Only 200 NAS with 2 drives - maps

Similar Questions

• Problem with the drive mapping with error code 1312 network

  Hello guys.

  When I use the function of network with the config below card reader in the enterprise, it takes so long when connecting and finallly gave the error message

  (who needs to connect is a group of servers and we use the domain name to access)

  

  

  error message:

  However, when you use the following configuration, it could connect successfully.

  

  

  Also when using net use command line, he gave the missage with 1312 error code error.

  Do you know what exactly is causing this problem and give a solution?

  Given that we have to use the map network drive feature in our program.

  Thank you very much!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• problem with the drive map satellite p200-1ba (pspb6e) on windows 7

  Hello! I have recently upgraded to windows 7 and my card reader does not work. I have a laptop p200-1ba (pspb6e) satellite. I installed intel chipset utility, robson package and everything seems fine in Device Manager, but nothing happens when I insert my card in the card reader. Anyone any ideas? Thank you.

  Hello

  > No support of flashcards for windows 7-32 in the downloads section

  Have you tried Vista? Most Vista drivers are compatible with 7

• Windows 7 Home Premium cannot map NAS / network storage drives

  Hi, I'm currently on a PC Windows 7 Home Premium and I have two 2 NAS drives.

  I am running a Buffalo Linkstation (old version) and a new Iomega Home Media Network Hard drive.

  Initially I thought it was just my Linkstation from Buffalo who is older and has had no updates of the firmware that cannot be mapped as a network drive. But I just got my new Iomega hard drive today and installed the latest firmware and software. The Iomega software detects the drive and all of its shared folders but the problem is that I can not map any shared folders as a network drive, making it useless on my Windows 7 computer.

  I can access both NAS drives on my windows xp pro machine very well.

  I got off the phone with Iomega technical support and they said that it is a well known problem with Windows 7 Home Premium and readers of Samba. Is there someone out there who can give me a solution? I already tried the fix LMCOMPATIBILITYLEVEL on other forums I found by changing the values 1 or 2 - but still no luck.

  It gives me an error of network even when I try to connect to the ip address of the NAS, however - it appears on my network but I can not access or map!

  I really want to get my readers network running on windows 7 Home Edition premium without having to upgrade to other users are still having problems, I read. It's a little pathetic I can't even map a network drive on my pc.

  I had exactly the same problem with my drive hard Lacie network. If your drive contained donkey type of media, music, or video, Win 7 use the reader as a "Windows Media Connect" device, opening the disk in Media Player, showing only media files...

  This prevents access to all ot0her of the player records.

  However, I found that it is possible to add the drive as a network drive, if you know the name of the root folder.

  In my case, it's "openshare", so when you enter the path to network drive, I use \\192.168.xxx.xxx\openshare, and it allows me to access the drive...

  Why Microsoft chose to make this type of access to the files of so difficult to get simple network, just blows my mind, knowing that WinXP has it done easily...

  I hope you were able to understand my English, and that this could be useful.

  Kind regards

• Delay in an executable LabView 10 starting with the present mapped drives in Windows 7.

  I am running windows 7 on a network peer-to-peer without internet access with an executable version of LabView 10.  Executables mapped access folders on the network and works very well once it is up and running.  The problem is the time required to run the executable when the mapped drives are present.  It takes about 65 seconds to start and now, windows displays the message "not responding".  But it always starts.  If the mapped drives are disconnected, the executable file starts in 5 seconds.  The same executable running under windows with the same mapped drives THAT XP doesn't have this problem.  Any ideas?

  Hello Rgenaway,

  Probably, it is simply a matter of Windows than a problem of LabVIEW. The difference between the time it takes to start when the drives are present and absent could be due to both the application and the readers need to connect and start communicating.

• How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  Hello

  Make sure that D: is not the partition recovery including the manufacturer put there to make the recovery disks from and eventually to return your computer to how you bought

  You cannot combine C: and D: and their data using the Vista Disk Manager

  with Vista, you will need to save the data on D: - D: delete - and then extend C: into the now unallocated space where D: was to do a 1 partition 2

  read the tutorial below

  How to remove and extend a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Peripheral how can USB Sandisk 8 GB showing only 200 MB, I get my USB sandisk to read its full capacity?

  How can I get my USB sandisk to read its full capacity.

  Original title: usb sandisk 8 GB bed only 200 MB

  It seems that USB is being reported by the operating system as having a GUID Partition Table (GPT). You can check this by looking at the properties of Disk Volumes tab and see what style of score reported is classified. If it lists the GUID, then you will have to do manual things to return the USB in a single volume, MBR, because the operating system does not let you delete volumes on removable media directly.

  1. DOS command box open in administrator mode. In Windows 8, find CMD and then right-click on it and select 'run as administrator '.
  2. At the command prompt, type "diskpart".
  3. Type list disk to see your records.
  4. You can also open the computer management > storage > disk management and check the number of the USB drive disk
  5. Then type "select disk 5 ' replace the 5 with your USB drive number
  6. Type 'clean' and this will remove all the volumes on the active drive of the development of zeroing of sectors. Thus the files that you have on their will also be lost.
  7. Return to disk management, and operating system should now report the USB with the almost total size, but as "unallocated".
  8. Click on the "unallocated" for the USB drive and select new Simple Volume.
  9. Follow the wizard to partition the drive. Make sure you select FAT32 file system.
  10. With a new sound volume, right-click and format the USB. Since most of my USB sticks are now 4 GB or more I use NTFS as the format.

  Then remove the USB and the plug into another machine of Windows 7/8 and it should now report the right size disk and volume.

• Using a NAS with Adobe Premiere?

  Hey!

  So, long story short. Me and a few guys edit video for ourselves or others. There are now a few of us who work at the same time sometimes, 2-4. Manage all this media we sometimes get on with different drives everywhere and different versions of projects Gets a little messy. If we wanted to have a central location where we can draw media from and change.

  We think goes in the direction of NAS and I pulled a few parts from NewEgg which seem to to adapt us.

  Here's my question:

  How exactly does Adobe Premiere and a fair NAS LAN?

  And as I understand it, if media files are on the NAS and the project files are on our work computers, if we open our computers that will playback, record, export and not the NAS that's all small little CPU.

  Fix?

  TL DR: when you work with a SIN, is SIN with the media on this subject, or the computer with the project file, that you work the who did the treatment. What happens if the project file on the NAS and open from a work computer?

  Additional

  If you're asking about the NAS specs, I looked on NewEgg:
  * Micro ATX intel motherboard with 6 SATA III

  * 3.0 GHz iCore 3

  * 60 GB SSD for OS (FreeNas)

  * 4X2TB Western Digital Green, storage media and readers to share on the network

  * 8 GB OF DDR3 MEMORY

  There are a lot of discussions here on the nas, if you want to see the problems others have ran using nas or network shares...

  a nas is a computer, but he doesn't have the processing of the adobe project. It transfers only the requested data (video files) on computers on a network. This does not add a middle man, as the two computers talk to negotiate the transfer of data, vs. a direct connection and control using an internal hard drive or usb.

• A80 - 154 does not start - only black screen with strange resolution

  Hello!

  I have a big problem with the laptop. When I start it the power led and battery LED or power plug LED is blue (depending on what energy source is used, the problem appears both!). It's normal. But you don't see anything on the LCD screen. And nothing happens. Are lit, display is not black, no sound of the HARD drive or the fan. When I connected my external 17 '' TFT, he says that there is a signal, but the screen remained black.

  The signal has a resolution of 720 x 400 70 Hz, which is a very exotic resolution and a strange frequency! Anyone has any idea what it could be? I connected no matter what USB or other device. Only the laptop with or without the battery.

  Hello

  Well, it's not easy to say what may be the problem. I think it s a hardware malfunction, but I don t know which part might have a failure. Maybe it's something wrong with a CPU or memory modules s.
  In this case, I recommend to contact the service partner. He can do some tests.

  Good bye

• Handcent shows only 200 messages in a string

  I have a Droid X and use Handcent for texting. I have a string I used for a friend, but only 200 messages show the chain, instead of all messages. When I receive a text, one of the earlier texts files of the chain. Is there a setting I'm missing? When I used to scroll to the beginning of the string, there was a bar there that says 'Show '.

  The previous posts"he's gone.

  Any advise?

  There are a couple of settings that you can change that might help.

  First, open the text messaging application (application default) and press Menu > e-mail settings > message limit. Change this to 1000. It was the highest I could put it on my phone.

  Then open Handcent and press Menu > settings > Application settings > default messaging application. Now I don't know which setting will actually disable the stock email app. I guess you'd want all (SMS & MMS). I don't know about this one. The default value is Disable and the stock messaging app still get texts on my X, so I guess that everything would be one you would like.

  I couldn't really find anything on this line parameter. Then perhaps, just play with it to see if it does nothing for you. I think that defining the limit Message in the stock 1000 text messaging application you will get what you need at the moment. What happens when you reach 1000 in a thread? Probably the same as what is happening now, unless there Handcent actually disables the application inventory with the setting above.

  The reason why I have you change the Message in the application limit stock is because even if you use Handcent, the stock application continues to receive messages, so that the setting is one which is no doubt keep the message limited to 200 per thread. I hope this helps.

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.