How to write the field of custom attributes the end of the backup of the VM VM?

Similar Questions

• Open XML, how to write the path

  Hello

  I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:

  private static String _xmlFileName = "file:///store/home/user/documents/test.xml";
  DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              DocumentBuilder builder = factory.newDocumentBuilder();
              InputStream inputStream = getClass().getResourceAsStream( _xmlFileName );
              Document document = builder.parse( inputStream );
  

  I hope you can give me a hint, how I write the correct path?

  Thank you very much!

  Best regards, jtr87

  PS: Sorry for my bad English, but I did not use it very often.

  You need to do something like that to get your InputStream:

  /** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException {
      FileConnection fc = null;
      try {
          fc = (FileConnection) Connector.open(name, Connector.READ);
          if (fc.exists()) {
              return fc.openInputStream();
          }
      } finally {
          if (fc != null) {
              try {
                  fc.close();
              } catch (Exception ignored) {
              }
          }
      }
      return null;
  }
  

  Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.

• How to write the script in FDMEE below.

  How to write the script in FDMEE below.

  Script below is the FDM Script.How write in FDMEE.

  If (varValues (14) '113101' =) OR (varValues (14) '113201' =) OR (varValues (14) '113301' =) OR (varValues (14) = "252111") OR (varValues (14) '156101' =) then

  Result = "21_asd."

  Please help me on this issue.

  Kind regards

  Satheesh, S

  If you want to determine the id of the target account your opening assignment statement must be:

  Account = fdmRow.getString ("ACCOUNTX")

  As if - elif-instructions else keep lowercase stream operators. If you continue a command on multiple lines, then place parentheses is

  If (account == "113101") or (account == "113201") or (account == "113301") or (account == "113401") or (account == "113501") or (account == "113601") or (account == "215101") or (account == "215201") or (account == "215301") or (account == "215401") or (account == "215501") or (account == "215601") or (account == "252111") or (account == "156101"):

  fdmResult = "21_ADNIP".

  should be (also get rid of the unnecessary parentheses)

  If (account is "113101" account is "113201" or account is '113301' account is "113401" or account is "113501" or account is "113601" or account is "215101" or account is "215201" or account is "215301" or account is "215401" or account is "215501" or account is "215601" or account is "252111" or account is "156101"):

  fdmResult = "21_ADNIP".

• How to write the even-odd fill feature?

  How to write the even-odd fill feature?

  Maybe like this:

  app.executeMenuCommand ('* ');

  

  There is a command in the PathItem object named evenodd. I think that if you change the property of evenodd and get a member of a composite path path, you can achieve a desired result.

• How to write the query

  Hello

  How to write the sql query

  I have three type of table as

  1 table emp

  EMP_ID FIRST_NAME DEPT_ID

  ---------- -------------------- ----------

  1 kumar 10

  2 sam                          20

  3 30 damu

  2 table dept

  EMP_ID SALE_ID DEPT_ID

  ---------- ---------- ----------

  1 101 10

  2 102 20

  3 103 30

  3. table sale

  EMP_ID SALE_ID SALE_AMT

  ---------- ---------- ----------

  1 101 7

  2 102 8

  3 103 9

  I want the result as

  EMP_ID DEPT_ID SALE_AMT

  -------      ---------   -            --------

  1                10                  7

  Thank you

  Are you looking for this?

  SELECT T1. EMP_ID,

  T1. DEPT_ID,

  W3M SALE_AMT

  FROM EMP T1,

  SALE T3

  WHERE T1. EMP_ID = T3. EMP_ID;

  OUTPUT:

  EMP_ID DEPT_ID SALE_AMT

  ------- ---------- ----------

  1         10          7

  2         20          8

  3         30          9

  If this is not the case, after the actual output, you need. Because that gives you the amount of sales deptwise

• How to write the 'C' alpabelt within a circle of author?

  Hello

  How to write the symbol of copyright on first Pro CC (ie the alpabelt 'C' inside a circle) ?

  Thank you

  On a Mac, Option + G.

  MtD

• How to write the query option in expdp

  Hi Please someone help me how to write the query option in expdp... .in expdp using the query option...
  
  where AM columnname between 5 May 12 02:57:00.000' and ' 02:59:59.999 6 May 12: ';
  
  
  Please do what is necessary...

  Pavan Kumar says:
  QUERY = (columnname scott.test: "where between 5 May 12 02:57:00.000 h ' and ' 6 May 12 AM 02:59:59.999'")

  Who will fail in databases, because you assume nls_date_format. How it is difficult to put to_date() surround channels? Rather than play with quotation marks, using one parfile thusly.

  query=table_owner.table_1:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  query=table_owner.table_2:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  query=table_owner.table_3:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  

  You do not have to have all the clauses in a single line, as they are side by side parfile, which would be enough. For this reason parfile is better than the command line in order to avoid all the back-citing dance.

• How to write the select query for it

  Hello

  I had an html form and the area I drop down and he needs to select several values in the drop-down box. When I select multiple values then I have to write the query to SQL select statement.

  When I try to write the select statement and trying to run I get the error message.

  Select * from Table

  where emo_no = '1,2,3 '.

  That's how I write the query please suggest me how to write the query to select several values in the drop-down box.

  Thank you

  Use the keyword sql 'in '.  If you don't know how, I've heard good things about the book Teach Yourself SQL in 10 Minutes by Ben Forta.

• How to write the text file in Shockwave?

  Someone knows how to write the text file in Shockwave on the disc of the user?
  
  Thanks in advance.

  These Xtras can cause a lot of havoc when used with the intent to hurt.
  What you can do is to write with setpref and store a list of backups and the
  registers itself separately. Next, you need to build your own save/open
  dialog box for the user:
  * Choose a previously saved file to load or replace
  to create a user type the name of a new file to be saved.

  The only thing that remains is that the user can't decide where files
  are saved.

  Manno

  SiuLinda wrote:
  > Thanks a lot for your answer.
  > Yes, cookies is good, but I have to write a program to save the text file in
  > When the user wants, the user can open these files later if they like as, using
  > Filextra and Fileio, but I found that all these Xtra extensions seem to be not supported by
  > shockwave.
  >

  --
  ----------
  Manno Bult
  [email protected]

• How to write the Java script to reference the 1st page 2nd page text field?

  Hello

  I'm developing an interactive form of VISITOR info with webdynpro ABAP, his as well as 2 pages. Their hierarchy is,
  

  VISITOR_form
      |
      |
      |------Page_1
      |            |
      |            |
      |            |------Text_Field_A_1
      |            |
      |            |------Text_Field_A_2
      |
      |------Page_2
                   |
                   |
                   |------Text_Field_B_1
                   |
                   |------Text_Field_B_2
  

  
  Now, I chose the 'Text_Field_B_1' of page_2 and write the script Java, my requirement is; If Page_1's ' Text_Field_A_2' is set to 'Value_ABCD', THEN the 'Text_Field_B_1' of page_2 should be 'readOnly '. Pls let me know WHT is the Java script for this requirement?

  If (xfa.event.newText == "ABCD)."
  {

  VISITOR_form. Page_2.Text_FieldB_1.access = "readOnly";

  }

  Put the script on the Text_FieldA_2 change event

• How to write the function for bottom of logic...

  I have a picture in the picture I have a records like below
  code value
  1 20
  2 null
  3 30
  4 null
  5 40
  6 null
  
  
  The output need to have the values displayed in the fields first, followed by the NULL values as below
  
  code value
  1 20
  2 30
  3 40
  4 null
  5 null
  6 null
  
  I think the suspicion is that the values must be concatenated with the replacement of NULL values with (;).
  as
  20, 30, 40
  Get single values and insert into the table...
  
  for this I don't know how to write function for who can please help me on these...
  
  Published by: Claudia on June 22, 2011 22:45
  
  Published by: Claudia on June 22, 2011 22:51

  Create or replace function test_fun
  is
  cursor fun1 is the value select from table by CSA 2;-"this select query will return 20,30,40, null, null, null".
  v_out varchar2 (20);
  Start
  fun1 open cursor;
  loop
  extract the fun1 in v_out;
  dbms_output.put_line (v_out); - this is the command display output on the screen.
  output when fun1 not found %;
  end loop;
  close;
  end;

  Please try it and tell us if no query...

  Thank you
  IQ

• How to write the xml content of a file (Blob data Type) with other columns in file system

  Team,
  We are currently working on oracle 11 g. Suppose that we consider the SCOTT. EMP table for our creation of the table.
  All existing columns of SCOTT along. EMP table allows to assume that this table has an additional column name emp_xml, which is of TYpe of BLOB data and it holds xml data.
  the size of the data blob for each record in this col is greater than 32 KB (normally about 1 GB), now I want to write the contents of this column along
  with enmae, empno, hiredate into an external file. Assume that if we are only to the BLOB column that is emp_xml then the code below works

  Start

  for c in (select emp_xml from your_table)

  loop

  dbms_xslprocessor.clob2file (emp_xml.getclobval (), 'YOUR_LOCATION', 'YOUR_DYNAMIC_FILENAME')
  end loop;
  end;

  but I want empno, enmae, hiredate with blob emp_xml written in the external file. Any assistance in this case welcome.

  Concerning

  max_linesize

  Maximum number of characters for each line, including the newline character, for this file (minimum 1, maximum value 32767). If not specified, Oracle provides a default value of 1024.

  Defines how much you can read or write to a single call. I have to loop through the clob object and I write a pieces of 1024. So there is no limit to how much she can write. Just test it, IT will WORK!

• How to write the condition with the value of the parameter

  Hello
  I'm working on siebel BI publisher report. I am able to display the value of the parameter in the report.
  
  Now, I wanted to do something logical based on the value of the parameter.
  
  for example: If the user changes the value of the parameter then I have to call A submodel if user don't past not any value then it should not display A submodel
  
  can someone tell me how to write that above logic?
  
  If the parameter exists then MODEL of APPEAL one another do not call MODEL A
  
  Kind regards
  JAG

  
  Dial a submodel
  

• How to write the trigger for update of 2 tables

  Hi all
  I have 2 tables,
  
  1.lv_data,
  It contains the following fields,

  emp_name        tot_days
   guru                    18
              

  2.leave_data
  It contains the following fields,

   emp_name          From_date              to_date            no_of_days       remaining_days
   guru                    02/05/2012          03/05/2012           2                         

  In the second table, if the data is inserted.
  the no_of_days will be calculated automatically (from to_date - From_date) + 1,
  
  Here, I need to write the trigger to update the remaining_days column,
  
  First table for all tot_days emp_name is 18 days,
  Thus, in the second table every time that the record is inserted.
  the remaining_days must be calculated as follows,
  
  remaining_days: = tot_days - no_of_days and this (calculated) value should be updated in the tot_days column in the first table (lv_data).
  
  Example:

  emp_name        tot_days
  guru                    18
              

  2.leave_data
  

   emp_name          From_date              to_date            no_of_days        remaining_days
   guru                    02/05/2012          03/05/2012         2                          16
  [/code  
  
  Now the first table should be updated like,

  emp_name tot_days
  Guru 16
  
  
  So I need to update to 2 tables,
  can someone help me to update these 2 tables through TRIGGER?
  
  Thank you
  Kind regards
  gurujothi
  
  Edited by: Gurujothi may 1, 2012 19:54

  It is generally considered bad practice to store the value even in 2 places. You are having the kind of problems that you are experiencing now. It is much easier to store in the main table and get the value from there where you need to show in your forms.

• How to write the sql command in the batch file

  Jin
  I m using oracle 9i on windows. I want to know how I can write the sql on the command file command. I want to use a batch file to use the sql like shutdowm command & start command and any select command too.
  so please tell how can I do?
  
  
  thxs

  Tried looking for what he superdba.

  Can't connect to sqlplus using sys using a batch file

  HTH
  Aman...