How to recognize the physical cd in vmware

Similar Questions

• How to locate the location of a VMware Workstation v10.0.3 vmdk readers when stereotypes are present.

  Re: How to find the location of a VMware Workstation v10.0.3 vmdk readers when stereotypes are present.

  Hello

  Since nearly five months, I have worked on a particular project and am reviewing me with the details of the project. The virtual machine has three virtual disks. I remember the BONES of the virtual machine as well as the first disc of the vmdk virtual machine data files are in the Windows host file containing the virtual machine. Nothing unusual so far. I remember that I put the third disk of the virtual machine on my axis f: physical, but I want to make sure that before you start again work on the project.

  I see of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003880 we should be able to examine the vmx file and see the locations of virtual disk. What I've noticed, is that since I was a snapshot, I see this:

  scsi0:2.present = 'TRUE '.

  scsi0:2.filename = "MyProject-Disk3 - 000001.vmdk".

  So what I see in the vmx is the physical location of the disk snapshot delta and not the physical location of the vmdk.

  I also did a search for vmware vmdk files - x.log and I find:

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-DSCPTR: open [0]: "sample - Disk3.vmdk" (0xe)

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-LINK: opened 'F:\MyProject-Disk3\MyProject-Disk3.vmdk' (0xe): monolithicSparse, 83886080 sectors / 40 GB.

  2014 03-21 T 11: 35:46.964 - 04:00 | Worker #2 | I120: DISKLIB-LIB: open 'G:\VMware VMs\MyProject\MyProject-Disk3-000001.vmdk' (0xa, type monolithicSparse flags).

  So by brute force, I discovered that the parent for the VM Disk3 vmdk is the physical disk F. And even here, the only reason why I know that I have the right VM disk, because I included "Disk3" in the VM disk naming convention that I used.

  But what happens if I hadn't used a physical VM disk naming convention which did not include the name of the virtual disk of the virtual machine? How could 100% sure that the third disk of my VM was the vmdk parent that I had located on the physical disk F?

  There must be an easier way to do this for days just like that.

  I look forward to your reply.

  Kind regards...

  P.S. I noticed that if I close this virtual machine and click on the 3 hard drive (SCSI), it only shows the name of the file of the virtual delta "MyProject-Disk3 - 000001.vmdk" machine and not the parent vmdk.

  P.S. I noticed that if I close this VM and try using the disk utilities, the map shows that the path to the file delta 'MyProject-Disk3 - 000001.vmdk' and the parent vmdk.

  Virtual disk snapshot files have the file name of the virtual disk parent included in the file descriptor hard (text file), or in the hard data file according to the format of the virtual disk. In the case of a monolithic virtual disk format (i.e. a hard single file), you may need to use a hex editor to find the 'parentFileNameHint' somewhere between 0x200 and 0x400.

  André

• How to get the physical credit iTunes gift card?

  How to get the physical gift card iTunes on your iTunes store account balance?

  • You cannot buy an iTunes gift with in-store credit.

  See the link below to buy physical gift cards for iTunes.

  http://www.Apple.com/shop/gift-cards

• How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch?

  Hi Expert,

  How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch? Can you please clarify a formal way for this so have?

  A physical interface is numbered with the same name of the interface when printing on the physical port. For example "GigabitEthernet 0/1" corresponds to port 1 of the 0 module (or the base unit).

  A logical interface can be a subinterface on a routed port and will have a point ("". "") preceding the number sous-interface (ex. GigabitEthernet 0/1.1). It can also be a loop or a virtual interface (on a router this could also include interfaces like the tunnel and virtual tunnel or VTI types). A switch may also have a VLAN logical interfaces (e.g. interface vlan 1) which are used as layer 3 virtual interfaces of type.

• How to get the physical size of the screen?

  Hi all

  How to get the physical width and height of the screen (not resolution) in inches or in centimeters?

  Is there a method to do

  Thank you very much

  Display.getWidth () and Display.getHeight () you will get the number of pixels.

  Display.getHorizontalResolution (); and Display.getVerticalResolution () to get the pixels per meter.  Then by dividing appropriately you can find the actual size.

• How to mark the physical tables as "cacheable"

  Hi all
  
  Can someone tell me please how to mark the physical tables as "cacheable".
  
  Thnaks a lot

  You can make cacheable table by clicking twice on the table or go to the properties of the table. You can designate specific time duration for the year, month, days need to keep cacheable. Remember do this on the base tables will affect all alias tables.

  Thank you
  Amol

• How to add the physical switch/router to NSX

  Hello

  I check several labs and I have a big question unanswered!

  How can I add physical switch resources to NSX?

  on each of the scenarios, it assumes that you have a few physical interfaces on each host, and you can assign them to a VDS.

  It's good, but it was also available on old vCenter without NSX.

  For example, how can I add switch 24 ports 10 gigabit Ethernet on my Brocade switch to the VMware resource pool?

  Thank you

  Javad

  You are welcome, of course.

  The network virtualization is not on the ability to win, but it's rather on the use of the available capacity of more flexibly to maintain security between virtual machines without worrying about the port based firewall or port-approaches physical configurations and physics on the VLAN externally in your virtual infrastructure.

  Just as the server virtualization adds capability to your server infrastructure, it allows a more flexible use of the physical capacity that is available.  You must you the capacity available to the involved hypervisors.

  See you soon!

  Bill

• How to reduce the physical memory?

  I went from windows 8 back to windows 7 and found that only 2.92 GB of my ram to 8 GB can be used and the rest is physical memory. What should I do to reduce the physical memory? I have a dell XPS 15 (L521X)

  Sounds like you downgraded to Windows 7 32 bit.

  Check if you run that. 32-bit Windows 7 can only recognize this amount:

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• How to apply the physical design

  Dear all,

  I use Apex 5.0 and I downloaded materials from this URL: https://github.com/vincentmorneau/material-apex

  But I don't know how to put the css and js files.

  Best regards

  Hi OraDev,

  Now, if you are creating a new application with the theme of hardware design you will get ugly page without css and js:

  

  So, where are the css and js for the theme "design material". The answer is that they are in shared components-> static files request for application of the 'APEX material':

  

  Go to "Hardware APEX" application->-> static files of the Application, shared components, and then click 'download as Zip '.

  Go to your theme of created/switched demand to "101. Hardware design'->-> static files of the Application, the shared components and download the above downloaded zip file as follows (keep the flag file unzip it as 'Yes'):

  

  If you recharge now, your always the theme of hardware design application is not loaded. The reason is the css/js references in the theme. You can consult the following references If you go in the app-> shared-> themes components-> change theme "Physical design" then you find next references css/js:

  

  Now, what is this "& PATH.". The answer is the chain of Substitution defined in the application. You will find this substitution string defined in application of the 'APEX material"->-> Application definition attributes, components that are shared-> section of Substitutions as follows:

  

  Set the substitution string 'PATH' in your application (even as an application "APEX material"). Now reload the application page! You will find the theme of responsible hardware design.

  

  After the application of the "APEX material" in my workspace on apex.oracle.com: https://apex.oracle.com/pls/apex/f?p=45241:1

  Here is the 'Hardware Design Demo' application I built with above mentioned changes: https://apex.oracle.com/pls/apex/f?p=62930:1

  NOTE: Ideally, you should deploy the theme css/js/images on the webserver instead of load to the shared application components. Css/js/images loading depend on the web server you are using. After loading this web server, you need to change references in the theme of the workspace accordingly. So, you don't have to download the theme css/js/images whenever you create a new application with the theme of the hardware design or spend you your theme from application to the theme of the hardware design.

  I hope this helps!

  Kind regards

  Kiran

• How to see the latest version of Vmware Tools in CentOS guestOS?

  After the installation of the new v5.0.0. VmWare Player on Win7 hostOS I improved as VmWare Tools in CentOS guestOS.

  After that (and restart) I wanted to check/verify the current installed version of VmWare Tools and entered (as usual in previous versions):

  VMware-toolbox - version

  Unfortunately, the Terminal was told: "unknown command".

  Who is wrong?

  If not, how can I check the currently installed version of VmWare Tools?

  Matt

  Try the following command:

  vmware-toolbox-cmd --version
  

  It reported the following on my setup:

  9.2.0.15626 (build-799703)
  

• How to find the physical corruption

  
  Hello

  I backup sed post order for physical corruption in my database as follows.

  backup validate check logical database;
  
  

  After his command, I asked v$ database_block_corruption.

  12:04:47 SQL> select * from v$database_block_corruption;
       FILE#     BLOCK#     BLOCKS CORRUPTION_CHANGE# CORRUPTIO
  ---------- ---------- ---------- ------------------ ---------
           1      11477          2          228760588 LOGICAL
           1      11514          1          228760329 LOGICAL
  12:05:09 SQL>
  
  

  I'm looking for if it is a physical corruption of logical corruption?

  I also used the dbv command to check my system datafile (file # 1). And the output is as foolows

  D:\>dbv file=D:\ORACLE\ORADATA\OPERA\SYSTEM01.DBf
  DBVERIFY: Release 10.2.0.4.0 - Production on Mon Nov 18 11:56:23 2013
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  DBVERIFY - Verification starting : FILE = D:\ORACLE\ORADATA\OPERA\SYSTEM01.DBf
  DBV-00200: Block, DBA 4205781, already marked corrupt
  DBV-00200: Block, DBA 4205782, already marked corrupt
  DBV-00200: Block, DBA 4205818, already marked corrupt
  
  DBVERIFY - Verification complete
  Total Pages Examined         : 168960
  Total Pages Processed (Data) : 127180
  Total Pages Failing   (Data) : 0
  Total Pages Processed (Index): 25248
  Total Pages Failing   (Index): 0
  Total Pages Processed (Other): 2440
  Total Pages Processed (Seg)  : 0
  Total Pages Failing   (Seg)  : 0
  Total Pages Empty            : 14092
  Total Pages Marked Corrupt   : 3
  Total Pages Influx           : 0
  Highest block SCN            : 245793757 (0.245793757)
  
  

  As dbv always checks the physical corruption, but how can I make sure using RMAn that whatever physical corruption of only logical corruption? Thank you

  Alert log say something like the following

  Sat Sep 14 00:22:50 2013

  Errors in the d:\oracle\admin\opera\bdump\opera_p008_3916.trc file:

  ORA-01578: block ORACLE (corrupted file # 1, block # 11478) data

  ORA-01110: data file 1: ' D:\ORACLE\ORADATA\OPERA\SYSTEM01. DBF'

  ORA-10564: tablespace SYSTEM

  ORA-01110: data file 1: ' D:\ORACLE\ORADATA\OPERA\SYSTEM01. DBF'

  "ORA-10561: TRANSACTION SUCCESSFUL DATA block type ' BLOCK ', object # 5121 data."

  ORA-00607: an internal error occurred in making a change to a data block

  [ORA-00600: internal error code, arguments: [kddummy_blkchk], [1], [11478], [6101], [], [], []]

  SAQ

  Hello

  DBVerify reports two logical corruptions and physical intra-block by default. A good starting point would be to go through the MOS score below to understand.

  Logical and physical block corruptions. Everything you wanted to know on this subject. (Doc ID 840978.1)

  Basically, you will not be able to read data in the blocks in physical corruption corrupt some time may be able to read the data into logical corruption.

  In addition, DBVerify report the errors of DBV-200/201 to logical corruption.

  HTH

  Abhishek

• How to get the physical channel for USB card as ENET

  Hello

  For my application (VB .NET, using NIDAQmx 8.8), I need to access the 2 cards:

  a USB-6008 and an ENET9163.

  I would like to read the physical channels automatically with this feature NI-DAQmx

  Physicalchannel1ComboBox.items.AddRange (DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External))

  Unfortunately, he didn't get a single card at once.

  When the USB card is connected, he read the physical channels of the USB card

  When the USB adapter is not plugged in, it read the physical channels of the ENET card.

  I hope someone can help me with this problem!

  Thank you

  RB

  Hello RB.

  To read from multiple channels, you can enter in the drop-down list box "Physical channel", the comma separated channels, custom channels or if you read physics, the string "DevX/Benjamin: Z", where X is the number of device, and X and are the first and the last channel you want to analyze (for example to read to ai0 to ai4 from your device 1 enter "Dev1 / ai0:4"). Among the names of your channels, I guess they are global channels created in MAX? You can always read channels multiple and different advice by separating the comma.

  I hope this helps!

  Kind regards

• How to work the Optimus compared to VMware Workstation 8 with enable 3D

  Hi, I am doing some performance tests in VMware Workstation

  There are some improvements to run VMware using the Nvidia card or there is no improvement at all, and it's better to use default Intel card?

  I am running Windows 7 Ultimate host and as a guest Windows 7 Ultimate so I can compare with the windows experience.

  Host:

  

  Comments:

  

  Another thing I found interesting is why the performance of the hard disk are the same, but the memory is quite low in comparation with the speed of the host

  Is it normal? Can I improve the performance of the memory procesor or 3D in some way?

  As the comparation that I am very interested in the functioning of memory per second.

  There is always some trouble when virtual hardware running and it is not that you can do to improve except to avoid paging, the latest version of VMware Workstation and have the updated drivers.

  The Windows experience index is also a pretty poor excuse for reference so according to what are your objectives is better there tools like pass etc.

  What type of workload are underway in the virtual machine?

  Linjo

• How to get the free license for VMware vSphere Hypervisor 5?

  Please show me the link where I can get the free license for VMware vSphere key 5?

  Connect the link with the register username and password below.

  https://www.VMware.com/tryvmware/index.php?p=free-esxi5&LP=default

  Click on licenses and download tab... you will see the license key.

• How to recognize the manual entries

  Hello
  
  In the tables GL, GL and GL headers lines, how can we identify whether a journal entry is an automated entry or manual entry.
  In other words, contributions can be sent in the General Ledger through Interface programs or other methods of importation. We describe it as some automated.
  And if the journal entries are made directly in the GL, to identify those automated.
  
  I need to know in a perspective of backend, i.e. which column in the table GL Specifies whether an entry is a manual or automated log entry.
  
  For Ex: In the table of GL_JE_Headers, the JE_Source and the JE_Category mentions hence is the source.
  Want, JE_Source Payables and Je_Category can be invoices purchase or payment.
  Looking at the above line, we can identify that it is an automated accounts payable entry.
  How to identify the manual entries.
  
  Your help is greatly appreciated.
  Thank you
  Bob

  Hi Bob,

  In the GL_JE_HEADERS table, column JE_SOURCE would have value as a 'MANUAL', this indicates that this journal is created manually in general accounting module and not imported from subsidiary ledgers. There is no indicative column for us in order to determine whether it is automatic or manual... not values such as MANUAL and REPETITIVE indicating entries that were created directly in general ledger...
  Also in table GL_JE_LINES for the GL_SL_LINK_ID and GL_SL_LINK_TABLE columns, the column values would be blank, because these columns normally contains reference to the basis of the auxiliary accounting transaction... .for a manual transaction it'll not be a reference to the auxiliary accounting, where they would remain under empty...

  Kind regards
  Ivruksha