with the register username and password below.

  https://www.VMware.com/tryvmware/index.php?p=free-esxi5&LP=default

  Click on licenses and download tab... you will see the license key.