How we French curve?

Similar Questions

• How to generate curves under labVIEW

  Hi all
  Can someone please tel me how to generate the following curves under LabVIEW.
  Haversine curve 1.)
  2 Lorentz curve.)
  3 bell curve.)
  4.) exponential rise curve
  5. exponential decay curve)

  Note: Entries required for this curves are Amplitude, Phase, Offset
  Frequency and number of samples

  Have you read the second part of my post above?

• Smartphones BlackBerry how to reset curve to the orginal setting

  Bought a curve 8520.  Then I upgraded to a "BOLD".  Trying to make the curve of my wife.  I want to do is erase everything on the phone, it is like a new phone purchased so I can slot then just his card SIM in there.  How can I do this?

  Hello Spinaker,

  Welcome to the community,

  To perform a Reset of the Blackberry device please take a Reset a smart BlackBerry phone

  and how to do a security wipe:How to delete all data and applications from the smart phone BlackBerry with the optio security wipe...

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• How can I curve a paragraph or text box in illustrator without deforming the police?

  Hey guys,.

  I have a project where I try to add the paragraphs of the text to flow around a form of bean. The form is divided into 16 sections and each section has a single paragraph of text that must follow its own section of the curve. I don't want any deformation or distortion of the text and so far, the only solution I know is to manually create and lines of text link which is a lot of work compared to just power curve a set text box. Is this possible?

  Thanks in advance!

  Carly

  Which can be simplified.

  When you are finished with the paths, select all, and then type > threaded text > do

• How Warp text curve on a ring?

  Hello

  I'm trying to deform my text to mimic being superimposed on a lifeline. I tried to use the effect of the arc, but it still doesn't seem right. I want it curve above, as if it was really in the ring, if it makes no sense. Any suggestions?

  

  Create a circle using effect > 3D > revolution

  Map the text on it as work

  Hide geometry

• How to create curved text?

  I use Photoshop for quite awhile and consider myself very knowledgeable.  However, one thing that I never learned how do with text is something like this.

  How do you make the text resembles «RON NEWMAN CUP "?  Normally, if I had to, I would like to manually set each letter, but this is obviously not ideal.  I guess that there is a way to do this because it is a popular technique.  Any help would be appreciated.  Thank you.

  Create text, mark the string option, choose a channel that fits your needs.

• How to add curved borders?

  I was hoping that someone could help me code in some boundary curves. I would add a curved border to my sidebar and the grey content area.

  www.thecampuscocktail.com

  Thank you

  GRAMPS left his link.  Perhaps this will help you fill in the blanks:

  http://ALT-Web.com/demos/CSS-rounded-corners.shtml

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• How to get the peak value

  Can I know how to get the 2 peak values v1 and v2 and 2 duration times t1 t2.

  Since there is a small amplitude noise, difficult to use the Max simplely.

  May need to use a filter such as wavelets or TREE to Denoise it first. Can I know how to use, any Toolbox in labview. How do the curve smooth first.

  Thank you.

  I can't watch your vi now (I'm at work), but if your signals are long enough, you might consider a median filter.  You can set the number of points before and after use.  I found that it is useful for some smoothing problems (not all).

• Object > path > Outline Stroke creates edges serrated for curve

  When I saw a stroke, the nodes created along the curve are not smooth. Have these weird funky loops.

  Here are the images than just a stroke with the weight of 40 points. The segment showed a 3 anchor points.

  .

  Here's the funky loops I mentioned above.

  

  No idea how smooth the curves better and avoid this problem? Try to build a font in Illustrator before I transfer in Fontographer, but this is a problem for all my curves.

  Optimus,

  Have you tried to use the CAP round and round to join in the Contour palette?

• The french quotes

  Hello

  How to create curved quotes in Photoshop? (Opening and closing quotes)

  Thank you!

  Large. Thank you!

• How to create dynamic vats in a triangle...

  Dear friends,

  IAM creating the dynamic triangle... same as below:

  http://www.mathopenref.com/cosine.html

  I am struck upward in the creation of the shape of the curve near the corner (A) & B. Please tell me how do it curves dynamic... I have to finish my project soon... pls help me...

  Thank you and advance...

  use graphics methods.  in particular, the lineTo() method.

• Learning curve for a techie non-professionnelle catalyst. Two specific questions.

  Hi all

  Thanks for reading. I'm no techno which is looking at the development of Web sites as a secondary skill.ie. have know how atleast relay my ideas to web developers and ideally be able to refine and eventually be able to create my own Web sites.

  In this regard, I feel Business Catalyst is an excellent tool for people like me who mitiagtes knowledge of coding to a certain extent. I'm currently going by some content in the forums. Y at - it a book that provides detailed steps to end at the end of the implementation to complete a fully functional Web site and how is the curve in this regard?

  In addition,

  Business Catalyst offers all in one has, is possible to use 3rd party instead of default tools for a specific function, for example use wordpress for blog and a different email marketing service?

  Have a good.

  Thank you

  Smail

  Personally, I tend to prefer wordpress for a small-non-commercial site/blog. Its ecosystem of plugins is much more diverse than BCs and you get direct access to the code if you wish. Modules of blog and forum of British Colombia seem a little as reflections afterwards, designed by traders for the marketing, and there are some bumps on the way in which they implement what HTML and you have access to templates and that you don't have in a different context, so to a certain extent, wordpress gives you more control to fine grain on a site.

  The cross pipe of this is with open software source it doesn't necessarily control the quality or the guarantee of maintaining long term you might with BC. Catalyst for business is a lot more initially optimized for businesses (obviously) and its servers may experience a higher load and greater availability than you could get on a typical hosting with wordpress.

  WordPress is little-known to be hackable, mainly due to its ubiquity, well that if you work on it it can be fixed to a reasonable extent, I think - I'm not aware of the security issues concerning Business Catalyst, apart from the recent issues with the captcha and spam, which could have been resolved with Akismet and Recaptcha (which you can also get on Wordpress of course) , but personally I do not have all of my accounts linked to a unique Adobe user and password name.

  But then again, I trust that Adobe has their * together and he isn't some emerging suppurating sitting at the heart of all this, because the price you pay for playing in the sandbox sand in British Colombia, it's just that - it is their sandbox. They are not releasing the code. If you can't change it with an existing module parameter or can't hack around with JavaScript and then complain until they fix it is your only option.

  In short, I think it depends on your needs. He is quite the wrong answer, and both have their problems. I was also frustrated with some of the bugs rendering and limitations in British Colombia I have with the way Wordpress (IMHO) exaggerates abstraction everything in simultaneously stick to his style of model horrible mix code and content. If you have inventory and that you have to push stock and doesn't really care about mucking around with code side server or something really complex that BC will probably work for you, and of course there are still sites like bcgurus and these forums for help with borderline cases.

• make curved chains.

  Hello everyone.

  Ive tried to make a straight chain and curve.

  Ive tried the curvature, but it distorts the links and become out of shape.

  any ideas how I would curve like the one in the diagram.

  Thank you

  Phil.

  I did the deformation of the puppet

  

  

  does not appear to distort too and seem very good

  -janelle

• Need help with the curve of a group of objects

  Salvation Group;

  This is my first post in this group. I'm quite new to Adobe Illustrator CS5, and I had to start using it to provide the type of file to a printer for Sublimation in the USA. They use CS5, and all colors are limited to the Pantone Solid Coated for their printing system. I'm swimsuit fabric printing.

  However, my question is probably very basic. It is also frustrating, because I have already successfully did this that I ask, just do not remember how I did it.

  

  In my image, the upper rectangle has curved shape finished (bottom). I've done this before, with in fact several objects together. They all have the curve with the rectangle.

  I tried to do it again, using all kinds of transformation tools (shear), the tools of the effect and everything I could find, but nothing has worked. I thought that maybe to shear would work if I could fix in the middle of the rectangle and shear on both sides of the rectangle to the top, but it does not work. I think I'll start to take notes when I find something that works!

  How this simple curves of single object or group of objects? It can be done, I know!

  Thank you, Tom.

  You can also use the Suspender Warp or distort the Emvelope > make with Warp Arc

  How to apply it

  as individual objects and the other as a group

  As objectrs

  

  As a group

  

• Using Illustrator for accurate drawings

  Hi guys,.

  If anyone has any advice for the questions that I have below it would be greatly appreciated. I know that all of the methods of work are different, but I'm having a hard time getting these answered despite the amount of redundant to information on Adobe products

  (1) when I see professional logos or type forms (I mean companies) and especially the curves are perfect. Is it possible to do that? It's pixel perfect. This reminds me of design with the old methods of the circle and french curves.

  (2) is it possible to get assistance with diagnol lines (so points on the same angle), curve precision from one point to another diagonly? I know that you can use the grid and then use move the handles by a amount of pixel, but making one side of the

  object is thick like another part?

  (3) I think typography is a great example and I have provided a below. Even after that sure that I know all the tricks to anchor manages, ect it's almost impossible to get a same curve width or serif.

  The image below shows a letter h and higher wheel base has been cut and illustrated by points.

  Thank you very much for the tips, pointers, or how work the other industry insiders!

  

  
  

  Illustrator is not a pixel based drawing software.  It is a vector path based on drawing software.  You should get to know the differences.  It is possible to make extremely accurately.  But, you must master the drawing tools and your ability to manipulate paths and anchor points.  I recommend that you give up your mouse for a tablet.  I would like to answer each of your questions:

  1. Yes.  Most of the text is policy based and then converted to outlines later in the production chain.  Curves are drawn more big and then reduced in size further down the production chain, like the old days.

  2. get used to order > operation M (travel) and duplication.  If you want a certain angle, use the tool rotation and entered the amount of degrees of your rotation in the rotation dialog box.  Like many other things in Illustrator, there are several ways of doing things.  You will learn more you use.

  3. the sample that you show has consistency very little because it is a script font.  But, if you draw a letter in his hand, you can use simple ovals and squares to help you maintain consistency.  For example, if your letter article is 1/16 "thick, create a rectangle 1/16" square and use it as a guide.  There are a lot of simple tools that you can use to help you.

  Do not forget this.  A good hand drawn text element can take hours, or even days to complete.  The software is not a solution where automated you a magic wand on the screen and the wha - la,'s done it.  Very rarely designers do not have to resort to hand-drawn text elements.  There are fonts than ever before.  In some cases, you can use a font for a quick start and then change some letters for everything that calls for your project.