How upgrade you your version of camera raw for support new models of cameras?

Similar Questions

• Can upgrade you your flash storage on an early 2015 mac book air?

  Can upgrade you your flash storage on an early 2015 mac book air?

  13 "

• How do you get version 11 help?

  Hi, I have version 11 elements. When I click on help, I am taken to a web page for version 12. When I click on 'previous versions' in this page web, I get a "access denied:" error message. How do you get version 11 help?

  Thank you

  Hi Peter,.

  Please click on the link given:-http://helpx.adobe.com/photoshop-elements/archive.html and this link have PES 11 got PDF help.

  Sarika

• How can you transfer the license Photoshop Elements on a new computer with Windows 8

  How can you transfer the license Photoshop Elements on a new computer with Windows 8?

  Hello

  Before installing it on the new system, please follow the steps below to disable Photoshop Elements from your old system.

  1. launch Photoshop Elements.

  2 - go to 'help' option and select 'disable '.

  Once disabled, you can download Photoshop Elements from the link below.

  Download Photoshop Elements products | 10, 11, 12, 13

  Let us know if this helps!

  Kind regards
  Vivet

• #0184579519 unresolved cases. How do you intend to fix my situation for a product I purchased?

  #0184579519 unresolved cases. How do you intend to fix my situation for a product I purchased?

  Contact Adobe direct http://helpx.adobe.com/contact.html

  These are users of forums frequented by Adobe customers.

  They can only these forums occasionally and only Adobe staff can help you with a case number.

• How do you download version 10?

  My hard drive crashed and lost everything. How do you download a latest version of Photoshop Elements and Premiere Elements, you have? (10)

  Go to the Adobe Download page and Installation Help

  Download and Installation Help

  Download and install 10 items and enter your serial number to authorize.

• How recover you your original genuiine microsoft software?

  How to recover your original genuine microsoft software?

  Hello thechef3374,

  I think that you may have about the replacement media.

  Please visit the following link:

  http://support.Microsoft.com/kb/326246

  Best regards

  Matthew_Ha

• How do you download version CS6 Adobe Creative cloud

  Need help as soon as POSSIBLE

  Here is the official response from Adobe, and it works!

  To download and install the CS6 applications with desktop CC application,

  Please launch CC desktop application and sign in with your Adobe ID and password.

  Then click the applications tab. Please search for 'FIND NEW applications', beside it, you will find an arrow.

  Select previous versions. You should be able to see CS6 applications.

• How can you change a password on Vista for a group of net work at home

  How can you access the area to change the password for a group of net work at home? I'm unable to find had worked well but formatted Vista computer to make it faster. Now unable to find the box to change the password. Another computer on a network running 7.

  Hello

  What password are you talking?

  If it's regarding network sharing again the sharing.

  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• How to make your own Board BNC connector for 37 pins PCI-6010?

  This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

  I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).
  
  
  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".
  
  
  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.
  
  
  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

  It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)
  
  
  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)
  
  
  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

  But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

  Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.
  
  
  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)
  
  
  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).
  
  
  • Ten for PFI/digital lines. Outers will connect to GND D.

  Up to a maximum of 29. You want maybe less, depending on your application.

• How do you get a prompt value required for the user who runs the report?

  Hello
  
  I have a quarter quick in my report.
  I want user must pass a value for him?
  How to go?
  
  Thanks in advance!
  RC

  Hi RC,.

  I don't think you can do a mandatory prompt. To do this, you can create a work around.

  1. in the command prompt, add possible value; "Please make a selection to first". You can define a SQL query for the value of Ant show you. View all possible values, and via a 'UNION' Add "Please make a selection to first". Default font. Now, your request will be displayed with nothing.

  2. create a "No. Results" - view in your application.

  In this way, it is not mandatory, but it forces a user to select a value.

  I hope this helps.

  Daan Bakboord
  http://obibb.WordPress.com

• How to make a backup recovery disk (usb) for my new XPS8700?

  Hello

  Please bear with me as I'm pretty much computer illiterate.

  I just bought a Dell XPS8700 with Win8.1 for my partner for Christmas.  It came with 2 TB HD cache & 32 GB of SSD.  Round 6 months. from now on I intend to buy a 120 GB SSD for upgrading its system & will use for the operating system.   I do not know how to do this (I have an idea... looked. vids online, etc.), but what I need to know is > how to make a backup for its new computer recovery disk (so that I can put it aside for when I get the new SSD).  I don't even know if that's actually what you still call it (recovert disc?) or if it is called "backup of factory drive?

  Basically, I want to put Win8.1 on a USB key so I can use this more later to reinstall it on an SSD.

  I bought a Lexar 32 GB USB (3.0) to use for this.

  Can someone "please" give me a step by step on how to go about doing this?

  Thank you!

  • Video tutorials
    • Creation of recovery with Dell backup and restore 1.5 media
    • Backing up data using Dell Backup and Recovery 1.5
    • Windows restore after a Crash with Dell backup and restore 1.5

• How can I migrate data UAC 8 widows for a new user account.

  Hi thanks for your help.

  I created a new user account in my pc Windows 8 and I want to migrate my data, files and images for the new user account.  Anyone know how to do this in Windows 8?

  Thank you

  Hi Wendol,

  Thank you for choosing Windows 8 and we are happy to help you.

  I understand from the description of the issue you want to transfer data from one account to another account in Windows 8.

  I suggest you to move your public folder data, so that all users on the computer will be able to access. Go through the article to learn more about public folders and how to enable this feature.

  Public folders: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/public-folders-FAQ

  It will be useful. For other questions related Windows feel free to get back to us. We will be happy to help you.

• How can I load a Photoshop already bought for my new laptop that I just bought

  I just bought a new laptop - how can I load a Photoshop program already bought for my new laptop?

  Hi melissah88436617,

  You can download the previous version of this link: other downloads

  If you are not able to find the exact link, you can share the Photoshop version you want to install.

  Kind regards

  Claes

• How can question - I move Acrobat 9 Standard for the new old computer

  Question - how to transfer Acrobat 9 Standard from old computer to new

  Hi Jonno2a,

  A single license for Adobe software allows you to install the software on two computers. However, you can use the software on a single computer at any given time.

  If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer. Uninstalling the software does not disable it.

  You must disable the software first by going to the "Help" menu in Acrobat and choose "disable".

  You can then go ahead and install Acrobat 9 standard on your other computer and activate with serial number.

  REF. http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html