Pavilion 500 PC Serise: HP Pavilion 5500 detects only not all 5G networks (Jan 2015) [Ralink RT5390R]

Similar Questions

• RAM Mac pro 1.1 detects only not all after kernel panic

  Hello

  my mac pro 1.1, 2 x 3.0 Ghz quad core, ram 24 GB os x 1.7.5 just had a kernel panic and stop, after being on for 12 plus hours for most sitting idle. When I restarted the mac pro, now he is grateful only 12 GB of ram on a lift and another elevator shows empty, the DIMMs are installed in mounting a 4gb4gb2gb 2 GB, riser board b = 4gb4gb2gb2gb =, are all matched pairs. all the ram has been installed and functional for the 7-8 months without any problem. This is the first time my mac has never stop from a kernel by itself, panic and he never failed to see half of the ram before, in fact it worked great for quite some time so far. I don't know what is happening and I hope someone can help me get this figured out and find a solution to this problem, thanks in advance.

  Bill

  You have a RAM failure.

  The Mac Pro features help Error correction Code RAM with hardware integrated with its Xeon processor. The Mac Pro 1.1 uses FBDIMM who get hot and do not have a long life expectancy. Work for 7-8 months does not work tomorrow.

  The error correction is used aggressively at the start, and all DIMM found to have errors during the Power-On Self Test brief execution have their slots declared 'empty '. This isn't an anomaly, these modules DIMM turns out to be BAD.

  If these modules DIMM is stickers from the seller, you can get replaced them under warranty of the seller.

  The kernel panic, you met just might be part of the same problem. You can find the report and review it and post it if you want.

  Mac OS X: how to connect to a kernel - Support Apple panic

  RAM problems show themselves as control panic machine, nucleus, often detected by more than one processor at a time.

• SFR detects only not all interfaces ASA

  Hello!

  We have, for me at least, a strange problem. We have two ASA5525-x to active / standby. Only a few interfaces (7 of 30) are captured by the SFR module (the same on both units). My experience is that only traffic entering and leaving on the known interfaces at SFR are handled properly. All other traffic is to expire. Of the SAA is in production (but of course without firepower).

  Any idea on how to solve this problem?

  ASA # sh version | I have system System image file is "disk0: / asa952-smp - k8.bin. ASA # sh run | I have the interface interface GigabitEthernet0/0 interface GigabitEthernet0/1 interface GigabitEthernet0/2 interface GigabitEthernet0/3 interface GigabitEthernet0/4 interface GigabitEthernet0/5 interface GigabitEthernet0/6 interface GigabitEthernet0/7 interface Management0/0 Interface Port - Channel 1 Interface Port - channel1.2 Interface Port - channel1.3 Interface Port - channel1.4 Interface Port - channel1.5 Interface Port - channel1.6 Interface Port - channel1.7 Interface Port - channel1.8 Interface Port - channel1.9 Interface Port - channel1.10 Interface Port - channel1.12 Interface Port - channel1.14 Interface Port - channel1.16 Interface Port - channel1.18 Interface Port - channel1.102 Interface Port - channel1.104 Interface Port - channel1.106 Interface Port - channel1.108 Interface Port - channel1.112 Interface Port - channel1.114 Interface Port - channel1.200 Interface Port - channel1.204 Interface Port - channel1.205 Interface Port - channel1.206 Interface Port - channel1.207 Interface Port - channel1.208 Interface Port - channel1.209 Interface Port - channel1.253 Interface Port - channel1.254 Interface Port - channel1.999

  > View version ----------------[ sfr1 ]----------------- Model: ASA5525 (72) Version 6.0.0.1 (Build 26) > Display interfaces -------------------[ 10.002 ]------------------- Physical interface: Port - channel1.2 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a -------------[ 10.003 ]-------------- Physical interface: Port - channel1.3 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a ------------------[ 10.004 ]------------------- Physical interface: Port - channel1.4 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a -----------------[ 10.005 ]----------------- Physical interface: Port - channel1.5 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a -----------------[ 10.001 ]----------------- Physical interface: Port-Channel 1 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a ---------------[ 10.006 ]---------------- Physical interface: Port - channel1.6 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a ---------------[ 10.209 ]--------------- Physical interface: Port - channel1.209 Type: ASA Security zone: no Status: enabled Load balancing mode: n/a ---------------------[ cplane ]---------------------

  Thank you for your time.

  Kind regards

  Erik Qvam

  Hello

  What is the version of the ASA? There is an existing bug that is fixed at 9.5 (2.6) and above.

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCut40770

  Rate if helps.

  Yogesh

• Import from Lightroom 6 detects only not all files

  I try to import a folder of images in Lightroom and it seems to turn off without problems or error messages, but when I check the number of pictures is not. There are 398 (JPG, NEF and a MOV) files in the network folder, I'm importing. But Lightroom shows 367. It seems to be jumping random jpg. I deselected "don't import suspected duplicates." I tried to drag and drop files missing in the library, but it brings just to the top of the import and shows dialog box then 0 new. What is happening and what I can do about it?

  Some of the missing files who refuses to recognize Lightroom exist and the file starting at the bottom:

  

  What I see in Lightroom:

  

  In lightroo preferences check "treat JPEG files next files to raw as separate photos»

  

• DVD Player detects only not MSI Motherboard 865PE-Neo3

  Hello

  I just finished one of my two friends to fix computers. One is the ASUS MB (computer) and the other Mo MSI (so there is no confusion). Note: both computers are built to order.

  The ASUS I completely fixed and works 100%.

  The MSI computer isn't "works properly at all. It started with the Windows XP login screen where I need the password of connection that couldn't my friend ' retireve it or knows about it, given that this computer was sitting on the shelf for a few years. Which is a Pentium 4, MSI 865PE Neo 3 motherboard.
  In any case I said to my friend that the only way to reset the password is to reinstall Windows XP Pro, which I was on will do. When I inserted the OEM disc and boot of it, the dvd player was not "on the startup list, so I went the BIOS/CMOS settings to check.

  In the BIOS/CMOS settings dvd player has no ' dectet at all, so I tried to manually substitute in changing a channel IDE for CD/DVD Rom, which he did not ' work.

  So the next step, I thought that if I tried the dvd drive of the MSI computer which is an LG model on the Asus computer which works very well. So I tried swaping cable SATA and DVD drive which it didn't work at all on the MSI computer. Everything works on the computer, ASUS, MSI computer not a reason any.

  The only thing I can think there is something wrong the MSI as the motherboard its self or is the BIOS? I am tired of searching for answers on the web and geek computer sites/forums and no response to my problem releated.

  Can some tell me the problem of this situation?

  Thank you

  You should use Google to look for the mb manual. It lists all the bios options and teach you how to make the necessary changes.

  I also read earlier that connect the sata cd/dvd cable to the sata3 has sometimes helped in these situations. I can't testify however. Certainly won't hurt to try if...

  I asked just recently one of my friends who is a Certified MS saying that the old BIOS on P4 will not detect any what sata DVD drives even if I update the BIOS. DVD players work only on the BONES of his car not on the BIOS.
  
  I have never heard that before and I'm sure that I did it myself... So, I don't think that is correct. If the accept P4 CPU and has SATA ports, it should work. I think it's just a matter of getting the correct bios settings.

  Edit: your manual not very helpful if. Based on my experience, the settings you need are likely under embedded devices.

• computer laptop 15-r006tu: windows 7 driver wifi detects only not :(:(

  Windows 7 does not detect not driver wireless. wifi activation button does not. 11 months no problem but today all sudden wifi does not. I already format my system and reinstell all the driver again but the problem is the same. I downloaded all the drivers from the HP site according to my laptop model. Can someone help me solve this problem?

  Setting the hardware id:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2211103C & REV_07
  PCI\VEN_10EC & DEV_8136 & SUBSYS_2211103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Help me please.

  Hello

  yesterday I talked about HP customer support for the Executive and it provide me with next link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147188_1&swEnvOid=4063#

  After installing the driver was the same, but at night when I was surfing on the internet LAN cable suddenly I saw the notification "Driver Installation" down right from my laptop. I was using LAN cable since my Wifi has created problems. After I opened device manager and I was shocked because all the pilot network, including bluetooth, wifi is there in the network adapter tab. I restart my laptop more then 10 times and I saw wifi works very well. I don't get why my laptop has so random.

• Windows detects only not MD3200

  Good day, everyone!

  We have DELL 810 Server with Windows 2008 R2 and Dell Power Vault MD3200.

  MD3200 to connect to the server with 2 SAS cables. I'm create disk with RAID, according to the instructions (result on the photo) and it works (I think). But Windows do not detect the disc. Maybe I'm doing something wrong? Help, please.

  

  Your photo shows your problem; You cannot use a PERC H800 to connect to a SAN MD network. You must replace this card with a SAS6E card.

• IPAD detects only not HP6500 wireless printer

  I used to be able to print with my IPAD on the HP 6500 wireless. Printer works and shows wireless is enabled.

  The router looks like a good router and the printer definitely supports Airprint.

  Because it worked before, we will try to rebuild the network connection between the iPad and the printer.

  1. turn off the power to the printer.

  2. completely turn off the iPad.

  3. turn off the power to the router for 1 minute.

  4 reconnect power to the router and wait for the lights to return to normal.

  5 turn the printer power on and wait for it to power on completely and connect to the network.

  6. power on the iPad.

  7. try printing again.

  While steps have been tried in a different order, this process works in most cases where Airprint was working and now it isn't.

• Vista detects no not my wifi? urgent please

  Experts,

  My laptop, dell vostro1500 running vista as being arrested to detect my wifi at home. No idea why. strange enough my phone connects to wifi and my laptop is looking other wifis except my own. so I checked both devices work fine regardless, it's just my lappi does not detect my wifi.
  What, I did and tried
  1. reset router
  2. change the SSID of the router.
  3-change ip address of the router (from 192.1681.1 to 10.0.0.1)
  4 removed all profiles laptop wireless
  5-merges all profiles in 1
  6-remove wifi adapter laptop, started and stop, put the card back in, restarted...
  7-re drivers installed
  nothing has worked...
  so, I came here to ask for help...
  Why the damn thing detects is not my home network... when its detection and connect to other wifi networks...
  He worked for months and stopped yesterday.
  Any idea?
  concerning

  Hello

  I suggest to create a network profile with reference to the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-or-modify-network-profiles

  Check if it helps.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• HP Pavilion p6 - 2220t: HP Support Assistant update 11/20/2015 causing several event ID 3 warnings

  HP Pavilion p6 - 2220 produced t NumberB3F79AV #ABA

  Windows 7 Home Premium 64-bit Service Pack 1

  Windows Firewall and Microsoft Security Essentials

  HP Support Assistant 8.1.40.3

  HP Solutions Framework 12.0.30.219 Support

  Since HP Support Assistant updated on 20/11/2015, which has also updated HP Support Solutions Framework on the same day, I get several event ID 3 warnings in Event Viewer on my Pavilion Desktop.  Everyone can repeat 2 or 3 times when the computer is started or wakes.  There are 66 warnings until 6 days.  All come from HP health Active.

  Log name: Application

  Source: HP health Active

  Date: 25/11/2015-22:48:55

  Event ID: 3

  Task category: no

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: PC - 1

  Description:

  COM exception running a command GET Casl Diags.PostCodeError = [NO SPECIFIC CASL = 0 x 80041002]: Exception from HRESULT: 0 x 80041002

  ****************************************************************************

  Log name: Application

  Source: HP health Active

  Date: 26/11/2015-05:06:13

  Event ID: 3

  Task category: no

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: PC - 1

  Description:

  COM exception runs a command EXECUTE Casl Diags.ThermalDiagnostics = [NO SPECIFIC CASL = 0 x 80041002]: Exception from HRESULT: 0 x 80041002

  ***************************************************************************

  Log name: Application

  Source: HP health Active

  Date: 26/11/2015-05:05:36

  Event ID: 3

  Task category: no

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: PC - 1

  Description:

  COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = [NO SPECIFIC CASL = 0 x 80041002]: Exception from HRESULT: 0 x 80041002

  I know it's just a warning and it doesn't seem to affect the performance of my computer that I can say, but I would like to know why it's happening.

  Well, I found the task that updates HPSA in Task Scheduler.  I disabled it by using the Properties window.  On the chance someone may be interested, I'll post how it turns out.

  I hope that I can now keep the HPSA listed for my computer with no additional alert to update again HPSA that generates several warnings and is not compatible with my desktop computer Pavilion p6 - 2220t and/or Windows 7 sp1 64-bit operating system.

  This disabled the HPSA update only not any other.  It seems to be a standalone update for HPSA.

• Pavilion g6-2298se bluetooth not found

  Product name: HP Pavilion Notebook PC g6

  Product number: D4A12EA #ABV

  Serial number: [Personal information]        

  Bios:                              F.25 - 29/05/2013

  Processor name: Intel Core i5 - 3210 M CPU @ 2.50 GHZ

  Wireless adapter: Adapter Ralink RT5390

  ================================================

  the problem is that I simply can't find Bluetooth icon on the bar of tasks or in Device Manager.

  Bluetooth driver has been installed on official site.

  Please help... If help to suggest the replacement of the driver please provide links.

  note1: in the name of the adapter is shown in Device Manager:

  RALink RT5390R 802.1 bgn Wi - Fi adapter.

  Note 2: the labtop is new.

  note 3: I use windows 8 Pro.

  

  Yes, there is.

  I would have thought this earlier...

  Here are the two Ralink cards that HP installs in your model series.  See Chapter 3 of the the service manual for the list of cards supported wireless.

  RT3290LE of Ralink 802.11 b/g/n 1 x 1 WiFi and Bluetooth 4.0 Combo Adapter HP part # 690020-001

  RALink RT5390R 802.11 b/g/n 1 × 1 WiFi (some models only) HP Part # 691415-001

  You have the 5390R as your previous screen indicated, if your model has certainly not bluetooth.

  You can order no doubt supplied with bluetooth to HP for the country that you live on the link below and Exchange on the other card.  Change your country at the top right of the page.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=5E1A1A840CFF4EF6B5CF342A0B00A37E&cc=us&lang=en

  Here is the link to the service manual for your laptop.

  Procedures for removal and replacement card WLAN are in Chapter 4.

  http://h10032.www1.HP.com/CTG/manual/c03593041.PDF

  My understanding is that the service door is difficult to remove.

  See this related thread for this info.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavillion-G6-memory-upgrade-problems/m-p/1374715#M6863

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• PC HP Pavilion 15-p028TX NB AL: I have a HP Pavilion 15-p028TX NB PC all THE Windows go unable asking power on password.

  I have a HP Pavilion p028TX 15 NB PC all unable will ask for power on password for windows.  He said disabled system 55541760 after 3 failed attempts.   Help, please!

  Hello

  Enter: 40429366

  Kind regards

  DP - K

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.