How were you completely delete a / profile under vista user account?

Similar Questions

• in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  Example when you right click on a program, you can see Open if you click o the file opens, it was in XP, but not in 7

  That's what you want.

  1 - Open "Control Panel" and go to accessibility.

  2 - click make the keyboard easier to use.

  3. the title of 'Make it easier to use keyboard shortcuts' tick the box 'Underline access keys and keyboard shortcuts' and click 'Ok '.

  Oh sure, it could be useful.

• How do you want to re - build windows vista 32-bit.

  How do you want to re - build windows vista 32-bit. My computer crashed while it was up-to-date.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _________________________________________________________________

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• How do activate you the built-in in Windows Vista administrator account?

  How do activate you the built-in in Windows Vista administrator account?

  1. http://technet.microsoft.com/en-us/library/cc766343 (WS.10) .aspx

  2. http://support.microsoft.com/kb/555910

  To activate the built-in Administrator account, follow these steps:
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

• How can I get the administrator rights on my user account?

  OT: Without administrator rights.

  I don't have my active administrator account.

  I had a user account that I removed myself from the group administrator.

  Now I'm locked to do anything.

  I can't assign me to the admin group, I can't allow the user to administrator, I can't edit some files or delete some software...

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  I can't open the recovery mode, tried to start in safe mode and all the rest.

  How can I get the administrator rights on my user account?

  I had a user account, which I removed myself from the group administrator.

  -> This is called "paint yourself in a corner.

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  -> Is normal. Either you are an administrator, or you're not.

  How can I get the administrator rights on my user account?

  -> Ask a friend to burn a CD repair system for you (Control Panel / backup and restore). Now to use this CD to start the machine in Repair Mode, and then use the system restore to set Windows to a point before you downgrade your one and only the admin account.

  When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.

• I forgot the password for the authorized user account. How am I able to get on the authorized user account

  If I forgot the password for the authorized user account. How am I able to get on the authorized user account? I am the authorized user btw.

  Hello

  1. What do you mean exactly when you say 'authorized user account password'?

  2. who are you referring?

  Are you a person referring Windows user name and password, refer to the article that you give

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

• How can I share 'My images' with the other user accounts on my computer?

  How can I share 'My images' with the other user accounts on my computer?

  where are the 'experts' on these forums adverstised?  I can't get an answer to a simple question.  Does anyone know how to do this?

  Here we are, ok, I'm not an expert, but try this:

  Right click on 'My images' > share > specific people... > select that you want to share this folder with.

  ...

  After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos

• How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  Original title: uac

  How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  You want should not do that. These pop-up UAC is there to ensure the interaction of the user before executing a command or program. Disabling, allows even unwanted programs (= malware, viruses, Trojans) go ahead and implement themselves on your system without being noticed.

• Use of the BAT file - how do you completely remove 150 phones and their associated DNs?

  How do you remove completely 150 phones and their associated DNs? All phones are in the same pool of device. I prefer the way bat.

  The CUCM version: 8.6.2

  Type of phones: 7962 phones - associated with the same device pool.

  Other questions: is there a way to remove all phones and their associated DNs with elegance when all phones are associated with the same mass of device? I rather not work with extensions and MAC addresses.

  Thank you

  Hug Lupas

  Hello hug,

  Using the BAT, it will take 2 - passes. 1 for unassigned phones and 1 for "DN". This is well illustrated in the attached doc;

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/bat/8_0_1/bat-80...

  Of course for the DN you could remove through the road map report > unassigned DN > select all > delete

  See you soon!

  SoC

• How can you change Xbox Live profiles in Windows 8 Xbox app?

  I have a user ID on my computer and creates a user ID for my daughter.  When we opened his ID he loaded my Xbox Live profile.  How can I change the Xbox profile to his do his computer?

  Hi Derek,.

  Thanks for raising the issue on Microsoft Community!

  For more information I suggest you to contact the X - Box team. They would be the right person to help you.

  http://support.Xbox.com/en-us/music-and-video/browse

  If you need additional help, please answer that we will be happy to help you

• How do you completely to shoot a video?

  I wish there was an easier way, or that this has been addressed more directly to the Premier Pro, but often, the orientation of a clip is wrong and must be rotated 90 degrees to be useful. I've highlighted the clip on the timeline, went to effect in the source Panel options, then video effects > Motion > Rotation. Only rotates it the image within a misdirection of the framework, in other words, the same video portrait orientation stays then the image inside the frame is rotated which crops both ends when it is horizontal, because it is always in a vertical orientation framework.

  
  How to rotate the full clip, orientation, framework and this completely?

  A sequence has a fixed image format, the pace and size of the image. It is not editable, dynamically, when a sequence is to play for a different source material. By the sounds of it, you have something similar to a recorded video on a phone in portrait mode. You can create a non-standard resolution project and ratio to greet him, but how do you read? Almost all formats reading waiting for the image is wider than long.

  If you do not want to do, check the resolution of your source material and create a sequence with a custom resolution to exactly match your clip or matches the report if you want to evolve upwards or downwards.

• Windows update KB982110 and KB2272691 are delete my profile from the user when the update and installed

  Whenever my computer updates and installs KB982110 and KB2272691 my user profile is deleted and I find uninstall?  Are these really necessary updates and is it possible to get these updates without user being deleted my profile?

  Hi hunneebun,
  
  These mentioned updates are released to fix application compatibility issues.
   
  It may or may not be important depending on the types of applications you have installed.
   
  However, you can try the following steps and check if they help install the updates without any problem.
   
  Step 1:
   
  Disable all security software temporarily and try to install the updates.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Firewall: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  You can place your computer in a clean boot State and install the standalone updates below.
   
  Note: follow step 7 to your computer as usual.
   
  Stand alone package.
   
  Update for Windows 7 (KB982110)
  Update for Windows 7 (KB2272691)
   
  See also:
   
  http://support.Microsoft.com/kb/982110
  http://support.Microsoft.com/kb/2272691
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Delete the files under C:\Users\MyAccount\CS6 Master Collection\Adobe CS6

  After installation, I was left with a ton of files under C:\Users\Nathan\CS6 Master Collection\Adobe CS6 - 8.3 GB.

  These files are really needed? They seem to be mostly from the installation files. I can remove them right after the installation?

  Hi Nathan,

  The default location for the installation of the software is the folder program files and the default location for the extracted files is the desktop where the installation is launched. You could have chosen the folder above for extraction.

  If you have already installed the software, you can go ahead and delete this folder.

• How to import contacts into the contacts under the user folder people

  Windows 8

  In the contacts folder, you can import a .wab

  The contacts come in fine provided by the user.

  How do you get these contacts to people without downloading to this account and synchronization of accounts and adding accounts and so on and so forth?

  Why can't it's just use these contacts?

  Why must it be so difficult?

  Why can't you take the old email from outlook express and just import it then in mail?

  Windows 8 should be the sytem worst service I've ever seen.

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  You can go through the article and check if it helps.

  If you go to http://people.live.com and choose manage it gives you the ability to import from Outlook as well.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• "You cannot use this product under a guest account" - need help!

  I am trying to use a trial version of Adobe Flash Professional CS6 and I installed it under an Admin account and I am an Admin account, but whenever I try to run the software, a pop box up appears and says "Do not use this product under A guest account", I even went to the trouble of making a new account administrator only for installation and execution of Flash , but the same thing happened. But this question also came with CS5, and those that worked well are CS4 and below, but I'll be happy even if you just give me a link where I can download Adobe Flash Professional CS4 trial. Thanks for all your comments I receive.

  Raj Ubhi.

  P.S. I am using Windows Vista Ultimate 64-bit

  Older versions of the test are expected to be found on the following sites:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  http://technolux.blogspot.com/2011/02/Adobe-direct-download-links-less-Akamai.html