How we use the variable checkbox?
I use Cap 8. Finally, I want to set a variable to store the user's decision to play any narration automatically, or do not play automatically narration.
A check box appears as a perfect way to let the user make this decision, so I used the box widget to display only a single checkbox. Successfully, I set the text property of checkbox and entered a unique variable name (myNarrationDefault) to store the State of the checkbox. Now how to access the variable?
I added a text field, so I could see the value of this variable. However, when I try to insert a variable, I don't see the new user variable, in the list. Then I tried to add an action to a button just to see if the variable appears in the tool; There can be no.
I'm doing something wrong?
Thank you
Pete
In fact, you will need to create so that the variable you made in the interaction interface, CP does not do it for you, project/Variables in the top Menu.
When the box is checked, the value is then assigned to the variable.
Tags: Adobe Captivate
Similar Questions
-
How to use the variable in the path of the source of an image in flex
Hello
I just want to know that how to use the variable in the path of the source of an image in flexHello
I just want to know that how to use the variable in the path of the source of an image in flex -
How to use the variable in the coil
How can I draw a sequence number of the database and use it in a sqlplus spool file name...
This forum works as: sqlplus user/pass@sid@c:\file.sql
sample file:
BEGIN
declare
V_E_NUMBER varchar2 (7);
Start
Select "E" | LPAD (RWP. E_NUMBER_seq. NEXTVAL, 6, '0') IN THE DOUBLE V_E_NUMBER;
end;
end;
Select "E" | LPAD (RWP. E_NUMBER_seq. CURRVAL, 6, '0') IN THE DOUBLE V_E_NUMBER;
trigger the echo
SET THE POSITION
SET LINESIZE 430
set verify off
SET PAGESIZE 0
SET TRIMSPOOL ON
SET OFF calendar
SET termout ON
SET feedback OFF
coil d:\securedASP\CORE. BU34500.AR.'|: V_E_NUMBER |'. RECEIVD
Select * from table;
spool offHello
Use a substitution for that variable:
COLUMN v_e_number NEW_VALUE v_e SELECT 'E' || lpad ( RWP.E_NUMBER_seq.NEXTVAL , 6 , '0' ) AS V_E_NUMBER FROM DUAL; SPOOL d:\securedASP\CORE.BU34500.AR.&v_e..RECEIVD
Note that this does not at all use PL/SQL.
The variable can be used without quoting or concatenation.
Which can lead to situations where it is ambiguous as to which is part of the name of the variable (the variable is named ve in this example), and what is literal text that happens to come right after him. To resolve these issues, use a point to mark the end of the variable name.
In your case, you want a literal period just after the variable name, use two: one marks the end of the name, and the other is taken literally.Get the SQL * most orders
COLUMN,
The VALUE of CONCAT, and
SET
For more details. -
How to use the variable instead of the table name in the select statement of procedure
I have a procedure with a select statement with dynamic from clause. How can I use instead of the name of the table variable.
create or replace procedure scc_chemical_analysis
is
v_table_name varchar2 (100);
Start
declare
cursor c1 is select * from v_table_name; -This is the variable name. How can I use it in the select statement.
.
.
.
.
end;Hello
something like that.
1 declare 2 vSQLString VARCHAR2(32000); 3 pTableName varchar2(1000):='EMP'; 4 BEGIN 5 vSQLSTRING := 6 'SELECT ''x'' FROM ' || DBMS_ASSERT.sql_object_name(pTableName) || ' WHERE rownum<=1 '; 7 EXECUTE IMMEDIATE vSQLSTRING; 8* END; SQL> / PL/SQL procedure successfully completed.
-
How to use the global variable in the table target?
Hello
I am trying to load several files into a single interface. the data is loaded successfully. 92. the files are there. for this I used variables and package.
My requrement is 92 files of data loaded into the target table. I want to know what data from file.
to this I added a column (filename) to the existing target table.
If I used joints (not same condition), its totally wrong. all file names are coming.
Please see the following screenshots.
exit; target table.
in fact in the target table. first 10 lines are coming from file.i.e first _ACCOUNT_LIMIT_511.TXT. but all the files names are coming.
I'm confuse. After the first data file inserted then insert second data file. in that all file names are coming. Please help me.
I thought that the global variable is preferable to identify the data came from which file.
to do this, the global variable is used in the target table. I don't always have my exit.
Please help me.
Thanks in advance.
Hello
You can use the same way, how you use the project variable, just you have to do a thin is #GLOBAL.variable_name for example: #GLOBAL. SMART_AL_FILE_NAME_S
Note: Make sure you that while you use one variable overall in interface, indicator should be staged as you chose above the screen
hope this helps you
Kind regards
Phanikanth
-
Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.
CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
)
RETURNS INTEGER
AS
-Declaring variables
v_is_true INTEGER.
BEGIN
SELECT
CASE
WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)
THEN 1
ON THE OTHER
0
END
IN
v_is_true
Of
in_schema.in_tablename
;
RETURN v_is_true;
END;
/
When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist
How to use the values of the input variables on the table select statement names?
Hello
Here's a way you can use dynamic SQL statements for this task:
CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
in_first_date DATE DEFAULT SYSDATE - 1,.
in_last_date DATE by DEFAULT NULL
)
RETURNS INTEGER
AS
-IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield
-contains all the dates in the in_first_date of the range through included in_last_date
- and it returns 0 if there is no such lines.
-If in_last_date is omitted, the search only the data on in_first_date.
-If in_first_date is omitted, it defaults to yesterday.
-Time parts of the in_first_date and in_last_date are ignored.
-Declaring variables
sql_txt VARCHAR2 (1000);
v_is_true INTEGER.
BEGIN
sql_txt: = 'SELECT COUNT (*).
|| 'FROM ' | in_schema | '.' || in_tablename
|| 'WHERE ' | in_datefield | ' > =: d1'
|| «AND» | in_datefield | '< > >
|| 'AND ROWNUM = 1';
dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE"); -For debugging
Sql_txt EXECUTE IMMEDIATE
IN v_is_true
With the HELP of TRUNC (in_first_date) - d1
TRUNC (NVL (in_last_date
in_first_date
)
) + 1 -- d2
;
RETURN v_is_true;
END is_ydaydata_to_table;
/
DISPLAY ERRORS
If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above. In this way, you can easily see exactly what will be executed. Comment out the call to dbms_output under test is completed.
Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future. For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days. The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).
-
How to remove the variable created when using definedNamedWhereClauseParam()
Hello
My Jdev version 11.1.1.7.0.
I'm Executive where clause programatically where I need to bind two bind parameters under certain conditions. Example, I have two bind variables X, Y.
Here's the problem:
Assume that the first time I'm setting one variable X, so I define X bind variable and execute the query.
What second time I send only Y but not X. In this implementation of the scenario of VO throw an exception, given that the variable X is already created in the VO object and where clause does not have this setting.
So how to remove variables created in the original Version all in definedNamedWhereClauseParam(). I need to erase what ever the previously created variable every time I execute method.
I can make the similar functionlity using setWhereClauseParam (using literals). But I have a few technical restrictions for use.
Could you please help me how to remove the variable before vo using definedNamedWhereClauseParam.
Caused by: java.sql.SQLException: try to set a parameter name that does not intervene in the SQL: itemNumber
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:15969)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:911)
at weblogic.jdbc.wrapper.PreparedStatement_oracle_jdbc_driver_OraclePreparedStatementWrapper.setObjectAtName (unknown Source)
at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:4669)
at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3687)
at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:22742)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1298)
... more than 96
Thank you.
-Diette.
Published by: Vidya Diette on February 28, 2013 08:43Hello
You need access to the variable Manager. Order of reading in the JavaDocs:
http://docs.Oracle.com/CD/E28389_01/apirefs.1111/e10653/Oracle/JBO/ViewObject.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManagerOwnerBase.html#getVariableManager%28%29--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableValueManager.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManager.html#removeVariable%28java.lang.String%29
Frank
-
new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture. No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.
Hi GerdW
Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases. Now I want to insert user event by changing the control and influential cases during run time.
As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well. But then, I found there are a lot of screws that are using the string unbundle. One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.
I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.
I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?
Mant thanks!
Minyi
-
SQL how to use a variable and use the result as a reference for the name of the table
Hi all
I have new in the declaration of Oracle, sorry in advance if something is easy for you all. BTW, I have this scenario:
I have a table OL structured in this way:
Date - it contains dates, for example 11/01/2015
TableName - it contains strings, for example, OL1, OL2, OL3 and so on...
Then I have a different table, the name of these tables are of the same name in the table of the OL, so I have table table, OL1, OL2, OL3 table and so on. The structure of these tables is the same. And Yes.
table OL1
---------------------------------------------------------------
ID LAST NAME FIRST NAME PHONE
---------------------------------------------------------------
1 JOHN DOE 12345679
2 PAUL 111111122 TIBBS
table OL2
---------------------------------------------------------------
ID LAST NAME FIRST NAME PHONE
---------------------------------------------------------------
1 ANNA KRAIG (NULL)
NATHAN FRESHMANN 111111133 2
If the scenario is clear, I would like to retrieve the value (null), research in all the OL * tables by using the value of the OL table (tablename) max.
If I'm going to do these simple steps, I got the result:
Select max (TableName) OL
the result will be OL2
# I know not how to use the option set to avoid changing the table name in the sql statement all the time.
set mytable = 'OL2.
Select Name, family name
of & mytable
When the phone is null
Any idea?
Thank you very much in advance.
Hello
run immediately "select dt.log_id, obj.presentation_name, dl.begin_time
bulk collect into v_result_set
of ' | v_ol |' dt join internal ol_object obj on
DT.object_type_id = obj.object_type_id
inner join ol_chunk_log dl on
DT.log_id = DL.log_id
where dt.data_value is null';
dbms_output.put_line (v_ol);
end;
Correct the code such as:
run immediately "select dt.log_id, obj.presentation_name, dl.begin_time
of ' | v_ol |' dt join internal ol_object obj on
DT.object_type_id = obj.object_type_id
inner join ol_chunk_log dl on
DT.log_id = DL.log_id
where dt.data_value is null' bulk collect into v_result_set;
for i in v_result_set.first ... v_result_set. Last
loop
dbms_output.put_line ('LOG ID: ' | ) ( v_result_set.log_id (i)) ;
dbms_output.put_line (' NAME CLOSELY: ' |) v_result_set.presentation_name (i));
dbms_output.put_line (' START TIME: ' |) ( v_result_set.begin_time (i)) ;
end loop;
end;
Kind regards.
-
How to use the functions of SetValue executeScript activity.
Hello
Could someone let me know how to use the function activity setValue (serialize concate, count etc) in activity executeScript. What all liberaries I need to import to executeScript. I want to perform the same task in executeScript performed in the setValue activity.
Concerning
Sunil Gupta
Forgive me if I seem obtuse, but why would you use XPath functions (is that serialize, concat, and count) when there are perfectly good Java alternatives that will be much easier to use. Java is, after all, the language used in the executeScript. Serialize is just toString(), CONCATENATE is just + or. concat() (I assume that you are running on Java 6 web application server). The count function is just the length() or size() methods or to the tables, the length property. If you really need to reorganize in a variable of the XML data using a XSL stylesheet - you have access to all the functions in XPath 1.0 and XPath 1.0 power and you do not need to tinker with the headache of trying to debug Java in an environment (Workbench), which does not give you the tools that you would normally , as a contextual Editor.
-
You should have seen the date using the variable of presentation
Hi all
I am facing a problem in the display of the selected date of the guest in the report using the variable of presentation. I have a guest of data (calendar prompt), where the user selects the value. I take this value in the variable RBAP of presentation and report when I try to display this value using the same presentation variable, I get my date in the following format
"TIMESTAMP 2010-10-22 00:00:00 '.
I'm just using ' @{RBAP}' in the formula in the column.
I want to show my date in the format DD/MM/YYYY. How to do this?
I have used CAST (' @{RBAP} {' as DATE} and tried to change the data to dd/mm/yyyy format, but it does not work.)
Please suggest
Thank you
Ronnyin the default section to write the SQL...
Select the OPTION case SENSITIVE WHEN 1 = 0 THEN AnyExistedDateColumn CURRENT_DATE of OTHER END OF SubjectArea
-
How to call the variables of the scene inside movieClips
How to call the variables of the scene inside movieClips
One way would be to use "MovieClip (root)" to target variables in the main timeline... MovieClip (root) .someVariable = someValue;
-
Using the variable of physical table of type "select".
Hello!
I have to use the query as the physical table (in the Administration tool - http://file.qip.ru/file/120930377/8713693/1_online.html):
This code works well. I need to insert instead of session variables of the ' 1 'and ' 2', parameters which will be fixed to the dashboard.SELECT ID, CODE FROM TABLE (pkg.output('1','2'))
How to set the variable in this query? As variants @{test} do not work.Good timing, Im bother with that now.
use: "VALUEOF (NQ_SESSION.variable_name).
don't forget the other single quotes as the substituted value is not quoted.
-
With no headphone jack, how to use the iPhone in my car 7
Okay, so here's the challenge. I have a power source and a headphone and not Bluetooth. It works perfectly with iPhones before 7. But with 7, it isn't possible to use the same configuration I had for years. I own my car, and I have no interest in buying a new car just to support a new phone. And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.
So, how to use the new iPhone 7 while remaining responsible and using my car speakers? Dongles Bluetooth that I need to reload, it's probably not.
Thus, looking for ideas that might have people. I can't be the only one with this concern.
It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.
-
How to use the capture and the print button
I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?
Thank you
Andi Starbuck
That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?
Maybe you are looking for
-
I wa wondering if there is a way to create a timer entry so that in the GUI, I can enter a duration (in seconds) to have a certain open or close valve (i.e. to switch a switch). Is it possible to do without having to implement a timer in the program
-
I'm looking for a legend to print it to use as a resource. I started working on a project that is very far along, and I don't have the original author for help. If I had a few pages of reference I can print to help with in accordance with block dia
-
How to uninstall PSE 6, cannot find 'uninstall '?
PES 6 opens and then closes. I think it is causing problems with my Macbook Pro. I have vs 14 to install but want to get 6 off my laptop.It can not find an uninstall option, if people said online there is a. I searched all the elements and for uninst
-
You want to change the preference of information. where can I find 'Edit menu '?
you want to change the preference of information. where can I find 'Edit menu '?