How using the menu 'bevel and Emboss?

Similar Questions

• Convert to bevel and Emboss effect in separate layers

  I followed a tutorial to make the paint drops to http://www.planetphotoshop.com/dripping-color.html.

  I don't know what version of Photoshop was used in the video. Maybe CS3 or 4? It seems that the video was created in 2008? Towards the end of the tutorial (on the last 1/4), it converts the effect bevel and Emboss in layers separated in order to remove the effect of the top and the sides of the picture. I can't seem to find the option 'Create layers', when I Ctrl + click on the layer. Is only the layers 'create' listed somewhere else or there at - it another way to remove the bevel and Emboss effects from the top and sides?

  Layer > layer Style > create layers

  What version are you working?

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• My bevel and Emboss does not recognize the right choice

  So I found a model online. I imported into PS, I then used the perspective deformation tool to stretch it in place. Now I would like to in bevel and Emboss the holes, however, after the selection, he in bevel and grit the model itself. And it is pixelated. I don't know what is happening.

  

  selected holes...

  

  See how it's cut the whole Board? I don't know what is happening. I want that the holes to be cut.

  Thanks in advance,

  Tom

  After you make the selection, choose Cmd + J to put this item on its own layer. Then you apply bevel & Emboss. That should give you the result you are after.

• How to display the menu bar and address at the same level?

  Firefox 4 seems good, but a major problem is that the menu bar, the bar tabs and the Navigation has a bar a clean upper-left line in the window, with mainly two effects:

  1. Much space wasted on the top right
  2. The real web window being compressed very vertically, so if you have a laptop or widescreen for another reason, then it isn't really a lot of space on the left for navigation.

  The Compact Classic add-on does not solve this problem, but with the adverse bars becoming quite small and rather hard-to-reach buttons. A better solution would be to show the menu bar and the Navigation bar at the same level, but how?

  Default on Win7, Firefox 4.0 not same poster not the Menu bar - the orange Firefox button is displayed. Right-click on the Menu bar and click on the menu bar in this context menu to deselect. When you have the orange Firefox button projection and the menu bar is hidden, you can access the Menu bar by pressing the ALT key .

  Or, you can open the toolbar Customize mode and move items from Navigation bar in the Menu bar, and then hide the Navigation bar.
  
  https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
  
  http://KB.mozillazine.org/Toolbar_customization

  In addition, there are a number of compact menu extensions that deal with compaction of the Menu bar down to a button that replaces the menu bar and provides a drop-down list of these menu items. Or extensions that allow you to Customize the Firefox button menu and add menu items that aren't there, but who are in the menu bar. Using most of these types of extensions involves using customize to move the items according to your tastes.

• I lost the ability to use the hue, Saturation and Luminance for a reason any? I now have the Calibration of the camera, which I never use. How can I get HSL back to develop the module?

  I've lost the ability to use the hue, Saturation and Luminance option in develop module. I now have the Calibration of the camera, which I never use. How to bring back HSL? Help!

  Use the menu command

  Window-> panels-> STL/color/black & white

• How to change the menu colors when you use the menu widget?

  So I inserted a menu using the menu widget, but how can I change the background colors? at this time is grey

  To change the background color of the item of a menu, simply select the Menu item (by clicking on the Menu twice) and change the color using the options of filling for the different States. If you change selection set in the options list, the color would be changed for all menu items.

  Thank you

  Vinayak

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• How to get the menu bar and dock to stay visible in Mail?

  To expand the text in my mail, I hit full screen to see if the text to expand.  However, I lost the menu bar and the dock, which was still visible before.  I have a Mac Pro with the retina (13 '').  If I move the cursor to the top or the bottom of the screen, they show.  I read that if I press ESC, it will leave full screen.  Well, it does, but the screen is reduced to half of its size and the menu comes on top.  But how I show all the time in the mail.  Weather in Safari.  Thank you!  Debbie

  Exit full screen. Hold the option key and press the green button to expand the format full screen or

  You can drag the window of mail to any size you want from the corner or edge.

• How to open .tif files using the Windows fax and picture viewer

  I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.

  Windows XP SP3 with all updates and IE8.
  Thanks in advance,
  Eric
   
  Original title: how IE8 to open a .tif file by using the Windows fax and picture viewer?

  Hello

  I suggest that allows you to remove any CLSIDS listed under location:

  HKEY_CLASSES_ROOT Type\image/tiff
  
   

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• How to put on the menu bar and the window decoration of form 11g Rel2?

  According to the documentation of shapes, you can turn off the coast of the menu bar and window decoration.
  
  How this can be done?
  
  Best looks, Luis... :) =

  Documentation (forms Deployment Guide), see Section 3.4.3. Refer to 'guiMode '.

  http://docs.Oracle.com/CD/E38115_01/doc.111210/e24477/basics.htm#BABGEGBC

• How to use the OS Android and Windows on the same shelf?

  Original title: is it possible I ca use the OS android and mircosoft OS?
  Is it possible that I can used both ANDROID OS and MICROSOFT OS at the same time in my Tablet?

  You will not be able to install the Windows operating system on an Android device.

• How do I use the letters A and O in Dreamweaver?

  I wonder if there is any way I can use the letters A and o Dreamweaver transforms the letters some random mess. They are used in my mother tongue and so far I have not been able to use. I can't also set with change the language of Dreamweaver on my own since it was translated to it. Are they fixed if I download my files on the net? If this is not the case, what I have to do to fix this?

  Yes, you can use the accented characters in Dreamweaver, as long as you use a fairly recent version of Dreamweaver. Make sure that the document encoding is set to UTF - 8. If you can type accented directly from your keyboard characters, Dreamweaver inserts the characters directly.

  What you describe as back "some random mess" at the time where the browsers are not able to handle accented characters. Ä is the character entity HTML a. Older versions of Dreamweaver by default to Western European (iso-8859-1 encoding), which translates accented characters in the process of conversion to HTML character entities.