Similar Questions

• How do you define a point on screen control?

  Normally, on each platform installation, you can select the control screen and I hit the point in.

  On the first hit IN does nothing.  However, there is this little blue bar with a central point.

  

  If I expand it, Hitting IN within this region works.

  

  This is an additional and very heavy step.  Why there is no, and can the professional editors turn off so they... change as usual?

  Works as expected on my system.

  How long is the element of the source that you have loaded into the source monitor?

  You can have the sovereign overview time zoom out so far that you do not see the space between your entry and exit point until you have zoomed in on the time scale.

  MtD

• How do you see the point clip anchor?

  When you work in the effect controls panel, I would like to move the anchor point of the title/clip.  However, it does me much good if I don't see where is this anchor point.  In After Effects, there is a point in the center of the image that shows the anchor point.  Is it possible to catch this show in first Pro CC?  Otherwise, I'm stuck just move the coordinates no visual reference framework.

  In the effect controls panel. Click the motion effect to select - then you should see the wireframe overlay with the anchor point appears in the program monitor.

  MtD

• need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  Most OEM computers have a partition on the hard drive, that allows to give it bought as provided.  Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup.  Look quickly at the first screen that appears, and you could see the key that you press.  Otherwise, go to your computer manufacturer's website and download the manual for your computer.  Instructions must be there.

  HTH,
  JW

• Microsoft Fixit error "an error has occurred when sending your information to Microsoft. How do you proceed? »

  Original title: Microsoft Fix It

  When I use the Microsoft to adapt after the fix I try to send the information to Microsoft I get the following message is displayed: an error has occurred when sending your information to Microsoft. How do you proceed?

  Lisa

  Hi Lisa,

  Please help me with the following information about the issue with the fixit:

  (1) who is the Microsoft Fixit you trying to run?

  (2) what is the problem that you are experiencing when you try to run the fixit?

  (3) is the computer connected to the Internet when you try to send the information after running the fixit?

  This could be a problem with the Microsoft Fixit, you are trying to run.

  If you encounter problems when running Microsoft Fixit, I suggest you to publish the query on the fixit forum. Check out the link:

  http://social.Microsoft.com/forums/en-us/home

  Please let us know if you have more queries on problems with Windows.

• Due to a corrupted windows profile, I had to reinstall ACROBAT PRO XI.  After re - install, I kep "error 16"!  How can you fix this?

  Due to a corrupted windows profile, I had to reinstall ACROBAT PRO XI.  After re - install, I kep "error 16"!  How can you fix this?

  Hello

  Please try the link below

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

  For more details, please visit https://forums.adobe.com/thread/1177032

  You can also consult Re: persistent Configuration 16 error

  Let us know if this helps!

• How do you define the current-time indicator to return to the point that he started on an audio overview?

  in the most recent version of the software, how do you define the current-time indicator to return to the point that he started on an audio overview? He did it in the old version. I don't find a setting for this in 2015 software. Thank you

  You can use the zero on the numeric keypad key. See the sixth in this article:

  known issues in after effects CC 2015 (13.5). After the effects of interest area

• #0184579519 unresolved cases. How do you intend to fix my situation for a product I purchased?

  #0184579519 unresolved cases. How do you intend to fix my situation for a product I purchased?

  Contact Adobe direct http://helpx.adobe.com/contact.html

  These are users of forums frequented by Adobe customers.

  They can only these forums occasionally and only Adobe staff can help you with a case number.

• How do you ZOOM in the MAC DESKTOP version?

  How do you ZOOM in the MAC DESKTOP version?

  There is not a way to zoom in on a Mac as you would on an iPad or an iPhone. The most important that your window can be on the screen is the size limit of the photo.

  Guinot

• How can you fix error #2004

  I just freshly installed Muse CC 2015. I don't create anything in the site, I didn't learn the different features, you can use and things like that. I looked up and I was checking the design page, no problem, but as soon as I click on preview, it gives me this error message and after hours of Google, I found nothing on this subject.

  After you modify the hosts file to remove "adobe" lines, you may need to restart your computer for the changes to take effect.

  Assuming that does not solve the problem, please sent again the file 'MuseLog.txt' now that the hosts file has been cleaned and also please include the email address used for your Adobe ID as part of your message to [email protected]. Thank you.

  How are you connected to the internet? You are inside a firewall server or proxy for business/business / education?

  What, if any, anti-malware software is installed?

• How can you change a text in an image?

  How can you change a text in an image?

  Hi Jasper,.

  It depends on how the text has been staged, and what has been done with the image after that.

  A quick test - what happens when you zoom in on, or enlarge the image?

  If the text retains its edges when amplified, then it can probably be edited separately from the image. If the text begins to show pixelation on the edges (like the picture), then there is no text to change, what looks like adding text is actually part of the image and can only be changed in the same way that you can change anywhere in the image.

  Here is an example:

  

  The photo is a photo (jpeg format), inserted in a Pages document created with the essay template. White text in the upper left corner of the photo is placed in a text box. To put the photo on this page (and the text on and around it) has been converted to a PNG file. When it is enlarged on this screen, the text finally a pixelated image...

  

  .. .the easily noticed in the thin relates diagonal 'o'.

  In Pages, however, the text and the picture are separated, and the text is a vector image - mathematically trained and scalable.

  

  The text here is contained in a text box and the text box was grouped with the photo. To change the text (in Pages), I need to:

  • Click on the text.
    Handles will appear in the corners of the selection.
    That click you select either the entire image OR just simply the text box.
    • IF the handles are blue x characters, the selection is locked
      Go organize (menu) > Unlock
      Sectionals unlocked handles are small white squares.
  • IF the selection includes the entire image
    • Go to the menu, rearrange and choose ungroup
      If the choice to separate is not available, the text may be part of the image and uneditable as text.
      Try to click twice (separated from the clicks, not double click).
      If the insertion point (|) is now in the text, the text is editable as text.
      Change the text.
  • IF the selection looks like a text box and does not the whole image
    • Click on the text to place the insertion point (]) in the text
      Change the text.

  Image showing the insertion point in the text in a text box on the image:

  

  Kind regards

  Barry

• How do you rename a member of a library?

  I just upgraded to LabVIEW 8.2.1 to 8.6. The first vi I loaded changed how drivers for an E3647A Agilent power worked. I was able to fix the problem and got my work vi. I then tried to build an executable with the 8.2.1 project file. He said that he had problems because initialization and the closure of the Agilent E3647A and HP34401A vi libraries were named 'initialize.vi' and 'close.vi '. He wanted me to rename a game so he wouldn't put two different vi in the same target with the same name. Which makes sense, but how do you do? I tried to enter in Program Files / National Instruments/LabVIEW 34401/public 8.6/inst.lib/Agilent and rename the initialize.vi and the close.vi. I then closed and restarted LabVIEW hoping to replace the two vi with the ones I had just renamed, but they presented as question marks in the menus. I tried to replace it with select a vi and accessing to the renamed VI, but they cam in as broken with the explanation that they were supposed to be part of a library, but were not. I have closed all without saving changes, renamed the original name of the vi, restarted LabVIEW and went back to my starting point. So far that I've never needed to create or modify a library, so any help would be welcome.

  I found the answer. I had not used the Manager LLB before and after several wrong turns, I figured out how to rename vi in the library. Now that I made the big jump, I will learn everything I need to know and add a new tool to my own knowledge base.

• How do you remove Security Shield

  Original title: remove security shield

  How do you remove program

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
  better to be too full now than to pay the price much later. Check with these extreme
  Overkill point and then run the cleaning only when you are sure that the system is clean.

  My Security Shield is a fake antivirus, a scam to get you to pay for it, while he has no advantage
  Not at all.

  Remove my security shield (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-my-security-shield

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
  took (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro
  --------------------------------------------

  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  --------------------------------------------

  Also do to the General corruption of cleaning.

  For Vista:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------

  For Windows 7:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I know how to uninstall programs; However, how can you say that programs are essential to the functioning of my laptop

  I think I know how to uninstall programs; However, how can you say that programs are essential to the functioning of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please.     Give me a list for computer idiots or something. Thanx.

  I think I know how to uninstall programs; However, how can you say that programs are essential to the operation of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please.     Give me a list of idiots to computer or something. Thanx.

  Hello

  There is no list of what you don't need.

  We don't know what programs you have, or what you use.

  It is your personal choice.

  @@@@@@@@@@@@@@@@@@@@@

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• How can you get alphabetical order of folders

  How can you alphabetically in OS X El Capitan 10.11.6 records

  At apple has fixed this problem?

  Jimi

  Manually.