How windows media to play .dss files?

Similar Questions

• Windows media player play MP4 file does

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Yes I can play mp4 with Windows Media Player files

  I use the 12.0.7601.18150 version. It is the version that is part of Windows 7 SP1 for x 64.

  What do you use seems to be part of Windows XP.

  Windows XP does not natively support mp4 files.

  http://support.Microsoft.com/kb/316992/en-us

  Here is a link to VLC.

  http://www.videolan.org/VLC/download-Windows.html

  Moreover, it is a Windows 7 forum.

• Windows Media Player won't play the .zip files. How to see or play these files?

  Media Player

  Windows Media Player won't play the .zip files. How to see or play these files? I'm 67 and not tech savvy thanks for the help.

  Hello

  ZIP files are compressed, so you need to unzip and then play the content if the
  content is of type WMP files.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-GB/Windows7/compress-and-uncompress-files-ZIP-files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows media player plays most audio file but the 0r 5 last 10 seconds are crackling

  Windows media player plays most audio file but the 0r 5 last 10 seconds are crunchy, why?

  The following article might be worth a visit:

  Windows Vista - How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• Help! my Windows media player plays my AVI files but stops and closes at random!

  my Windows media player plays my AVI files but stops and closes at random after about 20 minutes... its only recently started to do this in the last week or 2?

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  After the above - your codec may be damaged or need to be modernised.

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double-click on - check version (64-bit will tell 64bits)

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR those listed above that I prefer.

  K - Lite Codec Pack 5.0.5 & K-Lite Codec Pack 5.0.5 update
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack (64-bit) 2.6.0
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• all my photos were deleted from my computer, but are still in my windows media player how to move images from windows media player in a file

  original title: Windows media player

  Some how all my photos were deleted from my computer, but are still in my windows media player how to move images from windows media player in a file?

  Just an idea that might be worth a try...

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Let us know if the files reappear.

• "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  =========================================
  If you have a DVD decoder (for example Power DVD) try reinstalling it.

  If it is not... Take a look at the following site:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Also, you could try one of the players following freeware that will play DVDs:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Also, it may be interesting to try to install one of the following Codec Packs:

  * Proceed at your own risk *.

  (1) news of CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  (2) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• You received the C00D1199 error message using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  "You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?

  Hello

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Note: This link implies also on Windows vista.

• my windows media player, plays movies but without sound? I do check the updates and seem to be in order

  Why my windows media not play sound

  Thanks for that went out the window / it as you suggested, everything is ok m ais always no sound media player, the sound on the works of laptop very well, it's only when I play through media player, as if there might be a codex missing even though I did my updates for media player.

  What the file type of these movies (AVI, WMV, MPG...)?

  Maybe install AC3Filter or FFDShow will help?

  Tim Baets
  http://www.BM-productions.TK

• Windows Media Player plays only one file at a time

  These days, my Media Player acted upward.  It will play a music/film without problem, but when I try to play multiple files at the same time it hangs and I have to Ctrl-Alt-Delete to stop the player because it does more.  When I try to use it again after t6hat, it doesn't respond at all and will even stop my computer restart/stop, saying that the program is not responding.  How can I fix?

  Update your sound card drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer as well. Who help me? Tim Baets
  http://www.BM-productions.TK

• video in windows media player plays upside down.how to fix

  all videos with windows media player time to down.how can I solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. what version of Windows Media Player?
  3. What is the format of the video files?

  Try the following and see if it helps.

  Method 1:

  Solve the problems of video and other media or Windows Media Player library: http://support.microsoft.com/mats/windows_media_player_diagnostic

  Method 2:

  If you still have the problem then I suggest you to perform system restore to a point when the computer was working fine.

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• Windows media player plays is not the wmv files

  I installed a new version of AMD Catalyst Software Suite V 12.2.00 08/03/11 and immediately pinned the problem of not being able to run the MWV Media Player files.  The media player will turn green and the audio works well.  I guess that my old (2008) Dell Studio 540 Intel Core Quad 2.66 Hz machine is too slow for all graphical applications included in the CCC again.  I uninstalled the entire update and installed the driver more AMD V 8.950.0.0.  Rebooted and tried to execute a file on Media Player WMV.  The same problem.  I went back to a restore point, until the day before the installation of the new version of the Suite software Catalyst.  Then I rolled back to the previous driver V 8.920.0.0.  Does not solve the problem.

  I finally ended up at this place where someone posted the same problem.  I went if the three methods that have been listed.
  Method 1: Go to the Play-year-audio or video file FAQ
  Result: Nothing useful there.

  Method 2: Re-save the file and check, it is that it works.
  Result: Panel received
  DllRegisterServer in successful wmvdecod.dll OK

  Method 3: Change screen Resolution.  My procedure was different from that used by anyone trying to help the first user.  I'm running Windows Vista 64 - bit SP2.  I had to go through the display settings, advanced settings.  Click on change settings and I received the message: your current display driver does not allow changes need to be made to hardware acceleration settings.  I then clicked on the Troubleshooting tab and received the following panel;  Catalyst Control Center cannot be started.  Currently, there are no settings that can be configured using Catalyst Control Center.     No big surprise that I had uninstalled the CCC.  Should I reinstall again?

  Having listed all the codecs on my machine, I have no idea what to do with them.  The only one that seems to apply is WMVideo Decoder DMO.

  My profile is:
  Dell Studio 540 Intel Core Quad 9400 Hz 2.66 6 GB memory
  Vist Windows 64 - bit SP2
  Dell E207WFR ATI Radeon HD 3400 Series
  Driver AMD V 8.920.0.0
  Windows Media Player V 11.0.6002.18311

  Hello

  (1) is there an error message or an error code during playback of .wmv files?

  I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow method 1 to disable audio enhancements.

  Method 1:

  a. Open Sound by clicking on the Start button, and then clicking Control Panel.

  (b) in the search box, type sound, and then click sound.

  c. on the playback tab, click speakers and then click Properties.

  d. click the enhancements tab, and then select turn off check all sound effects box.

  Method 2: Uninstall and reinstall Windows Media Player with Windows features enable or disable:
  Step 1.
  Uninstalling Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and uncheck the brand in the face of Windows Media Player.
  (d) restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  (a) go to start and in the search type "Turn Windows has or not.
  (b) click on "Turn Windows features on or off".
  (c) access of media features and place a check mark in front of the Windows Media Player.
  (d) restart the computer.

• WINDOWS MEDIA PLAYER PLAYS DOES NOT CORRECTLY .avi FILES

  WINDOWS MEDIA PLAYER ONLY PLAYS THE SOUND OF. AVI FILES. VIDEO IS NOT PLAYED. IAM USING WINDOWS MEDIA PLAYER 11. I SEE A RED CROSS MARK, NEXT TO THE NAME OF THE FILE IN "NOW PLAYING".

  WINDOWS MEDIA PLAYER ONLY PLAYS THE SOUND OF. AVI FILES. VIDEO IS NOT PLAYED. IAM USING WINDOWS MEDIA PLAYER 11. I SEE A RED CROSS MARK, NEXT TO THE NAME OF THE FILE IN "NOW PLAYING".

  ===========================================
  The following utility can identify the codec that you need to read files:

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html
  (to download GSpot... left click on 'The GSpot zip file' in the first paragraph)
  ... then... Download the file to your desktop / unzip the file and run it.
  No installation is required)

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Or...

  It might be worth a try to download and install
  a pack of codecs:

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  Info on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to add .exe to Windows Media Player 11 installation files for burning?

  When I go to add the installation .exe files to burn as a data CD in Windows Media Player 11 on Windows Vista Home Premium, I can't find any option to do so.  Windows Media Player 11 claims to have the ability to burn data disks.  Does include the installation .exe files?

  If the Windows Media Player allows you to burn files .exe to install it on a data disc, what are the exact measurements that are needed to add files .exe on the framework 'Items Drag' here burn screen so that I can get this burned cd already.

  Thank you in advance, I look forward to your help!

  Hello

  You need to burn a disc of data as usual without using Windows Media Player

  For more information, see the following article:

  Burn a CD or DVD

  Hope this information is useful.